A019_-_SPRBL119Q0150_Solicitation_Signed.pdf

REQUEST FOR QUOTATION This RFQ is is not a small business set-aside Page Of

(This is NOT an Order)

1. Request No. 2. Date Issued 3. Requisition/Purchase Request No. 4. Cert For Nat Def. Under BDSA Rating

See Schedule Reg. 2 and/or DMS Reg. 1 5A. Issued By 6. Deliver by (Date)

See Schedule

7. Delivery

FOB Other Destination

5B. For Information Call: (Name and telephone no.) (No collect calls)

8. To: Name and Address, Including Zip Code 9. Destination (Consignee and address, including Zip Code)

See Schedule

10. Please Furnish Quotations to the Issuing Office in Block 5A On or Before Close of Business (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please indicate on this form and return it to the address in Block 5B. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services.

Supplies are of domestic origin unless otherwise indicated by quoter. Any interpretations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. Schedule (Include applicable Federal, State, and local taxes)

Item Number (a)

Supplies/Services (b)

Quantity (c)

Unit (d)

Unit Price (e)

Amount (f)

(See Schedule)

12. Discount For Prompt Payment a. 10 Calendar Days b. 20 Calendar Days c. 30 Calendar Days d. Calendar Days % % % Number Percentage

NOTE: Additional provisions and representations are are not attached.

13. Name and Address of Quoter (Street, City, County, State and 14. Signature of Person Authorized to Sign 15. Date of Quotation Zip Code) Quotation

16. Signer

a. Name (Type or Print) b. Telephone

Area Code

c. Title (Type or Print) Number

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 18 (Rev. 8-95) PREVIOUS EDITIONS NOT USABLE 18-118 Prescribed by GSA-FAR (43 CFR) 53.215-1(a)

X

SPRBL1-19-Q-0150 2019SEP20 DOA7

SPRBL1DLA LAND AT ABERDEEN

6565 SURVEILLANCE LOOP, ROOM C1301

APG, MD 21005-1846

MEGAN N. MAHER (443)861-4545

DSCC ZLAA

EMAIL: MEGAN.MAHER@DLA.MIL

X

2019OCT21

1 30

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: MEGAN N. MAHER

Buyer Office Symbol/Telephone Number: DSCC ZLAA/(443)861-4545

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

THIS ACQUISITION IS BEING CONDUCTED UNDER SPECIAL EMERGENCY PROCUREMENT AUTHORITY (SEPA)

*** END OF NARRATIVE A0001 ***

NAICS CODE: 334290

Size Standard: 750

Part I INSTRUCTIONS FOR SUPPLIERS AND EVALUATIONS OF OFFERS

1. This solicitation, called DLA Land at Aberdeens Master Solicitation for Acquisitions Using Simplified Acquisition Procedures (herein referred to as the Aberdeen Master Solicitation), is used by the DLA Land at Aberdeen contracting office to issue requests for quotations (RFQ) and awards of purchase orders for acquisitions up to the simplified acquisition threshold (SAT). Suppliers are required to read this Aberdeen Master Solicitation and all applicable documents and comply with terms and conditions established. Updated

Aberdeen Master Solicitations will be identified by a date and revision number.

2. The Aberdeen Master Solicitation contains multiple parts. Part I instructs suppliers in the submission of quotations and award evaluation. Part II contains the mandatory provisions and clauses, conditional provisions and clauses, and procurement notes that apply to the RFQs and purchase orders. Provisions, clauses, and procurement notes are incorporated by reference. They have the same force and effect as the full text.

NOTE: In some cases, clauses incorporated in Part II will appear in solicitation and award documents. When a conflict arises, the provisions and clauses in the main solicitation or award document will take precedence over the version listed in Part II of the

Aberdeen Master Solicitation.

3. Instructions for Offerors

a) SUBMITTING QUOTATIONS: Contractor shall submit the solicitation document through the Government Point of Entry (www.fbo.gov ) or electronically to the point of contact (POC) identified on the solicitation document. Quotes via any other method will not be considered for award.

b) RETURN DATE AND TIME: The time for receipt of quotations will be on the solicitation and the Government Point of Entry. In case of a conflict, the later of the two times will be used.

c) LATE QUOTATIONS: Quotations received after the return date/time for automated solicitations may be considered until the evaluation process begins. Once the evaluation process begins, late quotations will only be considered if the contracting officer determines that considering the late quotation is in the best interest of the Government and would not unduly delay the award.

d) QUOTATION REVISIONS: Suppliers may revise quotations up until the time the solicitation is awarded by contracting the point of contact on the solicitation document.

e) QUOTATION WITHDRAWAL: Suppliers may withdraw quotations until the time the solicitation is awarded by contacting the point of contact on the solicitation document.

(f) SET-ASIDE SOLICITATIONS: Solicitations with an estimated dollar value between the micro

-purchase threshold and the SAT are set-aside for small business when cited in the solicitation. When a solicitation is set-aside, only small business quotations that comply with the non-manufacturer rule will be considered. See FAR 19.502-2(c) for an explanation.

(g) SOLICITATIONS WITH FAT OR PRODUCTION LOT TESTING REQUIREMENTS: This procurement is limited to consideration of quotes for items produced by sources that are currently eligible for waiver of first article testing requirements.

If the successful awardee offered an item produced by a source waived from first article testing, the item supplied shall be of the same design and manufactured by the same method at the same facilities as the item previously approved.

2 30

SPRBL1-19-Q-0150

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

At the Governments discretion, offers for items produced by sources other than those identified above may be considered for award, if supporting documentation is provided with the offer: 1) Contract Numbers, Dates, and Issuing Government Agency or Agencies, 2) Item previously furnished, identified by part number, type, model number, etc. 3) Engineering control document/change number of item previously furnished, 4) There have been no changes to manufacturing processes, tooling, or locations.

h) QUANTITY REQUIREMENTS: Quotation must be submitted on the total quantity of each item.

i) DELIVERY REQUIREMENTS: The Government required delivery will be stated in days after date of order (ADO). If the supplier is not able to meet the delivery requirement, the supplier must submit their delivery timeframe on the solicitation document in section B in number of days ADO. This includes time to deliver production quantity, required testing, and government inspection and acceptance. If a FAT is required, the supplier must also comply with the FAT delivery requirement and if unable to comply, must submit their delivery timeframe on quote page in number of days ADO. This includes time to deliver the completed test report (if contractor FAT).

j) SURPLUS: Surplus offers will not be considered.

k) Questions regarding the solicitation should be referred to the POC on the solicitation document or the POC identified in the

Government Point of Entry.

4. Evaluation of Quotations

a) Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the

Government. Past performance, offered delivery, and price will be evaluated when making a comparative assessment of quotes. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s).

b) ALTERNATE OFFERS: Alternate offers will not be considered for award. Alternate offers may be submitted to the POC identified in the solicitation for evaluation for future procurements.

c) NOTICE OF AWARD: Purchase orders are based on a submitted quotation. Suppliers are requested to notify the administrative contracting officer, within 14 days after receiving the notice of award, when they will not perform in accordance with a purchase order. Failure to provide prompt notice will adversely affect your past performance evaluation if the purchase order is later cancelled at other than the

Governments request.

Part II PROVISIONS, CLAUSES, AND PROCUREMENT NOTES

The following websites are provided to suppliers to obtain the full text of the FAR, DFARS, and DLAD provisions, clauses, and

Procurement Notes listed below: https://www.acquisition.gov , http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html , http://www.dla.mil/hq/acquisition/offers/DLAD.aspx and http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx .

All provisions, clauses, and procurement notes are incorporated herein by reference with the same force and effect as if set forth in full text, and made a part of the solicitation/order as applicable. The submission of a quotation in response to a RFQ that references this document constitutes the suppliers compliance with the representations and certifications and acceptance of the individual clauses, provisions, and procurement notes incorporated by reference herein. Certain representations and certifications may be required as part of a quotation. Please complete these representations and certifications in the solicitation document. Please review additional representations and certifications within the System for Award Management. Suppliers are reminded that all provisions incorporated herein by reference remain binding in their entirety. Any penalties for misrepresentation contained in the reference clauses and provisions apply.

SUBPART A Mandatory FAR, DFARS, and DLAD Provisions and Clauses

Please refer to Part II, Subpart A of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for Automated

Simplified Acquisitions in effect at the time of award.

SUBPART B Conditional FAR, DFARS, and DLAD Provisions and Clauses

Please refer to Part II, Subpart B of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of conditional

FAR, DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for Automated

Simplified Acquisitions in effect at the time of award.

SUBPART C Procurement Notes

Please refer to Part II, Subpart C of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, 3 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx . Suppliers shall comply with the DLA Master Solicitation for Automated

Simplified Acquisitions in effect at the time of award.

*** END OF NARRATIVE A0002 ***

This acquisition is an Indefinite-Delivery Contract (IDC) under the Simplified Acquisition Threshold (SAT).

Estimated Value: $48,425

Best Estimated Quantity:

NSN 5985-01-604-1717

Year 1: 2

Year 2: 1

Year 3: 1

Year 4: 2

Year 5: 2

Contract Maximum: $750,000

Guaranteed Minimum: $5,553

Duration: Five (5) years

H06 Unilateral Indefinite-Delivery Contract (IDC) Below the Simplified Acquisition Threshold (SAT) (SEP 2017)

(1) The Government will award an IDC below the SAT resulting from this request for quote to the responsible offeror whose offer conforming to the terms and conditions in the request for quote will be most advantageous to the Government, price and other factors considered.

(2) Acceptable contractor performance on the initial delivery order creates the IDC below the SAT, and is agreement by the contractor to accept additional orders under the same terms and conditions specified in the basic award.

(3) Once the guaranteed minimum quantity for the IDC is met, the Government is under no obligation to place additional orders. The

Government may place additional orders for the period of performance stated in the basic award, effective from the award date. All additional orders will reference the basic award, which documents the terms and conditions of the IDC. The maximum aggregate value of orders under the IDC below the SAT is stated in the basic award; the aggregate value of all orders will not exceed the simplified acquisition threshold or, for IDCs below the SAT using FAR Subpart 13.5, the thresholds in 13.500(a).

(4) Pricing of orders. The unit price for orders is based on the price for the quantity range that will cover the total quantity on the order, regardless of destination, if applicable.

ORDERING: In the event two or more orders are placed for the same NSN on the same delivery schedule within a 60 calendar day timeframe, the orders will be combined, and the Government will receive the price benefit of the larger combined quantity as if the orders had been placed at the same time. In the event of this occurrence, the Contracting Officer will adjust the unit prices accordingly on the delivery orders in question. Delivery Schedules will be unaffected by the combination of the orders described herein. Orders that are placed on the same NSN on the same delivery schedule within a 60 calendar day timeframe that cross over two contract years are subject to the order combination and price adjustment provision above, the pricing on the schedule for the earlier contract year will apply for the combined quantity.

Acclerated Delivery is authorized and encouraged at no additonal expense to either party.

Early and partial shipments at no additional cost the Government are acceptable/authorized/encouraged.

*** END OF NARRATIVE A0003 ***

4 30

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SUPPLIES OR SERVICES AND PRICES/COSTS

0001 PRODUCTION QUANTITY YEAR 1 $ __________________________ __________________

See Range Pricing

NSN: 5895-01-604-1717

COMMODITY NAME: MAST SECTI

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 3JWX5

Mfr Part Number: BSM2-M-M209-AL2-000

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 3 $

4 6 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-2073-1E

LEVEL PRESERVATION: Military

LEVEL PACKING: B

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

1001 PRODUCTION QUANTITY YEAR 2 $ __________________________ __________________

See Range Pricing

NSN: 5895-01-604-1717

COMMODITY NAME: MAST SECTI

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 3JWX5

Mfr Part Number: BSM2-M-M209-AL2-000

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 3 $

4 6 $

5 30

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-2073-1E

LEVEL PRESERVATION: Military

LEVEL PACKING: B

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

2001 PRODUCTION QUANTITY YEAR 3 $ __________________________ __________________

See Range Pricing

NSN: 5895-01-604-1717

COMMODITY NAME: MAST SECTI

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 3JWX5

Mfr Part Number: BSM2-M-M209-AL2-000

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 3 $

4 6 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-2073-1E

LEVEL PRESERVATION: Military

LEVEL PACKING: B

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

6 30

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

3001 PRODUCTION QUANTITY YEAR 4 $ __________________________ __________________

See Range Pricing

NSN: 5895-01-604-1717

COMMODITY NAME: MAST SECTI

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 3JWX5

Mfr Part Number: BSM2-M-M209-AL2-000

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 3 $

4 6 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-2073-1E

LEVEL PRESERVATION: Military

LEVEL PACKING: B

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

4001 PRODUCTION QUANTITY YEAR 5 $ __________________________ __________________

See Range Pricing

NSN: 5895-01-604-1717

COMMODITY NAME: MAST SECTI

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 3JWX5

Mfr Part Number: BSM2-M-M209-AL2-000

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 3 $

4 6 $

7 30

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-2073-1E

LEVEL PRESERVATION: Military

LEVEL PACKING: B

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

5001 BASIC CLIN FOR ELIN ___________________

A001 CDRL-SCIENTIFIC AND TECHNICAL REPORTS $ ** NSP ** $ ** NSP ** _____________________________________ ______________ __________________

COMMODITY NAME: CONFIGURATION CONTROL

CLIN CONTRACT TYPE:

Firm Fixed Price

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

FOB POINT: Destination

B001 CDRL-OBSOLESCENCE ALERT NOTICE $ ** NSP ** $ ** NSP ** ______________________________ ______________ __________________

COMMODITY NAME: CONFIRGURATION CONTROL

CLIN CONTRACT TYPE:

Firm Fixed Price

Packaging and Marking _____________________

8 30

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(SPRBL1) DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6565 SURVEILLANCE LOOP, ROOM C1301

APG, MD 21005-1846

C001 CDRL-SCIENTIFIC AND TECHNICAL REPORTS $ ** NSP ** $ ** NSP ** _____________________________________ ______________ __________________

COMMODITY NAME: DMSMS ALT. SOLUTIONS & REPORT

CLIN CONTRACT TYPE:

Firm Fixed Price

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(SPRBL1) DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6565 SURVEILLANCE LOOP, ROOM C1301

APG, MD 21005-1846

D001 CDRL-ENGINEERING CHANGE PROPOSAL $ ** NSP ** $ ** NSP ** ________________________________ ______________ __________________

COMMODITY NAME: ENGINEERING CHANGE PROPOSAL

CLIN CONTRACT TYPE:

Firm Fixed Price

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

9 30

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(SPRBL1) DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6565 SURVEILLANCE LOOP, ROOM C1301

APG, MD 21005-1846

E001 CDRL-REQUEST FOR VARIANCE $ ** NSP ** $ ** NSP ** _________________________ ______________ __________________

COMMODITY NAME: REQUEST FOR VARIANCE

CLIN CONTRACT TYPE:

Firm Fixed Price

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(SPRBL1) DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6565 SURVEILLANCE LOOP, ROOM C1301

APG, MD 21005-1846

F001 CDRL-NOTICE OF REVISION $ ** NSP ** $ ** NSP ** _______________________ ______________ __________________

COMMODITY NAME: NOTICE OF REVISION

CLIN CONTRACT TYPE:

Firm Fixed Price

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

10 30

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(SPRBL1) DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6565 SURVEILLANCE LOOP, ROOM C1301

APG, MD 21005-1846

11 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

PACKAGING AND MARKING

SECTION D Packaging and Marking________________________________

Refer to Section B for packaging and marking requirements.

PACKAGING: Packaging shall be in accordance with, (IAW):_________

ASTM D 3951-15, MIL-STD-2073-1E, Special Packing Instructions, (SPI), or as otherwise specified.

The packaging requirements may also be included in the Technical Requirements Document (TRD), if included under Section J.

MARKING: Marking shall be IAW MIL-STD-129R._______

GENERAL:_______

Level of Preservation (LOP): Military

Level of Pack (LPK): Military

Quantity Unit Pack (QUP): 001.

*** END OF NARRATIVE D0001 ***

INSPECTION AND ACCEPTANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

http://farsite.hill.af.mil/ or https://www.acquisition.gov/

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

1 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE AUG/1996

2 52.246-16 RESPONSIBILITY FOR SUPPLIES APR/1984

E06: Inspection and Acceptance at Origin (SEP 2016)

The contractor shall indicate the location where supplies will be inspected:

Commercial and Government Entity (CAGE) code:___________________________________

Address:_____________________________________________________________________ Applicable to contract line-item numbers(s)

(CLIN(s)):________________________________

The contractor shall indicate the location where packaging will be inspected:

( ) Same as for supplies OR

12 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CAGE code: __________________________________________________________________

Address: _____________________________________________________________________

Applicable to CLIN(s): __________________________________________________________

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

The inspection location for supplies is the awardees CAGE CODE address unless otherwise indicated in the contract/purchase order.

Inspection will be conducted by the Governments Quality Assurance Representative (QAR). Inspection of packaging, if required, may be conducted at the packaging location cited in the award.

SECTION I (All Awards)

a. Objective evidence of conformance with all contract quality assurance requirements must be present at the inspection location. When requested, manufacturer drawings and technical information and complete records of all inspection work performed to verify that the supplies meet technical requirements shall be provided. If required to determine conformity with contract requirements, subcontractor records shall also be provided.

b. Objective evidence to establish the location of the actual manufacturing source may also requested to confirm the end product country of origin and/or business size of the manufacturer.

c. If the supplier is not the manufacturer of the supplies, objective evidence must be furnished to establish the supplies were produced by an approved manufacturer o approved source.

d. The QAR is required to notify the Post Award Administrator (PCO), if at time of Government Source Inspection (GSI), the QAR is denied access to the offerors facility. If supplies being provided are described only by manufacturers name/CAGE Code and part number, objective evidence must be furnished to establish that the supplies were manufactured under the direction of or under agreement with the

CAGE Code of the part number offered.

e. The QAR may require additional examinations and tests to determine:

i. Completeness of item

ii. Material is new and unused

iii. Absence of rust

iv. Contamination, or deterioration

v. Correct identification/item marking 824 vi. Correct packaging

vii. Absence of any damage

viii. Compliance with preparation for delivery

(End of TQ Requirement)

*** END OF NARRATIVE E0001 ***

DELIVERIES OR PERFORMANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

http://farsite.hill.af.mil/ or https://www.acquisition.gov/

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

3 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION MAR/2016

(a) Definitions. As used in this clause--

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier

13 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards

Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html .

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Governments unit acquisition cost" means

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the

Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the

Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459 .

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique

14 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

0001-4001_________ MAST SECTI__________

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

N/A

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in

Attachment Number exhibit A.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in

Attachment Number n/a.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC

International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI

MH 10.8.2 Data Identifier and Application Identifier Standard.

15 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International

Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2

Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air

Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer

Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of

U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of

MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and

Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material

Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Governments unit acquisition cost.

16 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material

Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at

252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/ ; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number -7-, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by contract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

17 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT CLAUSES

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

http://farsite.hill.af.mil/ or https://www.acquisition.gov/

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

4 52.202-1 DEFINITIONS NOV/2013

5 52.203-5 COVENANT AGAINST CONTINGENT FEES MAY/2014

6 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT SEP/2006

7 52.203-7 ANTI-KICKBACK PROCEDURES MAY/2014

8 52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR MAY/2014

IMPROPER ACTIVITY

9 52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY MAY/2014

10 52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS OCT/2010

11 52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT PAPER MAY/2011

12 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS OCT/2018

13 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE OCT/2018

14 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE JUL/2016

15 52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES JUL/2018

DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED ENTITIES

16 52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO AUG/2019

SURVEILLANCE SERVICES OR EQUIPMENT

17 52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH OCT/2015

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

18 52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY OCT/2018

MATTERS

19 52.222-19 CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES JAN/2018

20 52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING AUG/2011

21 52.232-1 PAYMENTS APR/1984

22 52.232-8 DISCOUNTS FOR PROMPT PAYMENT FEB/2002

23 52.232-11 EXTRAS APR/1984

24 52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014) -- ALTERNATE I (APR 1984) APR/1984

25 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS JUN/2013

26 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS DEC/2013

27 52.233-3 PROTEST AFTER AWARD AUG/1996

28 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM OCT/2004

29 52.242-13 BANKRUPTCY JUL/1995

30 52.243-1 CHANGES--FIXED PRICE AUG/1987

31 52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) APR/1984

32 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS SEP/2011

33 252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-CONTRACT- DEC/2008

RELATED FELONIES

34 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS SEP/2013

35 252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT APR/1992

36 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING OCT/2016

37 252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT MAY/2016

38 252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE MAY/2019

GOVERNMENT OF A TERRORIST COUNTRY

39 252.225-7048 EXPORT-CONTROLLED ITEMS JUN/2013

40 252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC APR/2019

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS

41 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS DEC/2018

42 252.232-7010 LEVIES ON CONTRACT PAYMENTS DEC/2006

43 252.243-7001 PRICING OF CONTRACT MODIFICATIONS DEC/1991

44 252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT DEC/2012

45 252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS JUN/2013

46 52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS DEC/2014

The Contractor's representations and certifications, including those completed electronically via the System for Award Management (SAM), 18 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

are incorporated by reference into the contract.

(End of clause)

47 52.213-4 TERMS AND CONDITIONS--SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL AUG/2019

ITEMS)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses that are incorporated by reference:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of

Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(ii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other

Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iii) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019)

(Section 889(a)(1)(A) of Pub. L. 115-232).

(iv) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

(v) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(vi) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

(vii) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(viii) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(ix) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78 (19 U.S.C. 3805 note).

(2) Listed below are additional clauses that apply:

(i) 52.232-1, Payments (APR 1984).

(ii) 52.232-8, Discounts for Prompt Payment (FEB 2002).

(iii) 52.232-11, Extras (APR 1984).

(iv) 52.232-25, Prompt Payment (JAN 2017).

(v) 52.232-39, Unenforceability of Unauthorized Obligations (JUN 2013).

(vi) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (DEC 2013).

(vii) 52.233-1, Disputes (MAY 2014).

(viii) 52.244-6, Subcontracts for Commercial Items (JAN 2019).

(ix) 52.253-1, Computer Generated Forms (JAN 1991).

(b) The Contractor shall comply with the following FAR clauses, incorporated by reference, unless the circumstances do not apply:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (OCT 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note)

(Applies to contracts valued at $30,000 or more).

(ii) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JAN 2018) (E.O. 13126). (Applies to contracts for supplies exceeding the micro-purchase threshold).

19 30

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(iii) 52.222-20, Contracts for Materials, Supplies, Articles, and Equipment Exceeding $15,000 (MAY 2014) (41 U.S.C. chapter 65)

(Applies to supply contracts over $15,000 in the United States, Puerto Rico, or the U.S. Virgin Islands).

(iv) 52.222-35, Equal Opportunity for Veterans (OCT 2015) (38 U.S.C. 4212) (Applies to contracts of $150,000 or more).

(v) 52.222-36, Equal Employment for Workers with Disabilities (JUL 2014) (29 U.S.C. 793) (Applies to contracts over $15,000, unless the work is to be performed outside the United States by employees recruited outside the United States). (For purposes of this clause, ``United States'' includes the 50 States, the District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the

U.S. Virgin Islands, and Wake Island.)

(vi) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212) (Applies to contracts of $150,000 or more).

(vii) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67) (Applies to service contracts over $2,500 that are subject to the Service Contract Labor Standards statute and will be performed in the United States, District of Columbia, Puerto

Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, Johnston Island, Wake Island, or the outer

Continental Shelf).

(viii)(A) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O 13627) (Applies to all solicitations and contracts).

(B) Alternate I (MAR 2015) (Applies if the Contracting Officer has filled in the following information with regard to applicable directives or notices: Document title(s), source for obtaining document(s), and contract performance location outside the United States to which the document applies).

(ix)…