SPRBL1-20-Q-0022 Exhibit A (Technical Requirements Document).pdf

Exhibit A SPRBL1-20-Q-0022 Page 1 of 4 Issue: 20 December 2019

TECHNICAL REQUIREMENTS

WARFIGHTER INFORMATION NETWORK - TACTICAL (WIN-T) INCREMENT 1

NSN Nomenclature

7025-01-599-8399 INTERFACE UNIT AUTOMATIC

Exhibit A SPRBL1-20-Q-0022 Page 2 of 4

TABLE OF CONTENTS

1.0 SCOPE

2.0 APPLICABLE DOCUMENTS

3.0 CONFIGURATION BASELINE

4.0 Unique Identification (UID)

4.1 Unique Identification (UID) Marking

4.2 UID Data Submission Guidance

5.0 PACKAGING

5.1 Preservation, Packing and Marking Instructions

5.2 Wood Packing Material

Exhibit A SPRBL1-20-Q-0022 Page 3 of 4

1.0 SCOPE

This Performance Work Statement defines the efforts required to produce or procure all of the products required by this solicitation in support of Warfighter Information Network-Tactical (WIN-T) Increment 1 in accordance with the Documents listed below.

2.0 APPLICABLE DOCUMENTS

Military and Federal Standards MIL-STD-129R Military Marking for Shipment and Storage MIL-STD-130N Identification Marking of U.S. Military Property

Other Documents DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM)

Commercial Documents ASTM D3951-15 Standard Practice for Commercial Packaging

3.0 CONFIGURATION BASELINE

The applicable Configuration Baselines (CB), for the listed Configuration Item (CI), are as listed in the table below.

NSN Nomenclature CAGE Company Manufacturer Part Number

7025-01-599-8399 INTERFACE UNIT AUTOMATIC 0U834 COMTROL

Corporation 99455-8

4.0 UNIQUE IDENTIFICATION (UID)

4.1 UNIQUE IDENTIFICATION (UID) MARKING

The Contractor shall ensure that all delivered equipment meeting the UID criteria is marked and the applicable data is submitted to the DOD UID Repository. The Contractor shall comply with DFARS 252.211-7003, Item Identification and Valuation, to provide UID, or DOD-recognized unique identification equivalent, for all applicable equipment items with an acquisition cost of $5000 or more. UID markings shall be per the latest version of MIL-STD-130. Guidance for UID marking of embedded components shall be per the latest version of MIL-STD-130 and the http://www.acq.osd.mil/dpap/pdi/uid/ website.

4.2 UID DATA SUBMISSION GUIDANCE

The Contractor shall submit UID data via the Wide Area Work Flow (WAWF) Paperless Contracting Environment per the latest published guidance.

Exhibit A SPRBL1-20-Q-0022 Page 4 of 4

5.0 PACKAGING

5.1 Preservation, Packing and Marking Instructions

Packaging shall be in accordance with ASTM D3951-15 Standard Practice for Commercial Packaging. Level of Preservation (LOP): Commercial, Level of Pack (LPK): Commercial, Quantity Unit Pack (QUP): 001.

Marking shall be IAW MIL-STD-129R. MIL-STD-129R is applicable.

5.2 Wood Packing Material

Wood packing material includes pallets. See DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM).