A19_-_SPRBL1-17-Q-0007.pdf

REQUEST FOR QUOTATION This RFQ is is not a small business set-aside Page Of

(This is NOT an Order)

1. Request No. 2. Date Issued 3. Requisition/Purchase Request No. 4. Cert For Nat Def. Under BDSA Rating

See Schedule Reg. 2 and/or DMS Reg. 1 5A. Issued By 6. Deliver by (Date)

See Schedule

7. Delivery

FOB Other Destination

5B. For Information Call: (Name and telephone no.) (No collect calls)

8. To: Name and Address, Including Zip Code 9. Destination (Consignee and address, including Zip Code)

See Schedule

10. Please Furnish Quotations to the Issuing Office in Block 5A On or Before Close of Business (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please indicate on this form and return it to the address in Block 5B. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services.

Supplies are of domestic origin unless otherwise indicated by quoter. Any interpretations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. Schedule (Include applicable Federal, State, and local taxes)

Item Number (a)

Supplies/Services (b)

Quantity (c)

Unit (d)

Unit Price (e)

Amount (f)

(See Schedule)

12. Discount For Prompt Payment a. 10 Calendar Days b. 20 Calendar Days c. 30 Calendar Days d. Calendar Days % % % Number Percentage

NOTE: Additional provisions and representations are are not attached.

13. Name and Address of Quoter (Street, City, County, State and 14. Signature of Person Authorized to Sign 15. Date of Quotation Zip Code) Quotation

16. Signer

a. Name (Type or Print) b. Telephone

Area Code

c. Title (Type or Print) Number

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 18 (Rev. 8-95) PREVIOUS EDITIONS NOT USABLE 18-118 Prescribed by GSA-FAR (43 CFR) 53.215-1(a)

X

SPRBL1-17-Q-0007 DOA7

SPRBL1DLA LAND AT ABERDEEN

6001 COMBAT DRIVE ROOM C1-301

APG, MD 21005-1846

JASANYA BIAS HARRISON (443)861-4539

DLA-ZLAA

EMAIL: JASANYA.BIASHARRISON@DLA.MIL

X

2017JUL07

1 39

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: JASANYA BIAS HARRISON

Buyer Office Symbol/Telephone Number: DLA-ZLAA/(443)861-4539

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

1. This request for quotation (RFQ) will result in a Firm-Fixed Price, one-time purchase using simplified acquisition procedures for one component of the ON-505 Switch Multiplexer Unit (SMU). The item for procurement is a Circuit Card Assembly (CCA) manufactured by General

Dynamics Mission Systems (CAGE 67032) as follows:

NSN NUMBER: 5998-01-480-3175

PART NUMBER: 06-2786595-100 (CAGE 67032)

Nomenclature: Circuit Card Assembly

Quantity: 16 Each

2. Accelerated delivery at no additional cost to the government is accepted and encouraged.

3. The contractor shall provide a warranty at no additional cost to the government in accordance with FAR 52.213-4, Terms and Conditions

Simplified Acquisitions (Other Than Commercial Items).

4. Quotations shall be submitted and evaluated using simplified acquisition procedures.

5. The maximum value of any contract awarded as a result of this solicitation will be $150,000.00

*** END OF NARRATIVE A0001 ***

2 39

SPRBL1-17-Q-0007

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SUPPLIES OR SERVICES AND PRICES/COSTS

0001 Production Quantity 16 EA $ $ ___________________ ______________ __________________

NSN: 5998-01-480-3175

COMMODITY NAME: CIRCUIT CARD ASSEMBLY

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 67032

Mfr Part Number: 06-2786595-100

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-2073 SPI AG00000601

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Military

LEVEL PACKING: Minimal

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

DOC SUPPL

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

DEL REL CD QUANTITY DAYS AFTER AWARD __________ ______________ ________________

001 16 0270

FOB POINT: Destination

SHIP TO:

(W25G1U) SU W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND,PA,17070-5002

3 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

PACKAGING AND MARKING

52.211-9036 Physical Identification/Bare Item Marking.

As prescribed in 11.204-99, insert the following clause:

PHYSICAL ITEM IDENTIFICATION/BARE ITEM MARKING DLA LAND AND MARITIME (NOV 2011)

Unless authorized by exclusions listed below, all items shall be marked as specified in military standard (MIL-STD) 130N. The following

DLA Land and Maritime supplemental marking requirements shall take precedence in case of conflict with MIL-STD-130N.

DLA Land and Maritime Exclusion:

(a) Unless the design control document specifically cites other marking requirements, the item will be considered too small to mark under the conditions listed below (however, 52.211-9035, Marking Requirements, applies):

(1) For federal supply classes (FSCs) 5905, 5910, 5935, 5961, 5962, and 5999, items smaller than .100 inch in diameter and .250 inch in length or .100-inch square X .250 inch in length, exclusive of wire leads, will not be marked.

(2) Other FSCs managed by DLA Land and Maritime will not be marked if the item is smaller than .250 inch in diameter X .500-inch-long or

.250-inch square X .500-inch-long, exclusive of wire leads.

(3) Restrictions (1) and (2) above will not preclude marking of items of smaller dimensions if it is the manufacturers or vendor's standard practice to do so.

(b) No other physical item marking exclusions are authorized unless specified by MIL-STD-130N.

(End of Clause)

*** END OF NARRATIVE D0001 ***

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

(1)Additional Packaging and Marking Requirements:

(a)Prohibited cushioning and wrapping materials: Use of asbestos, excelsior, newspaper, shredded paper (all types, including wax paper and computer paper), and similar hygroscopic or non-neutral materials and all types of loose-fill materials, including polystyrene, is prohibited for application such as cushioning, fill, stuffing, and dunnage. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material.

(b)MIL-STD-129 establishes requirements for contractors that ship packaged materiel to the Government to provide both linear bar codes and two-dimensional (2D) symbols on shipping labels. Shipping labels with 2D symbols are referred to as Military Shipping Labels (MSL) and are required on all CONUS and OCONUS shipments with the following exceptions:

(1)Subsistence items procured through full-line food distributors (prime contractors), market ready type items shipped within the

Continental United States (CONUS) to customers within CONUS;

(2)Any item for which ownership remains with the contractor until the item is placed in designated locations at the customer location prior to issuance to the customer. Government control begins upon placement of the item by the contractor into the designated location or issuance from the designated location by contractor personnel (i.e., the contractor is required to stock bins at the customer location and/or issue parts from a contractor controlled parts room).

(3)Bulk petroleum, oil and lubricant products delivered by pipeline; or tank car, tanker and tank trailer for which the container has a capacity greater than 450 L (119 gallons) as a receptacle for a liquid; a maximum net mass greater than 400 kg (882 pounds) and a capacity greater than 450139 L (119 gallons) as a receptacle for a solid; or a water capacity greater than 454 kg (1000140 pounds) as a receptacle for a gas.

(4)Medical items procured through Customer Direct suppliers or prime contractors that do not enter the Defense Transportation System.

(5)Delivery orders when the basic contract has not been modified to require MIL-STD-129.

(c)MIL-STD-129 provides numerous illustrations of what should be bar-coded and the recommended placement of the bar code. Further information is available on the DLA Packaging Web Site at:

http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging.aspx .

(2)Requirements for Treatment of Wood Packaging Material (WPM)

(a)Assets packed in or on wood pallets, skids, load boards, pallet collars, wood boxes, reels, dunnage, crates, frames, and cleats must comply with the Heat Treatment (HT) or Heat Treatment/Kiln Dried (HT/KD) (continuous at 56 degrees Centigrade for 30 minutes) standard in 3/14/2017 6 DoD Manual 4140.65-M "Compliance for Defense Packaging: Phytosanitary Requirements for Wood Packaging Material (WPM)".

WPM must be stamped or branded with the appropriate certification markings as detailed in DOD 4140.65-M and be certified by an

4 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

accredited American Lumber Standards Committee (ALSC)-recognized agency. The WPM certification markings must be easily visible, especially in pallet loads, to inspectors.

(3)Palletization shall be in accordance with MD00100452, REVISION C, DATED 09/2016 found at:

http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Palletization.aspx

(End of TQ Requirement)

*** END OF NARRATIVE D0002 ***

SHIPPING LABEL REQUIREMENTS MILITARY STANDARD (MIL-STD) 129P

(a) MIL-STD-129, revision P, current version, establishes requirements for Contractors that ship packaged materiel to the Government to provide both linear bar codes and two-dimensional (2D) symbols on shipping labels (but see paragraph (d) for exceptions to the requirement for 2D symbols). Shipping labels with 2D symbols are referred to as military shipping labels (MSL). See the Defense

Logistics Agency (DLA) packaging web site identified in paragraph (e) for change notices to MIL-STD-129P that apply. Linear (code 3 of 9 or code 39) bar codes continue to be required on interior packages (unit packs and intermediate packages) for the national stock number

(NSN) and, when applicable, the serial number(s); and on exterior shipping containers and palletized unit loads for the NSN, commercial and Government entity (CAGE) code, contract number and, when applicable, the serial number(s). This data is also required to be linear bar-coded on the Department of Defense (DD) form 250.

(b) The shipping label described in this clause replaces former DD form 1387 and is illustrated in Figures 2a and 2b of MIL-STD-129P.

(1) The shipping label requires code 3 of 9 or code 39 linear bar codes for the transportation control number (TCN), piece number and

DOD activity address code (DoDAAC) for the ultimate consignee or mark-for address.

(2) The 2D symbol on the shipping label must contain the document (requisition) number, NSN, originating activitys routing identifier code (RIC), unit of issue, quantity, condition code, and unit price, which are ordinarily included on the DD Form 250. A complete list of data elements is defined in table IV of MIL-STD-129P. The TCN should be part of the mark-for information on the contract. This mark-for should be directly below the ship-to address in the contract. All TCNs must be unique, and each part of a shipment (partial shipment of one or more pieces) loaded on a different conveyance requires a unique TCN. Samples of TCN construction may be found at the DLA web site identified in paragraph (e) of this clause. (A general construction of a TCN is provided below.) Except for the TCN, which must always be present on the shipping label, when the contract omits any other data elements as defined in table IV of MIL-STD-129P and if the information is not available from the administrative contracting officer, then the field is not required as part of the shipping label and may be left blank.

TCN positions 1-14 requisition/document number

TCN position 15 Enter the suffix code; if none, enter X

TCN position 16 Enter X if not a partial shipment; if a partial shipment, enter A for first shipment, B for second shipment, etc. (see paragraph L., Appendix L, Part II of the Defense Transportation Regulation (DTR), DOD 4500.9-R)

TCN Position 17 Enter X

(c) The following must comply with the requirements in table IV of MIL-STD-129P and include all applicable data elements identified in the table.

(1) All diverted or redirected outside the contiguous United States (OCONUS) direct vendor delivery (DVD) and prime vendor shipments which pass through the Defense Transportation System (DTS) via Defense Distribution depot consolidation points (see below), aerial ports of embarkation, pre-positioned ship operations sites, or the Norfolk, Virginia container freight station.

Container Consolidation PointDODAACDefense Depot San Joaquin California (DDJC)(CCP WHSE 30)W62N2A and SW3225Defense Depot Susquehanna

Pennsylvania (DDSP)(CCP Door 135-168)W25N14 and SW3123(2) Shipments for depot storage with destinations to the following OCONUS

(overseas) locations:

Depot Storage SiteDODAACDefense Depot Pearl Harbor Hawaii (DDPH)SW3144Defense Depot Yokosuka Japan (DDYJ)SW3142Defense Depot Germersheim

Germany (DDDE)SWE300Defense Depot Sasebo Japan (DDYJ)SW3143Defense Depot Sigonella Italy (DDSI)SW3170Defense Depot Guam

(DDPH)SW3147Defense Depot Korea (DDDK)SW3105(3) Direct vendor delivery (DVD) shipments. The following additional guidance applies when ______________________________________ bar coding DVD shipments:

(i) In addition to other marking requirements in the contract, the following separate lines of bar coded data, with human readable interpretation (HRI) printed clearly below the element, shall be provided. No spaces shall separate the individual data elements within each line.

(A) Document number and suffix. The document number consists of a 14-character (15 characters when a suffix is included) alpha-numeric code. It may be listed on a contract/award as the requisition number, transportation control number (TCN), etc. If there is no TCN, use the requisition number followed by XXX.

(B) National stock number (NSN). The NSN will appear as a 13-digit code without the dashes. If there is no NSN, use the CAGE and part number.

(C) ICP routing identifier code (RIC). The RIC for each procuring activity is as follows:

S9C DLA Land and Maritime - construction

S9E DLA Land and Maritime electronics

S9F DLA Energy missiles

5 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

S9G DLA Aviation

S9I DLA Troop Support - general and industrial

S9T DLA Troop Support - clothing and textiles

S9M DLA Troop Support - medical materiel

\~ \~ (D) Unit of issue. The appropriate unit of issue (U/I) will appear as a two-digit alpha character.

(E) Quantity. The quantity will appear as a five-position number, including zero fillers on the left.

(F) The above will be followed by an A and eight zeros (specifically, A00000000).

(ii) These bar code markings shall be placed on labels affixed to either to DD Form 250 or the commercial packing list. If used on the

DD Form 250, it should be in blocks 15, 16, 17, etcetera. In either case, these documents shall be furnished in packing list envelopes affixed to the outside of the shipping container.

(iii) The bar code symbology shall be code 3 of 9 (code 39) in accordance with the International Organization for Standardization (ISO)/ the International Electrotechnical Commission (IEC)-16388.

(d) Listed below are exceptions to requirements in Table IV of MIL-STD-129P. These shipments/orders require only a DD form 250 or commercial invoice and a shipping label, with the document number (except for shipments described in subparagraph (d)(5)); NSN; RIC;

unit of issue; quantity; condition code; and unit price. This data must be code 3 of 9 (code 39) bar code symbology in accordance with

ISO/IEC-16388. (Although not mandatory, a military shipping label in accordance with MIL-STD-129P is acceptable for depot shipments.)

(1) Subsistence items procured through full-line food distributors (prime vendors), market ready type items such as fresh milk, ice cream, and other fresh dairy products, fresh bread and other fresh bakery products, and all fresh fruits and vegetables, shipped within the contiguous United States (CONUS) to customers within CONUS.

(2) Any item for which ownership remains with the vendor until the item is placed in designated locations at the customer location prior to issuance to the customer. Government control begins upon placement of the item by the vendor into the designated location or issuance from the designated location by vendor personnel (that is, the vendor is required to stock bins at the customer location and/or issue parts from a vendor controlled parts room).

(3) Bulk purchases of petroleum, oil and lubricant products delivered by (A) pipeline; or (B) tank car, tanker and tank trailer for which the container has (1) a capacity greater than 450 liter (119 gallons) as a receptacle for a liquid; (2) a maximum net mass greater _ _ than 400 kilogram (882 pounds) and a capacity greater than 450 liter (119 gallons) as a receptacle for a solid; or (3) a water capacity _ greater than 454 kilogram (1000 pounds) as a receptacle for a gas.

(4) Medical items procured through DVD suppliers or prime vendors that ship directly to the end customer, such as medical treatment facilities, hospitals, or clinics, and do not pass through the Defense Transportation System.

(5) CONUS-originated shipments for depot storage with destinations to the following:

Depot Storage SiteDoDAACDefense Depot Susquehanna Pennsylvania (DDSP)W25G1U and SW3124Defense Depot San Joaquin California (DDJC)W62G2T and SW3224Defense Depot Norfolk Virginia (DDNV)SW3117Defense Depot San Diego California (DDDC)SW3218Defense Depot Jacksonville Florida

(DDJF)SW3122Defense Depot Puget Washington (DDPW)SW3216Defense Depot Cherry Point North Carolina (DDCN)SW3113Defense Depot Richmond

Virginia (DDRV)SW0400Defense Depot Red River Texas (DDRT)W45G19 and SW3227Defense Depot Corpus Christi Texas (DDCT)W45H08 and

SW3222Defense Depot Tobyhanna Pennsylvania (DDTP)W25G1W and SW3114Defense Depot Anniston Alabama (DDAA)W31G1Z and SW3120Defense Depot

Hill Utah (DDHU)SW3210Defense Depot Oklahoma City Oklahoma (DDOO)SW3211Defense Depot Warner Robins Georgia (DDWG)SW3119Defense Depot

Barstow California (DDBC)SW3215Defense Depot Albany Georgia (DDAG)SW3121(6) Delivery orders when the basic contract has not been modified to require MIL-STD-129P.

(e) MIL-STD-129P provides numerous illustrations of what should be bar-coded and the recommended placement of the bar code. Further information is available on the DLA packaging web site. In addition, DLAs distribution and planning and management system (DPMS) is a web-based system capable of providing shipping instructions and military shipping labels. Users must first register at DLA Distributions website. Click ok then create account to get access to use the DPMS production site. DPMS training is available. Click vendor application, then users guide.

(f) A copy of ISO/IEC-16388 is available from:

The American National Standards Institute

25 West 43rd Street, New York, NY 10036 or through http://www.ansi.org/ or http://www.iso.org/iso/home.html.

(End of Clause)

*** END OF NARRATIVE D0003 ***

INSPECTION AND ACCEPTANCE

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

1 52.246-1 CONTRACTOR INSPECTION REQUIREMENTS APR/1984

2 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE AUG/1996

E06 Inspection and Acceptance at Origin (SEP 2016)

The contractor shall indicate the location where supplies will be inspected:

6 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Commercial and Government Entity (CAGE) code: ___________________________________

Address: _____________________________________________________________________

Applicable to contract line-item numbers(s) (CLIN(s)):________________________________

The contractor shall indicate the location where packaging will be inspected:

( ) Same as for supplies OR

CAGE code: __________________________________________________________________

Address: _____________________________________________________________________

Applicable to CLIN(s): ___________________________________________________________

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

1. The Governments Quality Assurance Representative (QAR) will inspect supplies described by manufacturer's name/code and part number at origin location(s):

a. The QAR may require that objective evidence be furnished establishing the name and address of the plant that manufactures the supplies to ensure that a domestic product is being supplied.

b. Objective evidence of performance must be present for all quality assurance requirements specified in the contract. The QAR may require additional examinations and tests to determine:

i. Completeness of item

ii. Material is new and unused

iii. Absence of rust

iv. Contamination, or deterioration

v. Correct identification/item marking

vi. Correct packaging

vii. Absence of any damage

viii. Compliance with preparation for delivery

2. If the supplier is not the manufacturer of the supplies, objective evidence must be furnished to establish that the supplies were produced by the approved manufacturer.

3. For supplies designated as former Government surplus (whether described by manufacturers name/code and part number, or by Military or

Federal specification or drawing), the original package markings of each item shall be verified to previous Government contract number and part number. Any deviation shall be cause for rejection of the item. The Procuring Activity may add additional inspection requirements based on the evaluation of the surplus offer. Such additional requirements will be identified before the award.

(End of TQ Requirement)

*** END OF NARRATIVE E0001 ***

DELIVERIES OR PERFORMANCE

3 52.242-15 STOP-WORK ORDER AUG/1989

4 52.242-17 GOVERNMENT DELAY OF WORK APR/1984

5 52.247-48 F.O.B. DESTINATION--EVIDENCE OF SHIPMENT FEB/1999

6 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION MAR/2016

(a) Definitions. As used in this clause--

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a

7 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards

Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Governments unit acquisition cost" means

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the

Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the

Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or

8 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

None_____

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

None_____

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number None. ____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number None. ____

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC

International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI

MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International

Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2

Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air

Transport Association Common Support Data Dictionary; and

9 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer

Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of

U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of

MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and

Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material

Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Governments unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

10 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material

Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at

252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number -7-, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by contract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

7 252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION JUN/2016

(a) Definitions. As used in this clause--

"Advance shipment notice" means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency dentification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.

"Bulk commodities" means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled

11 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

conveyances, or pipelines:

(1) Sand.

(2) Gravel.

(3) Bulk liquids (water, chemicals, or petroleum products).

(4) Ready-mix concrete or similar construction materials.

(5) Coal or combustibles such as firewood.

(6) Agricultural products such as seeds, grains, or animal feed.

"Case" means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container.

"Electronic Product Code\TM\ (EPC)" means an identification scheme for universally identifying physical objects via RFID tags and other means. The standardized EPC\TM\ data consists of an EPC\TM\ (or EPC\TM\ identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC\TM\ tags. In addition to this standardized data, certain classes of EPC\TM\ tags will allow user-defined data. The EPC\TM\ Tag Data Standards will define the length and position of this data, without defining its content.

"EPCglobal" means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology.

"Exterior container" means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

"Palletized unit load" means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the

Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

"Passive RFID tag" means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive

RFID tags that meet the EPCglobal\TM\ Class 1 Generation 2 standard.

"Radio frequency identification (RFID)" means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

"Shipping container" means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that--

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I--Packaged operational rations.

(B) Class II--Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(C) Class IIIP--Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives.

(D) Class IV--Construction and barrier materials.

(E) Class VI--Personal demand items (non-military sales items).

(F) Subclass of Class VIII--Medical materials (excluding pharmaceuticals, biologicals, and reagents--suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX--Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

12 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/sci/RFID_ship-to-locations.html or to--

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to--

(B) The following location(s) deemed necessary by the requiring activity:

Contract line, subline, or exhibit Location name City State DoDAAC line item number

None ____

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast

Payment Procedures.

(c) The Contractor shall--

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more

RFID tags) and conforms to the requirements in paragraph (d) of this clause;

(2) Use passive tags that are readable; and

(3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-

129 (Section 4.9.2) tag placement specifications.

(d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC\TM\ Tag Data

Standards in effect at the time of contract award. The EPC\TM\ Tag Data Standards are available at http://www.epcglobalinc.org/standards/.

(1) If the Contractor is an EPCglobal\TM\ subscriber and possesses a unique EPC\TM\ company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC\TM\ Tag Data Standards document to encode tags.

(2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government

Entity (CAGE) code and shall encode the tags in accordance with the tag identifier details located at http://www.acq.osd.mil/log/sci/ait.html. If the Contractor uses a third-party packaging house to encode its tags, the CAGE code of the third-party packaging house is acceptable.

(3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFID tag is globally unique, per the requirements in paragraph (c)(1) of this clause.

(e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic

Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph (d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/.

(End of clause)

TIME OF DELIVERY

(a) Offers in response to this solicitation will be evaluated as specified in the solicitation. Delivery shall be offered in terms of a number of days after date of delivery order. The number of delivery days required in this solicitation is calculated based on the

Governments planned need and customer requirements.

GOVERNMENT REQUIRED DELIVERY SCHEDULE

The Government requires delivery to be made according to the following schedule:

13 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

NSN 5998-01-480-3175 16 Each 270 Days After Date of Delivery Order

(b) The Offeror may propose an alternative delivery schedule below. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply. The Government reserves the right to award either under the required delivery schedule or under the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above.

OFFERORS PROPOSED DELIVERY SCHEDULE

NSN 5998-01-480-3175 _____ Each ______ Days After Date of Delivery Order

*** END OF NARRATIVE F0001 ***

14 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT ADMINISTRATION DATA

8 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS MAY/2013

(a) Definitions. As used in this clause--

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this

Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the

WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer

Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Invoice and Receiving Report (Combo)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

Inspection: Source

Acceptance: Source

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC To be determined upon award

Issue By DoDAAC SPRBL1

Admin DoDAAC To be determined upon award

Inspect By DoDAAC

Ship To Code

Hardware Deliverables W25G1U

Data Deliverables N/A

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

15 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email

Notifications" field of WAWF once a document is submitted in the system.

jasanya.biasharrison@dla.mil

(g) WAWF point of contact:

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

DCMA office to be specified at time of award.

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

16 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SPECIAL CONTRACT REQUIREMENTS

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

The Contractor shall remove or obliterate from a rejected end item and its packing and packaging, any marking, symbol, or other representation that the end item or any part of it has been produced or manufactured for the United

States Government. Removal or obliteration shall be accomplished prior to any donation, sale, or disposal in commercial channels.

(End of TQ Requirement)

*** END OF NARRATIVE H0001 ***

CONTRACT CLAUSES

9 52.204-13 SYSTEM FOR AWARD…