SPI_AK16093483.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K6555 (19207) HULL PCB WITH CONTAINER 19207 AK

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 21.0 2.081 21.2 X 16.0 X 10.6

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 44 1C 5 CAP: NAS813 OR EQUIVALENT.

13. CLEANING

MIL-STD-2073-1 2D 1 BAG: MIL-DTL-117, TYPE I, CLASS F, STYLE 1,

14. DRYING SIZE: 18 X 18.

MIL-STD-2073-1

3E 1 CONTAINER: SEE DRAWING 18142-0501.

15. PACKING

a. LEVEL A

MIL-STD-2073-1 AND NOTE G

b. LEVEL B

MIL-STD-2073-1 AND NOTE G

16. MARKING

MIL-STD-129 AND NOTE F

17. NOTES / DRAWING

A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.

B. PACKAGING OF THIS ESD SENSITIVE ITEM MUST BE ACCOMPLISHED IN AN ESD PROTECTED AREA IN

ACCORDANCE WITH MIL-STD-1686.

C. PLACE CAPS OVER ELECTRICAL CONNECTORS. IF HULL POWER CONTROL BOX IS RECEIVED WITH CAPS IN

PLACE, THIS STEP MAY BE ELIMINATED.

D. CLOSE BAG BY HEAT SEALING.

E. PLACE PART INTO CONTAINER AS SHOWN ON PAGE 2. SECURE ALL LATCHES ON CONTAINER.

F. MARKING:

1. SPECIAL MARKING OF “REUSABLE CONTAINER, DO NOT DESTROY” SHALL BE ADDED TO THE UNIT

CONTAINER.

2. THE FOLLOWING FIELDS SHALL BE COMPLETED ON THE CONTAINER IDENTIFICATION PLATE:

a. ITEM PART NUMBER

b. ITEM NAME

c. ITEM WITH CONTAINER PART NUMBER

3. ADDITIONAL MARKING SHALL HAVE THE SENSITIVE ELECTRONIC DEVICE SYMBOL AND THE

ASSOCIATED CAUTION LABEL EMPLOYED AS IT IS SPECIFIED IN MIL-STD-129 ON THE UNIT PACK.

G. PACKING IS NOT REQUIRED. THE LEVEL A UNIT CONTAINER IS AN ACCEPTABLE LEVEL A SHIPPING

CONTAINER.

H. INSPECT THE PRESERVATION AND THE UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

PART NO. 12521467

HULL POWER CONTROL BOX

PART NO. 18142-0501

CONTAINER

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-C

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K6555 (19207) HULL PCB WITH CONTAINER 19207 AK

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION