SMART-T_MVPS_Condition_A_Spares_SEPA_-_Solicitation.pdf

REQUEST FOR QUOTATION This RFQ is is not a small business set-aside Page Of

(This is NOT an Order)

1. Request No. 2. Date Issued 3. Requisition/Purchase Request No. 4. Cert For Nat Def. Under BDSA Rating

See Schedule Reg. 2 and/or DMS Reg. 1 5A. Issued By 6. Deliver by (Date)

See Schedule

7. Delivery

FOB Other Destination

5B. For Information Call: (Name and telephone no.) (No collect calls)

8. To: Name and Address, Including Zip Code 9. Destination (Consignee and address, including Zip Code)

See Schedule

10. Please Furnish Quotations to the Issuing Office in Block 5A On or Before Close of Business (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please indicate on this form and return it to the address in Block 5B. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services.

Supplies are of domestic origin unless otherwise indicated by quoter. Any interpretations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. Schedule (Include applicable Federal, State, and local taxes)

Item Number (a)

Supplies/Services (b)

Quantity (c)

Unit (d)

Unit Price (e)

Amount (f)

(See Schedule)

12. Discount For Prompt Payment a. 10 Calendar Days b. 20 Calendar Days c. 30 Calendar Days d. Calendar Days % % % Number Percentage

NOTE: Additional provisions and representations are are not attached.

13. Name and Address of Quoter (Street, City, County, State and 14. Signature of Person Authorized to Sign 15. Date of Quotation Zip Code) Quotation

16. Signer

a. Name (Type or Print) b. Telephone

Area Code

c. Title (Type or Print) Number

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 18 (Rev. 8-95) PREVIOUS EDITIONS NOT USABLE 18-118 Prescribed by GSA-FAR (43 CFR) 53.215-1(a)

X

SPRBL1-18-Q-0089 2018SEP11 DOA7

SPRBL1DLA LAND AT ABERDEEN

6565 SURVEILLANCE LOOP, ROOM C1301

APG, MD 21005-1846

MATTHEW B CROUCH (443)861-4530

ZLAB

EMAIL: MATTHEW.CROUCH@DLA.MIL

X

2018SEP13

1 9

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: MATTHEW B CROUCH

Buyer Office Symbol/Telephone Number: ZLAB/(443)861-4530

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

Part I INSTRUCTIONS FOR SUPPLIERS AND EVALUATIONS OF OFFERS

1. This solicitation, called DLA Land at Aberdeens Master Solicitation for Acquisitions Using Simplified Acquisition Procedures (herein referred to as the Aberdeen Master Solicitation), is used by the DLA Land at Aberdeen contracting office to issue requests for quotations (RFQ) and awards of purchase orders for acquisitions up to the simplified acquisition threshold (SAT). The Aberdeen Master

Solicitation is attached to the RFQ and is referenced in section J. Suppliers are required to read this Aberdeen Master Solicitation and all applicable documents and comply with terms and conditions established. Updated Aberdeen Master Solicitations will be identified by a date and revision number.

2. The Aberdeen Master Solicitation contains multiple parts. Part I instructs suppliers in the submission of quotations and award evaluation. Part II contains the mandatory provisions and clauses, conditional provisions and clauses, and procurement notes that apply to the RFQs and purchase orders. Provisions, clauses, and procurement notes are incorporated by reference. They have the same force and effect as the full text.

NOTE: In some cases, clauses incorporated in Part II will appear in solicitation and award documents. When a conflict arises, the provisions and clauses in the main solicitation or award document will take precedence over the version listed in Part II of the

Aberdeen Master Solicitation.

3. Instructions for Offerors

a) SUBMITTING QUOTATIONS: Contractor shall submit the solicitation document through the Government Point of Entry (www.fbo.gov) or electronically to the point of contact (POC) identified on the solicitation document. Quotes via any other method will not be considered for award.

b) RETURN DATE AND TIME: The time for receipt of quotations will be on the solicitation and the Government Point of Entry. In case of a conflict, the later of the two times will be used.

c) LATE QUOTATIONS: Quotations received after the return date/time for automated solicitations may be considered until the evaluation process begins. Once the evaluation process begins, late quotations will only be considered if the contracting officer determines that considering the late quotation is in the best interest of the Government and would not unduly delay the award.

d) QUOTATION REVISIONS: Suppliers may revise quotations up until the time the solicitation is awarded by contracting the point of contact on the solicitation document.

e) QUOTATION WITHDRAWAL: Suppliers may withdraw quotations until the time the solicitation is awarded by contacting the point of contact on the solicitation document.

(f) SET-ASIDE SOLICITATIONS: Solicitations with an estimated dollar value between the micro-purchase threshold and the SAT are set-aside for small business when cited in the solicitation. When a solicitation is set-aside, only small business quotations that comply with the nonmanufacturer rule will be considered. See FAR 19.502-2(c) for an explanation.

(g) SOLICITATIONS WITH FAT OR PRODUCTION LOT TESTING REQUIREMENTS: This procurement is limited to consideration of quotes for items produced by sources that are currently eligible for waiver of first article testing requirements.

If the successful awardee offered an item produced by a source waived from first article testing, the item supplied shall be of the same design and manufactured by the same method at the same facilities as the item previously approved.

At the Governments discretion, offers for items produced by sources other than those identified above may be considered for award, if supporting documentation is provided with the offer: 1) Contract Numbers, Dates, and Issuing Government Agency or Agencies,2) Item previously furnished, identified by part number, type, model number, etc. 3) Engineering control document/change number of item previously furnished, 4) There have been no changes to manufacturing processes, tooling, or locations.

h) QUANTITY REQUIREMENTS: Quotation must be submitted on the total quantity of each item.

2 9

SPRBL1-18-Q-0089

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

i) DELIVERY REQUIREMENTS: The Government required delivery will be stated in days after date of order (ADO). If the supplier is not able to meet the delivery requirement, the supplier must submit their delivery timeframe on the solicitation document in section B in number of days ADO. This includes time to deliver production quantity, required testing, and government inspection and acceptance. If a FAT is required, the supplier must also comply with the FAT delivery requirement and if unable to comply, must submit their delivery timeframe on quote page in number of days ADO. This includes time to deliver the completed test report (if contractor FAT).

j) SURPLUS: Surplus offers will not be considered.

k) Questions regarding the solicitation should be referred to the POC on the solicitation document or the POC identified in the

Government Point of Entry.

4. Evaluation of Quotations

a) Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the

Government. Past performance, offered delivery, and price will be evaluated when making a comparative assessment of quotes. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s).

b) ALTERNATE OFFERS: Alternate offers will not be considered for award. Alternate offers may be submitted to the POC identified in the solicitation for evaluation for future procurements.

c) NOTICE OF AWARD: Purchase orders are based on a submitted quotation. Suppliers are requested to notify the administrative contracting officer, within 14 days after receiving the notice of award, when they will not perform in accordance with a purchase order. Failure to provide prompt notice will adversely affect your past performance evaluation if the purchase order is later cancelled at other than the

Governments request.

Part II PROVISIONS, CLAUSES, AND PROCUREMENT NOTES

The following websites are provided to suppliers to obtain the full text of the FAR, DFARS, and DLAD provisions, clauses, and

Procurement Notes listed below: https://www.acquisition.gov, http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html,http://www.dla.mil/hq/acquisition/offers/DLAD.aspx and http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.

All provisions, clauses, and procurement notes are incorporated herein by reference with the same force and effect as if set forth in full text, and made a part of the solicitation/order as applicable. The submission of a quotation in response to a RFQ that references this document constitutes the suppliers compliance with the representations and certifications and acceptance of the individual clauses,provisions, and procurement notes incorporated by reference herein. Certain representations and certifications may be required as part of a quotation. Please complete these representations and certifications in the solicitation document. Please review additional representations and certifications within the System for Award Management. Suppliers are reminded that all provisions incorporated herein by reference remain binding in their entirety. Any penalties for misrepresentation contained in the reference clauses and provisions apply.

SUBPART A Mandatory FAR, DFARS, and DLAD Provisions and Clauses

Please refer to Part II, Subpart A of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. Suppliers shall comply with the DLA Master Solicitation for Automated

Simplified Acquisitions in effect at the time of award.

SUBPART B Conditional FAR, DFARS, and DLAD Provisions and Clauses

Please refer to Part II, Subpart B of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of conditional

FAR, DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. Suppliers shall comply with the DLA Master Solicitation for Automated

Simplified Acquisitions in effect at the time of award.

SUBPART C Procurement Notes

Please refer to Part II, Subpart C of the DLA Master Solicitation for Automated Simplified Acquisitions for a listing of mandatory FAR, DFARS, and DLAD Provisions and Clauses. The DLA Master Solicitation for Automated Simplified Acquisitions may be found at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. Suppliers shall comply with the DLA Master Solicitation for Automated

Simplified Acquisitions in effect at the time of award.

3 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

*** END OF NARRATIVE A0001 ***

This Request for Quote (RFQ) is for communications equipment, cryptologic equipment.

1. Offerors are to submit quotes for the following:

NOUN: Cryptographic Recovery Key (CRK)

NSN: 5810-01-606-1096

QTY: 475 each

Part #: 0N678524

Manufacturer: Raytheon Company

CAGEs: 49956

2. The resultant Purchase Order will be issued FOB Destination, with Inspection and Acceptance at Origin for stock replenishment only.

3. Accelerated delivery at no additional cost to the Government is accepted and encouraged.

4. The SHIP TO address for the duration of the resultant contract will be:

(W25G1U)

SU W1BG DLA Distribution

DDSP New Cumberland Facility

2001 Normandy Drive, Door 113 To 134

New Cumberland, PA 17070-5002

6. Prospective offerors should insert a Firm-Fixed Price for the item number, complete any and all requirements within the RFQ, sign, and upload all pages (prior to the closing date) into the Federal Business Opportunities website.

L&M Proc Note 252-3 DLAD Procurement Notes Incorporated By Reference

(Nov 2016)

L&M Proc Note 252-3 DLAD Procurement Notes Incorporated By Reference (Nov 2016)

This solicitation incorporates one or more DLAD Procurement Notes by reference, with the same force and effect as if they were given in full text. The full text of a DLAD Procurement Note may be accessed electronically at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx and via 'References' on the DIBBS homepage.

*** END OF NARRATIVE A0002 ***

4 9

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SUPPLIES OR SERVICES AND PRICES/COSTS

0001 PRODUCTION QUANTITY $ $ ___________________ ______________ __________________

NSN: 5810-01-606-1096

COMMODITY NAME: CRYPTOGRAPHIC RECOVERY KEY

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 49956

Mfr Part Number: 0N678524

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

ASTM D3651-15

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

DOC SUPPL

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

FOB POINT: Destination

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

5 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

INSPECTION AND ACCEPTANCE

E06: Inspection and Acceptance at Origin (SEP 2016)

The contractor shall indicate the location where supplies will be inspected:

Commercial and Government Entity (CAGE) code:____________ ____________

Address:________________________________________

Applicable to contract line-item numbers(s) (CLIN(s)):____0001______ ____

The contractor shall indicate the location where packaging will be inspected:

( ) Same as for supplies OR

CAGE code: __________________________________________________________________

Address: _____________________________________________________________________

Applicable to CLIN(s): __________________________________________________________

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

The inspection location for supplies is the awardees CAGE CODE address unless otherwise indicated in the contract/purchase order.

Inspection will be conducted by the Governments Quality Assurance Representative (QAR). Inspection of packaging, if required, may be conducted at the packaging location cited in the award.

SECTION I (All Awards)

a. Objective evidence of conformance with all contract quality assurance requirements must be present at the inspection location. When requested, manufacturer drawings and technical information and complete records of all inspection work performed to verify that the supplies meet technical requirements shall be provided. If required to determine conformity with contract requirements, subcontractor records shall also be provided.

b. Objective evidence to establish the location of the actual manufacturing source may also requested to confirm the end product country of origin and/or business size of the manufacturer.

c. If the supplier is not the manufacturer of the supplies, objective evidence must be furnished to establish the supplies were produced by an approved manufacturer o approved source.

d. The QAR is required to notify the Post Award Administrator (PCO), if at time of Government Source Inspection (GSI), the QAR is denied access to the offerors facility. If supplies being provided are described only by manufacturers name/CAGE Code and part number, objective evidence must be furnished to establish that the supplies were manufactured under the direction of or under agreement with the

CAGE Code of the part number offered.

e. The QAR may require additional examinations and tests to determine:

i. Completeness of item

ii. Material is new and unused

iii. Absence of rust

iv. Contamination, or deterioration

v. Correct identification/item marking 824 vi. Correct packaging

vii. Absence of any damage

viii. Compliance with preparation for delivery

(End of TQ Requirement)

*** END OF NARRATIVE E0001 ***

DELIVERIES OR PERFORMANCE

L&M Proc Note 211-9049 TIME OF DELIVERY INCREMENTAL DELIVERY (JUNE 2015)___________________________________________________________________________

UCF SECTION F

a) Offers in response to this solicitation will be evaluated as specified in the solicitation. Delivery shall be offered in terms of a number of days after date of award. The number of delivery days required in this solicitation is calculated based on the Governments planned need and customer requirements. Unless delivery is identified elsewhere in the solicitation as an evaluation factor, Offerors are encouraged to conform their delivery terms as closely as possible to the delivery days required, and there will be no evaluation preference, or penalty for faster delivery. Offering a greater number of delivery days than the required delivery schedule may result in the offer not being considered; however, the Government reserves the right to consider offered delivery times that exceed the number of delivery days required by the Government. Delivery is required by the Government in accordance with the following schedule:

Required delivery schedule

6 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Item number Initial Quantity Within days after date of contract

Item number Quantity Within number days after date of award

CLIN 0001 475 60

(Any balance shall be delivered at the rate of [Same rate as above, for each NSN] every [30] days thereafter.)

The Government may elect to consider for award only those offers that comply with the required delivery schedule but reserves the right to consider offered delivery times that exceed the number of delivery days required by the government. The offeror may propose an alternative delivery schedule below. If the Offeror proposes no other delivery schedule, the required delivery schedule above will apply.

Offeror's Proposed Delivery Schedule

Item Number Quantity Within Number Days After Date Of Award

Item number Quantity Within number days after date of award

CLIN 0001 475 ____

(Any balance shall be delivered at the rate of [same as above, for each NSN] every [30] days thereafter.) _____________________________ ____

(b) The Government will mail, or otherwise furnish to, the Offeror an award or notice of award not later than the day the award is dated. Therefore, the Offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the award or notice of award by adding five calendar days for delivery of the award through the ordinary mails, or one working day if the solicitation states that the award or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.)

(End of Text)

*** END OF NARRATIVE F0001 ***

7 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT CLAUSES

The following clauses may apply as prescribed. Applicable clause version is the current version at time of award:

FAR 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions

FAR 52.203-12 Limitation on Payments to Influence Certain Federal Transactions

DFARS 252.209-7004 Subcontracting with Firms that are owned or controlled by the government of a Terrorist country

FAR 52.222-35 Equal Opportunity for Veterans

FAR 52.222-37 Employment Reports on Veterans

FAR 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items

DFARS 252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism

*** END OF NARRATIVE I0001 ***

8 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Attachment 0001 DLAD PRCUREMENT NOTES 22-JUN-2018 044 DATA

Attachment 0002 DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS 03-MAY-2018 041 DATA

Attachment 0003 SEPA CLAUSES 22-MAY-2018 001 DATA

9 9