12580406_SPI.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BM

JS

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12580435 (19207) ARMOR PLATE – ACCESS COVER, UPPER 19207 AK16494953

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2510-01-649-4953 December 4, 2017

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 322.0 26.455 87.3 X 49.4 X 10.6

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 10

13. CLEANING

MIL-STD-2073-1 1-B - BLOCKING/BRACING: SEE NOTE

14. DRYING

MIL-STD-2073-1 2-C AR BARRIER MATERIAL: MIL-PRF-121, TY II

15. PACKING

3-D 1 CUSHIONING: A-A-59135, CL 2, GR A,

a. LEVEL A SIZE: 56 X 40

MIL-STD-2073-1 & NOTE F

b. LEVEL B 4-E 1 CONTAINER: ASTM D6880 (MODIFIED), CL 2, ST 1

NOT APPLICABLE SIZE: 84-1/2 X 46-7/8 X 4-7/8

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER

SPECIFICATION.

B. FABRICATE BLOCKS “A” THROUGH “E” IN ACCORDANCE WITH CHART ON PAGE 2. SECURE BLOCKING

TO CONTAINER USING ASTM F1667 NAILS AS SHOWN IN SKETCHES ON PAGES 2 AND 3.

C. APPLY BARRIER MATERIAL BETWEEN ALL SECTIONS OF THE ARMOR PLATE THAT COME IN DIRECT

CONTACT WITH THE INTERIOR OF THE CONTAINER AND/OR BLOCKING/BRACING.

D. PLACE ARMOR PLATE IN CRATE AS SHOWN IN SKETCH ON PAGE 4. APPLY A SINGLE LAYER OF

CUSHIONING TO THE UNDERSIDE OF BLOCKS “D” AND “E” WHERE BLOCKING COMES IN DIRECT

CONTACT WITH ARMOR PLATE.

E. CONTAINER IS CONSTRUCTED OF 1-INCH THICK NOMINAL LUMBER WITH 2-INCH THICK NOMINAL ONE

PIECE ENDS. CONTAINER IS MODIFIED TO INCLUDE BATTENS AND THREE BEVELED SKIDS. BATTENS

AND SKIDS SHALL BE IN ACCORDANCE WITH ASTM D6880.

F. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12580435 (19207) ARMOR PLATE – ACCESS COVER, UPPER 19207 AK16494953

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2510-01-649-4953 December 4, 2017

BLOCK DESCRIPTION QTY NOTE

A LUMBER: 2 X 4 (NOM) X 44-78 1

B LUMBER: 2 X 4 (NOM) X 33-7/8 2

C LUMBER: 2 X 4 (NOM) X 38-1/8 1

D LUMBER: 2 X 4 (NOM) X 40 2

E LUMBER: 2 X 4 (NOM) X 56 1

NOTE:: LUMBER SHALL BE IN ACCORDANCE WITH ASTM D6199, GROUP I OR II.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages

CC

BB

AA

BLOCKING INSIDE OF CONTAINER

(2 PLACES)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12580435 (19207) ARMOR PLATE – ACCESS COVER, UPPER 19207 AK16494953

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages

BOTTOM SIDE OF LID

REF

DD

EE

(2 PLACES)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12580435 (19207) ARMOR PLATE – ACCESS COVER, UPPER 19207 AK16494953

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages

WRAP AND

CUSHIONING NOT

SHOWN FOR CLARITY

TOP CUT AWAY FOR

CLARITY