SPI_674.pdf

PDF 25 KB Posted

Attached to
Carrier Assembly Federal contract opportunity
Solicitation number
SPRDL1-17-R-0533
Issued by
Department of the Army Materiel Command TACOM Life Cycle Management Command

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12288214 (19207) CARRIER ASSEMBLY 19207 AK11681483

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-168-1483 1-24-2007 B

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 152.0 5.483 22.1 X 22.1 X 19.4

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42 SEE NOTES.

13. CLEANING

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE G

b. LEVEL B

MIL-STD-2073-1D AND NOTE G

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE

ACCOMPANYING PAGES.

B. WRAP PART WITH CUSHIONING, ITEM 1, AND SECURE WITH TAPE.

C. PREPARE CONTAINER WITH CUSHIONING AS SHOWN ON PAGE 2. PLACE CUSHIONING, ITEM 2A, INTO THE BASE OF THE CONTAINER, ITEM3. PLACE CUSHIONING, ITEM 2B, INTO THE SIDES OF THE CONTAINER, AND PLACE CUSHIONING, ITEM 2C, INTO THE ENDS OF THE CONTAINER, MAKING A

CUSHIONED CUBED AREA TO RECEIVE THE BAGGED ASSEMBLY.

D. PLACE WRAPPED PART INTO PREPARED CONTAINER AND PLACE THE FINAL PIECE OF CUSHIONING, ITEM 2A, INTO THE TOP OF THE CONTAINER TO COMPLETE THE CUSHIONING ENCLOSURE OF THE PART.

CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

E. CLOSE BAG, ITEM 4, BY HEAT SEALING.

F. CLOSE CONTAINER, ITEM 5, IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.

G. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO

ASTM-D6251, TYPE III, CLASS 1.

LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND

REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.

FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME

DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-

HDBK-774 MAY BE USED FOR GUIDANCE.

H. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-

1D AND THE APPLICABLE CONTAINER SPECIFICATION.

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12288214 (19207) CARRIER ASSEMBLY 19207 AK11681483

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-168-1483 1-24-2007 B

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages

2A

2B

2A

2CP/N 12288214

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12288214 (19207) CARRIER ASSEMBLY 19207 AK11681483

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-168-1483 1-24-2007 B

BILL OF MATERIALS

ITEM

NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.

1 CUSHIONING 32 X 45 A-A-59135, CLASS 1, GRADE A. 1

2 CUSHIONING A-A-59136, TYPE II, CLASS 1,

GRADE A.

2A 21-1/4 X 21-1/4 X 2 2 2B 21-1/4 X 13-3/4 X 2 2 2C 17-1/4 X 13-3/4 X 2 2

3 CONTAINER 21-1/4 X 21-1/4 X 17-

3/4

ASTM-D5118, TYPE CF, STYLE RSC,

VARIETY SW, CLASS D, GRADE 275.

4 BAG 42 X 43 MIL-DTL-117, TYPE I, CLASS E,

STYLE 1.

5 CONTAINER 21-3/4 X 21-3/4 X 18-

5/8

ASTM-D5118, TYPE CF, STYLE RSC,

VARIETY SW, CLASS WR, GRADE W5c.

File details come from the government source that posted it.