Attachment_0002_SM-D-84429_TDPL.pdf
PDF 12 MB Posted
- Attached to
- Fiber Optic Cable Assembly Part # A3302584-5 Federal contract opportunity
- Solicitation number
- SPRBL1-16-Q-0019
About this file
SPRBL1-16-Q-0019 TDPL Packet
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRBL1-16-Q-0019_Amendment_0002.pdf | ||
| SPRBL1-16-Q-0019_Amendment_0001.pdf | ||
| Attachment_0002_TDP_Part___A3302584_80063_DP_0001_H.pdf | ||
| Attachment_0001_Technical_Requirements_1-21-16.pdf | ||
| Attachment_0001_SM-D-84429_Technical_Requirements.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TACOM
file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
TECHNICAL DATA PACKAGE SM-D-84429 80063
TDP DATE 09/03/2015
NOMENCLATURE TELEPHONE CIRCUIT LINE JACK TA-222/PT ASSY
1. MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND OTHER TECHNICAL DATA LISTED IN THIS TDP.
2. THIS TDP IS COMPRISED OF THE FOLLOWING SECTIONS WHICH SHOW PRODUCT STRUCTURE AND LIST THE DRAWINGS AND ASSOCIATED DOCUMENTS (WITH THEIR REVISION AND AMENDMENT LEVELS) REQUIRED TO PRODUCE AND
INSPECT THE MATERIAL BEING PRODUCED.
PRODUCT STRUCTURE
PRODUCT DRAWINGS
QUALITY ASSURANCE DOCUMENTS
APPLICABLE SPECIFICATIONS AND STANDARDS
REPLACED SPECIFICATIONS AND STANDARDS
APPROVED ENGINEERING CHANGES OUTSTANDING
3. THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDP IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE AMENDMENT OR REVISION LEVEL FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE AS SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDP. SUPERSEDED SPECIFICATIONS AND STANDARDS WHICH MAY BE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERSEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDP. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE
PRODUCT STRUCTURE
LEVEL PART NUMBER CAGE NOMENCLATURE QUANTITY NOTE
0 SM-D-84429 80063 TELEPHONE CIRCUIT LINE JACK TA-222/PT ASSY
---1 SM-B-361802 80063 BUSHING,PANEL 1.0 ea ---1 MS35245-24 96906 CANC (USE MS35198) 2.0 ea ---1 SC-B-140983 80063 CAPTIVE SCREW 2.0 ea ---1 SC-B-84438 80063 DESIGNATION STRIP 1.0 ea ---1 SC-B-84432 80063 INSULATOR 1.0 ea ---1 SC-C-84478 80063 JACK ASSY 1.0 ea ------2 SC-B-84481 80063 BUSHING 2.0 ea ------2 SC-B-84484 80063 CLAMP PLATE 1.0 ea ------2 SC-B-84500 80063 CONTACT SPRING ASSY 1.0 ea ---------3 SC-B-84502 80063 BLANK SPRING 1.0 ea ---------3 SC-B-84496 80063 CONTACT 1.0 ea ------2 SC-B-84503 80063 CONTACT SPRING ASSY 1.0 ea ---------3 SC-B-84504 80063 BLANK SPRING 1.0 ea ---------3 SC-B-84492 80063 CONTACT 1.0 ea ------2 SC-B-84493 80063 CONTACT SPRING ASSY 1.0 ea ---------3 SC-B-84495 80063 BLANK SPRING 1.0 ea ---------3 SC-B-84496 80063 CONTACT 1.0 ea ------2 SC-B-84490 80063 CONTACT SPRING ASSY 1.0 ea ---------3 SC-B-84491 80063 BLANK SPRING 1.0 ea ---------3 SC-B-84492 80063 CONTACT 1.0 ea ------2 SC-B-84483 80063 INSULATOR 1.0 ea ------2 SM-B-84480 80063 INSULATOR 1.0 ea ------2 SM-B-84482 80063 INSULATOR 7.0 ea ------2 SC-B-84479 80063 INSULATOR 1.0 ea ------2 SC-B-84509 80063 INSULATOR 2.0 ea ------2 SM-B-84486 80063 JACK FRAME ASSY 1.0 ea ---------3 SM-B-84487 80063 JACK FRAME 1.0 ea ---------3 SC-B-84488 80063 SLEEVE 1.0 ea file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
------2 SM-B-84489 80063 LUG 1.0 ea ------2 SC-B-84505 80063 NUT 1.0 ea ------2 SC-B-84497 80063 SPRING AND SPACER ASSY 1.0 ea ---------3 SM-B-84498 80063 BLANK SPRING 1.0 ea ---------3 SC-B-84499 80063 SPACER 1.0 ea ------2 SC-B-84506 80063 SPRING AND SPACER ASSY 1.0 ea ---------3 SC-B-84507 80063 BLANK SPRING 1.0 ea ---------3 SC-B-84508 80063 SPACER 1.0 ea ------2 SC-B-84485 80063 WASHER 1.0 ea ---1 SM-B-84543 80063 LIGHTNING ARRESTOR ASSY 1.0 ea ------2 SC-B-84545-2 80063 END TERMINAL 1.0 ea ---------3 SC-B-84545 80063 END TERMINAL 0.0 ea ------2 SC-B-84545-1 80063 END TERMINAL 1.0 ea ---------3 SC-B-84545 80063 END TERMINAL 0.0 ea ------2 SC-B-84544 80063 GROUND TERMINAL 1.0 ea ---1 SM-C-119921 80063 LINE CASE ASSY TA-222/PT 1.0 ea ------2 SC-B-84435 80063 BRACKET 1.0 ea ------2 SM-C-119922 80063 CASE 1.0 ea ------2 SM-B-119923 80063 FRONT PANEL 1.0 ea ---1 SC-C-84430 80063 LINE COVER ASSY 1.0 ea ------2 SC-B-84432 80063 INSULATOR 1.0 ea ------2 SC-C-84431 80063 LINE COVER 1.0 ea ---1 SM-D-84439 80063 MAGNETO SIGNAL ASSY 1.0 ea ------2 SC-B-84475 80063 BUSHING 3.0 ea ------2 MS35229-1 96906 CANC (USE MS35214) 2.0 ea ------2 SM-C-84462 80063 COIL ASSY 1.0 ea ---------3 SM-C-957242 80063 REED SWITCH ASSEMBLY 1.0 ea ------------4 SM-B-957240 80063 STOP 1.0 ea ------------4 SM-C-957241 80063 SWITCH,MAGNETIC REED 1.0 ea ---------3 SM-B-84463 80063 SPOOL ASSY 1.0 ea ------------4 SC-B-84470 80063 NUT 1.0 ea ------------4 SM-B-84468 80063 SPOOL HEAD ASSY 1.0 ea ---------------5 SC-B-84467 80063 INSERT 1.0 ea ---------------5 SM-B-84469 80063 TERMINAL 3.0 ea ------------4 SM-C-84464 80063 SPOOL HEAD ASSY 1.0 ea ---------------5 SM-B-107677 80063 BRACKET 1.0 ea ---------------5 SM-B-142205 80063 BRACKET 1.0 ea ---------------5 SC-B-84465 80063 CORE 1.0 ea ---------------5 SC-B-84467 80063 INSERT 1.0 ea ---------------5 SM-B-367460 80063 STOP 1.0 ea ------------4 SM-C-367454 80063 SPOOL WINDING ASSY 1.0 ea ---------------5 SM-B-367456 80063 SPOOL 1.0 ea ------2 SC-B-84445 80063 HOUSING ASSY 1.0 ea ---------3 SC-B-84446 80063 HOUSING FLANGE 1.0 ea ---------3 SC-B-84447 80063 HOUSING SHELL 1.0 ea ---------3 SC-B-84448 80063 RESET BUSHING 1.0 ea ------2 SC-B-84470 80063 NUT 1.0 ea ------2 SC-B-84458 80063 RESET ASSY 1.0 ea ---------3 SC-B-84459 80063 GUIDE 1.0 ea file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
---------3 SC-B-84460 80063 RESET PLUNGER 1.0 ea ---------3 SC-B-84461 80063 RETAINING RING 1.0 ea ------2 SC-B-84457 80063 RESET LEVER 1.0 ea ------2 SC-B-84456 80063 RESET SHAFT 1.0 ea ------2 SC-B-84477 80063 RESET SPRING 1.0 ea ------2 SM-D-84439-1 80063 SILICONE JELLY 0.0 as_needed ------2 SM-B-84450 80063 TARGET ASSY 1.0 ea ---------3 SC-B-84451 80063 MAGNET 1.0 ea ---------3 SC-B-84454 80063 RESET PIN 1.0 ea ---------3 SC-B-84452 80063 TARGET 1.0 ea ---------3 SC-B-84453 80063 TARGET SHAFT 2.0 ea ------2 SC-B-142206 80063 TERMINAL AND CAP ASSY 1.0 ea ---------3 SC-B-84476 80063 GROUND TERMINAL 1.0 ea ---------3 SC-B-84449 80063 HOUSING CAP 1.0 ea ------2 SC-B-84440 80063 WINDOW ASSY 1.0 ea ---------3 SM-B-888119 80063 NUT 1.0 ea ---------3 SC-B-84441 80063 NUT AND RING ASSY 1.0 ea ------------4 SC-B-84442 80063 NUT 1.0 ea ------------4 SC-B-84443 80063 RING 1.0 ea ---------3 SC-B-84444 80063 WINDOW 1.0 ea ---1 MS35649-45 NOT KNOWN NUT, PLAIN, HEXAGON, MACHINE SCREW, UNC-2B 2.0 ea ---1 SC-D-35754 80063 REEL AND PLUG ASSY 1.0 ea ------2 MS35229-5 96906 CANC (USE MS35214) 3.0 ea ------2 MS35239-19 96906 NUT 2.0 ea ------2 MS35649-25 96906 NUT, PLAIN, HEXAGON, MACHINE SCREW, UNC-2B 4.0 ea ------2 SC-B-84518 80063 OUTER SPACER 2.0 ea ------2 SM-B-361801 80063 PLUG-STOP 1.0 ea ------2 SM-D-84511 80063 REEL 1.0 ea ------2 SC-B-84515 80063 RING 2.0 ea ------2 SM-B-84513 80063 SHAFT 1.0 ea ------2 SC-B-84514 80063 SHAFT CAP 1.0 ea ------2 SM-B-142204 80063 SHAFT RING 1.0 ea ------2 SM-B-84519 80063 SPRING ASSY 1.0 ea ---------3 SC-B-84521-2 80063 LUG 1.0 ea ------------4 SC-B-84521 80063 LUG 0.0 ea ---------3 SC-B-84520 80063 SPRING 1.0 ea ------2 SM-B-84523 80063 SPRING ASSY 1.0 ea ---------3 SC-B-84521-3 80063 LUG 1.0 ea ------------4 SC-B-84521 80063 LUG 0.0 ea ---------3 SC-B-84520 80063 SPRING 1.0 ea ------2 SM-B-84522 80063 SPRING ASSY 1.0 ea ---------3 SC-B-84521-1 80063 LUG 1.0 ea ------------4 SC-B-84521 80063 LUG 0.0 ea ---------3 SC-B-84520 80063 SPRING 1.0 ea ------2 SM-D-84512 80063 SPRING CUP 2.0 ea ------2 SC-C-35755 80063 SWITCHBOARD CORD ASSY 1.0 ea ---------3 SC-C-35756 80063 CORD ASSY 1.0 ea ------------4 SC-B-36374 80063 ADAPTER CONNECTOR 1.0 ea ------------4 SC-B-36375 80063 CHUCK INSERT 1.0 ea file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
------------4 SC-B-84531 80063 CLIP 1.0 ea ------------4 SC-B-36377 80063 SLEEVE ASSY 1.0 ea ---------------5 SC-B-36378 80063 SLEEVE INSERT 1.0 ea ------------4 SC-B-36376 80063 SPRING 1.0 ea ------------4 SC-B-35544 80063 TAG 1.0 ea ------------4 SC-B-84527 80063 TERMINAL 6.0 ea ---------3 SC-B-84532 80063 SCREW 1.0 ea ---1 SC-B-140981 80063 REEL SHIELD 1.0 ea ---1 SC-B-84461 80063 RETAINING RING 2.0 ea ---1 SC-B-84541 80063 WASHER 1.0 ea ---1 MS35333-87 96906 WASHER 4.0 ea
CSI - Critical Safety Item
PRODUCT DRAWINGS
DOC
TYPE
DOC
NUMBER REV CAGE EXPORT
CONTROL
DISTRIBUTION
CODE
REVISION
DATE NOTE CONTENT FILES
DP AG00000600 C 80063 A AG00000600_80063__0001_C.C4,AG00000600_80063__0004_C.C4,AG00000600_80063__0003_C.C4,AG00000600_80063__0002_C.C4 DP SC-A-4894 G 80063 A SC-A-4894_80063__0001_G.C4,SC-A-4894_80063__0002_G.C4,SC-A-4894_80063__0003_G.C4
DP SC-A-
107680 A 80063 A SC-A-107680_80063__0001_A.C4
DP SC-B-35544 B 80063 A SC-B-35544_80063__0001_B.C4
DP SC-B-36374 B 80063 A SC-B-36374_80063__0001_B.C4
DP SC-B-36375 B 80063 A SC-B-36375_80063__0001_B.C4
DP SC-B-36376 C 80063 A SC-B-36376_80063__0001_C.C4
DP SC-B-36377 E 80063 A SC-B-36377_80063__0001_E.C4
DP SC-B-36378 B 80063 A SC-B-36378_80063__0001_B.C4
DP SC-B-84432 A 80063 A SC-B-84432_80063__0001_A.C4
DP SC-B-84435 B 80063 A SC-B-84435_80063__0001_B.C4
DP SC-B-84438 B 80063 A SC-B-84438_80063__0001_B.C4
DP SC-B-84440 B 80063 A SC-B-84440_80063__0001_B.C4
DP SC-B-84441 G 80063 A SC-B-84441_80063__0001_G.C4
DP SC-B-84442 D 80063 A SC-B-84442_80063__0001_D.C4
DP SC-B-84443 F 80063 A SC-B-84443_80063__0001_F.C4
DP SC-B-84444 B 80063 A SC-B-84444_80063__0001_B.C4
DP SC-B-84445 C 80063 A SC-B-84445_80063__0001_C.C4
DP SC-B-84446 D 80063 A SC-B-84446_80063__0001_D.C4
DP SC-B-84447 F 80063 A SC-B-84447_80063__0001_F.C4
DP SC-B-84448 C 80063 A SC-B-84448_80063__0001_C.C4
DP SC-B-84449 D 80063 A SC-B-84449_80063__0001_D.C4
DP SC-B-84451 D 80063 A SC-B-84451_80063__0001_D.C4
DP SC-B-84452 G 80063 A SC-B-84452_80063__0001_G.C4
DP SC-B-84453 C 80063 A SC-B-84453_80063__0001_C.C4
DP SC-B-84454 E 80063 A SC-B-84454_80063__0001_E.C4
DP SC-B-84456 B 80063 A SC-B-84456_80063__0001_B.C4
DP SC-B-84457 C 80063 A SC-B-84457_80063__0001_C.C4
DP SC-B-84458 - 80063 A SC-B-84458_80063__0001_.C4
DP SC-B-84459 D 80063 A SC-B-84459_80063__0001_D.C4
DP SC-B-84460 D 80063 A SC-B-84460_80063__0001_D.C4
file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
DP SC-B-84461 D 80063 A SC-B-84461_80063__0001_D.C4
DP SC-B-84465 F 80063 A SC-B-84465_80063__0001_F.C4
DP SC-B-84467 B 80063 A SC-B-84467_80063__0001_B.C4
DP SC-B-84470 C 80063 A SC-B-84470_80063__0001_C.C4
DP SC-B-84475 B 80063 A SC-B-84475_80063__0001_B.C4
DP SC-B-84476 C 80063 A SC-B-84476_80063__0001_C.C4
DP SC-B-84477 C 80063 A SC-B-84477_80063__0001_C.C4
DP SC-B-84479 A 80063 A SC-B-84479_80063__0001_A.C4
DP SC-B-84481 A 80063 A SC-B-84481_80063__0001_A.C4
DP SC-B-84483 A 80063 A SC-B-84483_80063__0001_A.C4
DP SC-B-84484 C 80063 A SC-B-84484_80063__0001_C.C4
DP SC-B-84485 C 80063 A SC-B-84485_80063__0001_C.C4
DP SC-B-84488 C 80063 A SC-B-84488_80063__0001_C.C4
DP SC-B-84490 B 80063 A SC-B-84490_80063__0001_B.C4
DP SC-B-84491 B 80063 A SC-B-84491_80063__0001_B.C4
DP SC-B-84492 A 80063 A SC-B-84492_80063__0001_A.C4
DP SC-B-84493 B 80063 A SC-B-84493_80063__0001_B.C4
DP SC-B-84495 B 80063 A SC-B-84495_80063__0001_B.C4
DP SC-B-84496 A 80063 A SC-B-84496_80063__0001_A.C4
DP SC-B-84497 - 80063 A SC-B-84497_80063__0001_.C4
DP SC-B-84499 A 80063 A SC-B-84499_80063__0001_A.C4
DP SC-B-84500 C 80063 A SC-B-84500_80063__0001_C.C4
DP SC-B-84502 B 80063 A SC-B-84502_80063__0001_B.C4
DP SC-B-84503 B 80063 A SC-B-84503_80063__0001_B.C4
DP SC-B-84504 B 80063 A SC-B-84504_80063__0001_B.C4
DP SC-B-84505 C 80063 A SC-B-84505_80063__0001_C.C4
DP SC-B-84506 - 80063 A SC-B-84506_80063__0001_.C4
DP SC-B-84507 C 80063 A SC-B-84507_80063__0001_C.C4
DP SC-B-84508 B 80063 A SC-B-84508_80063__0001_B.C4
DP SC-B-84509 B 80063 A SC-B-84509_80063__0001_B.C4
DP SC-B-84514 B 80063 A SC-B-84514_80063__0001_B.C4
DP SC-B-84515 C 80063 A SC-B-84515_80063__0001_C.C4
DP SC-B-84518 A 80063 A SC-B-84518_80063__0001_A.C4
DP SC-B-84520 A 80063 A SC-B-84520_80063__0001_A.C4
DP SC-B-84521 C 80063 A SC-B-84521_80063__0001_C.C4
DP SC-B-84527 E 80063 A SC-B-84527_80063__0001_E.C4
DP SC-B-84531 C 80063 A SC-B-84531_80063__0001_C.C4
DP SC-B-84532 B 80063 A SC-B-84532_80063__0001_B.C4
DP SC-B-84541 C 80063 A SC-B-84541_80063__0001_C.C4
DP SC-B-84544 C 80063 A SC-B-84544_80063__0001_C.C4
DP SC-B-84545 B 80063 A SC-B-84545_80063__0001_B.C4
DP SC-B-
140974 - 80063 A SC-B-140974_80063__0001_.C4
DP SC-B-
140981 B 80063 A SC-B-140981_80063__0001_B.C4
DP SC-B-
140983 B 80063 A SC-B-140983_80063__0001_B.C4
DP SC-B-
142206 A 80063 A SC-B-142206_80063__0001_A.C4
DP SC-C-35755 E 80063 A SC-C-35755_80063__0001_E.C4
file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
DP SC-C-35756 G 80063 A SC-C-35756_80063__0001_G.C4
DP SC-C-84430 A 80063 A SC-C-84430_80063__0001_A.C4
DP SC-C-84431 C 80063 A SC-C-84431_80063__0001_C.C4
DP SC-C-84478 D 80063 A SC-C-84478_80063__0001_D.C4
DP SC-D-33704 V 80063 A SC-D-33704_80063__0001_V.C4
DP SC-D-35754 H 80063 A SC-D-35754_80063__0001_H.C4
DP SM-A-
957243 - 80063 A SM-A-957243_80063__0001_.C4,SM-A-957243_80063__0002_.C4,SM-A-957243_80063__0003_.C4,SM-A-957243_80063__0004_.C4
DP SM-B-84450 J 80063 A SM-B-84450_80063__0001_J.C4
DP SM-B-84463 C 80063 A SM-B-84463_80063__0001_C.C4
DP SM-B-84468 E 80063 A SM-B-84468_80063__0001_E.C4
DP SM-B-84469 F 80063 A SM-B-84469_80063__0001_F.C4
DP SM-B-84480 B 80063 A SM-B-84480_80063__0001_B.C4
DP SM-B-84482 A 80063 A SM-B-84482_80063__0001_A.C4
DP SM-B-84486 D 80063 A SM-B-84486_80063__0001_D.C4
DP SM-B-84487 C 80063 A SM-B-84487_80063__0001_C.C4
DP SM-B-84489 D 80063 A SM-B-84489_80063__0001_D.C4
DP SM-B-84498 C 80063 A SM-B-84498_80063__0001_C.C4
DP SM-B-84513 E 80063 A SM-B-84513_80063__0001_E.C4
DP SM-B-84519 D 80063 A SM-B-84519_80063__0001_D.C4
DP SM-B-84522 C 80063 A SM-B-84522_80063__0001_C.C4
DP SM-B-84523 D 80063 A SM-B-84523_80063__0001_D.C4
DP SM-B-84543 D 80063 A SM-B-84543_80063__0001_D.C4
DP SM-B-
107677 E 80063 A SM-B-107677_80063__0001_E.C4
DP SM-B-
119923 C 80063 A SM-B-119923_80063__0001_C.C4
DP SM-B-
142204 D 80063 A SM-B-142204_80063__0001_D.C4
DP SM-B-
142205 G 80063 A SM-B-142205_80063__0001_G.C4
DP SM-B-
361801 A 80063 A SM-B-361801_80063__0001_A.C4
DP SM-B-
361802 C 80063 A SM-B-361802_80063__0001_C.C4
DP SM-B-
367456 B 80063 A SM-B-367456_80063__0001_B.C4
DP SM-B-
367460 A 80063 A SM-B-367460_80063__0001_A.C4
DP SM-B-
888119 A 80063 A SM-B-888119_80063__0001_A.C4
DP SM-B-
957240 - 80063 A SM-B-957240_80063__0001_.C4
DP SM-C-84462 J 80063 A SM-C-84462_80063__0001_J.C4
DP SM-C-84464 H 80063 A SM-C-84464_80063__0001_H.C4
DP SM-C-
119921 F 80063 A SM-C-119921_80063__0001_F.C4
DP SM-C-
119922 B 80063 A SM-C-119922_80063__0001_B.C4
DP SM-C-
361822 D 80063 A SM-C-361822_80063__0001_D.C4
DP SM-C-
367454 F 80063 A SM-C-367454_80063__0001_F.C4
file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
DP SM-C-
957241 - 80063 A SM-C-957241_80063__0001_.C4
DP SM-C-
957242 - 80063 A SM-C-957242_80063__0001_.C4
DP SM-D-84429 AD 80063 A SM-D-84429_80063__0001_AD.C4
DP SM-D-84439 J 80063 A SM-D-84439_80063__0001_J.C4
DP SM-D-84511 E 80063 A SM-D-84511_80063__0001_E.C4
DP SM-D-84512 D 80063 A SM-D-84512_80063__0001_D.C4
REF - REFERENCE DRAWING.
NO QUALITY ASSURANCE DOCUMENTS
APPLICABLE SPECIFICATIONS AND STANDARDS
QPL DOCUMENT
NUMBER
EXPORT
CONTROL
DISTRIBUTION
CODE
REV
SYM
AMD
NO.
CHG
NO.
SUPPL
NO.
DOCUMENT
DATE DOCUMENT TITLE NOTE
A-A-59551 A A 2009-10-22 WIRE, ELECTRICAL, COPPER (UNINSULATED) *
AISI-12L14 STANDARD REPHOSPHORIZED,RESULFURIZED CARBON STEELS
ANSI/NEMA
MW 1000 2011-01-01 MAGNET WIRE **
ASTM A108 2007-09-01 STEEL BAR, CARBON AND ALLOY, COLD-FINISHED, STANDARD SPECIFICATION FOR **
ASTM
A228/A228M 2007-12-01 WIRE, STEEL, MUSIC SPRING QUALITY **
ASTM
A240/A240M A 2012-11-01 CHROMIUM AND CHROMIUM-NICKEL STAINLESS STEEL PLATE, SHEET AND STRIP FOR PRESSURE
VESSELS AND GENERAL APPLICATIONS **
ASTM
A313/A313M 2010-04-01 STAINLESS STEEL SPRING WIRE, STANDARD SPECIFICATION FOR **
ASTM
A513/A513M 2012-05-01 ELECTRIC-RESISTANCE-WELDED CARBON AND ALLOY STEEL MECHANICAL TUBING, STANDARD
SPECIFICATION FOR **
ASTM A519 2006-10-01 STD SPECIFICATION FOR SEAMLESS CARBON AND ALLOY STEEL MECHANICAL TUBING ** ASTM A575 1996-11-10 STEEL BARS, CARBON, MERCHANT QUALITY, M-GRADES, STANDARD SPECIFICATION FOR **
ASTM A576 B 1990-08-31 ***DEFICIENCY*** **
ASTM
A580/A580M 2008-10-01 STAINLESS STEEL WIRE, STANDARD SPECIFICATION FOR **
ASTM
A663/A663M 2012-05-01 STEEL BARS, CARBON, MERCHANT QUALITY, MECH PROPERTIES **
ASTM
A675/A675M 2003-10-10 STEEL BARS, CARBON, HOT-WROUGHT, SPECIAL QUALITY, MECHANICAL PROPERTIES, STANDARD
SPECIFICATION FOR **
ASTM A693 2006-03-01 PRECIPITATION-HARDENING STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP, STANDARD SPECIFICATION FOR **
ASTM A848 A 2001-12-10 LOW-CARBON MAGNETIC IRON **
ASTM
B16/B16M 2010-10-01 FREE-CUTTING BRASS ROD, BAR AND SHAPES FOR USE IN SCREW MACHINES, STANDARD
SPECIFICATION FOR **
ASTM
B36/B36M A 2008-10-01 BRASS PLATE, SHEET, STRIP, AND ROLLED BAR, STANDARD SPECIFICATION FOR **
ASTM
B121/B121M 2011-10-01 LEADED BRASS PLATE, SHEET, STRIP, AND ROLLED BAR, STANDARD SPECIFICATION FOR **
ASTM
B122/B122M 2011-10-01 COPPER-NICKEL-TIN ALLOY, COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER), AND COPPER-
NICKEL ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR **
ASTM
B124/B124M 2012-04-01 COPPER AND COPPER ALLOY FORGING ROD, BAR, AND SHAPES **
ASTM
B151/B151M 2005-10-01 COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) AND COPPER-NICKEL ROD AND BAR ** file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
ASTM
B152/B152M 2009-10-01 COPPER SHEET, STRIP, PLATE, AND ROLLED BAR, STANDARD SPECIFICATION FOR **
ASTM B194 2008-04-01 STD SPECIFICATION FOR COPPER-BERYLLUM ALLOY PLATE,SHEET,STRIP,AND ROLLER BAR **
ASTM
B196/B196M 2007-04-01 COPPER-BERYLLIUM ALLOY ROD AND BAR, STANDARD SPECIFICATION FOR **
ASTM
B197/B197M 2007-10-01 COPPER-BERYLLIUM ALLOY WIRE, STANDARD SPECIFICATION FOR **
ASTM
B206/B206M 2007-04-01 COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) WIRE AND COPPER-NICKEL ALLOY WIRE, STANDARD SPECIFICATION FOR **
ASTM B209 2010-11-01 STANDARD SPECIFATION FOR ALUMINUM AND ALUMINUM-ALLOY SHEET AND PLATE ** ASTM B221 2012-01-15 ALUMINUM AND ALUMINUM-ALLOY EXTRUDED BARS, RODS, WIRE, PROFILES, AND TUBES **
ASTM
B241/B241M 2010-12-01 ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE, STANDARD SPECIFICATION FOR **
ASTM D295 2012-01-15 VARNISHED COTTON FABRICS USED FOR ELECTRICAL INSULATION, STANDARD TEST METHODS
FOR **
ASTM D709 2001-09-10 LAMINATED THERMOSETTING MATERIALS, STANDARD SPECIFICATION FOR ** ASTM D3955 2004-03-01 ELECTRICAL INSULATING VARNISHES, STANDARD SPECIFICATION FOR ** ASTM D4066 A 2001-08-10 NYLON INJECTION AND EXTRUSION MATERIALS (PA), STANDARD CLASSIFICATION SYSTEM FOR **
ASTM-B122 COPPER-NIK-TIN ALY,COP-NKL-ZINC ALY (NIK SIL)/NOTI
ASTM-B197 COPPER-BERYLLIUM ALLOY WIRE (METRIC)/NOTICE 1/
AWS
D17.2/D17.2M Yes 2007-01-01 RESISTANCE WELDING FOR AEROSPACE APPLICATIONS, SPECIFICATION FOR **
FF-N-836 E 1994-09-14 NUT SQUARE HEXAGON CAP SLOTTED CASTLE KNURLED *
FF-S-92 B 1 1975-07-31 SCREW MACHINE SLOTTED CROSS RECESSED OR HEXAGON HE *
IPC J-STD-
004 B 2008-12-01 SOLDERING FLUXES, REQUIREMENTS FOR **
IPC J-STD-
005 A 2012-02-01 REQUIREMENTS SOLDERING PASTES **
IPC J-STD-
006 B 2006-01-01 REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED
SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS **
L-P-380 C 1 1989-08-03 PLASTIC MOLDING MATERIAL,METHACRYLATE *
MIL-C-
3849/11 CORD,ELEC/CL PSBL,POLY INSUL EXTRUDED STY BUTADIEN
MIL-C-3885 G 2010-11-29 CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL *
MIL-C-10578 D 3 3 1998-04-22 CORROSION REMOVING & MET COND CMPD (PHOSPHORIC ACI *
MIL-DTL-
13924 A D 1 2003-12-22 COATING, OXIDE, BLACK, FOR FERROUS METALS *
MIL-DTL-
14072 E 2007-05-31 FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT *
MIL-I-631 D 6 1987-06-02 INSUL, ELEC, SYNTHETIC-RESIN COMPOSITION, NONRIGID *
MIL-I-3190 F 2 1993-08-28 INSULATION SLEEVING *
MIL-I-24092 D 1 1993-09-21 INSULATING VARNISHES AND SOLVENTLESS RESINS *
MIL-I-24768/8 A 1992-02-25 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, MELAMINE-RESIN (GMG) *
MIL-I-24768/9 1992-02-25 INSULATION *
MIL-I-
24768/10 1992-02-25 INSULATION *
MIL-I-
24768/11 1992-02-25 INSULATION *
MIL-I-
24768/12 A 1992-02-25 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, PAPER-BASE, PHENOLIC-RESIN (PBM) *
MIL-I-
24768/13 A 1992-02-25 INSULATION, PLASTICS, LAMINATED, THERMOSETTING; COTTON-FABRIC-BASE PHENOLIC-RESIN
(FBE) *
MIL-I- 1992-02-25 PLASTIC RODS AND TUBES *
file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
24768/14
MIL-I-
24768/16 A 1992-02-25 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE, PHENOLIC-RESIN
(FBM) *
MIL-P-642 D 3 2000-01-24 PLUG, TELEPHONE, AND ACCESSORY SCREWS, GENL SPEC F *
MIL-PRF-
19500/286 K 2013-05-24 SEMICONDUCTOR DEVICE, DIODE, SILICON, POWER RECTIFIER TYPES, 1N4245 THROUGH 1N42 *
MIL-STD-202 G 1 2003-07-18 ELECTRONIC & ELEC CMPNT PT, TEST MTHD /CHG NOTICE *
MIL-STD-
13231 A 1999-11-02 MARKING OF ELECTRONIC ITEMS *
MIL-T-4053 B 2 1997-08-11 TAPE,PRESSURE-SENSITIVE,ADH/CRE/ *
MIL-W-76 D 1 4 2013-02-26 WIRE & CABLE, HOOK-UP, ELEC, INSULATED, GENL SPEC *
QQ-B-654 A A 1 1 1991-02-07 BRAZING ALLOYS, SILVER *
QQ-S-698 A 4 5 2007-05-30 STEEL, SHEET AND STRIP, LOW CARBON *
SAE
AMS4025 L 2008-07-15 ALUMINUM ALLOY, SHEET AND PLATE 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0) ANNEALED
(COMPOSITION SIMILAR TO UNS A96061) **
SAE
AMS4026 M 2008-07-15 ALUMINUM ALLOY, SHEET AND PLATE 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T4 SHEET, -T451
PLATE) SOLUTION HEAT TREATED AND NATURALLY AGED **
SAE
AMS4027 N 2008-07-15 ALUMINUM ALLOY, SHEET AND PLATE 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6 SHEET, -T651
PLATE) SOLUTION AND PRECIPITATION HEAT TREATED **
SAE AMS-
QQ-A-225/6 A 2010-05-01 ALUMINUM ALLOY, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED **
SAE AMS-
QQ-A-250 A 2004-08-01 ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET, GENERAL SPECIFICATION FOR **
SAE AMS-
QQ-S-763 B 2003-02-01 STEEL BARS, WIRE,SHAPES & FORGINGS; CORROSION RESISTANT (INACTIVE STATUS) **
* - NOT FURNISHED - TO BE OBTAINED FROM STANDARDIZATION DOCUMENTS ORDER DESK, BLDG. 4D, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094 - IF NOT AVAILABLE, IMMEDIATELY ADVISE THE PROCURING CONTRACTING OFFICER.
** - NOT FURNISHED - COMMERCIAL SPECIFICATIONS AND STANDARDS MAY BE OBTAINED FROM THE PUBLISHERS. THEY ARE NOT AVAILABLE FROM GOVERNMENT SOURCES.
Q - THE LETTER (Q) BEFORE THE SPECIFICATION NUMBER INDICATES THAT A QUALIFIED PRODUCTS LIST IS REQUIRED. THE NUMBER OF THE QPL IS THE SAME AS THE NUMBER OF THE
SPECIFICATION.
NOTICE: UNLESS OTHERWISE NOTED, ALL MIL-STD'S ARE USED FOR REFERENCE ONLY OR HAVE BEEN REPLACED. (I/M = INTERFACE PRACTICE / USE OF STD IS MANDATORY)
REPLACED SPECIFICATIONS AND STANDARDS
DOC NUMBER REPLACEMENT INFORMATION
A-A-900 CANCELLED WITHOUT REPLACEMENT
A-A-1266 CANCELLED WITHOUT REPLACEMENT
A-A-1916 CANCELLED WITHOUT REPLACEMENT
ASTM A177 NO SUPERSEDING DOCUMENT
ASTM A228 REWRITTEN AS ASTM A228/A228M
ASTM A240 REPLACED BY ASTM A240/A240M
ASTM A313 REPLACED BY ASTM A313/A313M
ASTM A580 REPLACED BY ASTM A580/A580M
ASTM A663 REPLACED BY ASTM A663/A663M
ASTM A666 SUPERSEDED BY ASTM A177
ASTM A675 REPLACED BY ASTM A675/A675M
ASTM B16 REPLACED BY ASTM B16/B16M
ASTM B16M REPLACED BY ASTM B16/B16M
ASTM B36 REWRITTEN AS ASTM B36/B36M
ASTM B121 WRITTEN AS ASTM B121/B121M
ASTM B122 REPLACED BY ASTM B122/B122M
file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
ASTM B124 WRITTEN AS ASTM B124/B124M
ASTM B151 REPLACED BY ASTM B151/B151M
ASTM B151M SUPERSEDED BY ASTM B151/B151M
ASTM B152 REPLACED BY ASTM B152/B152M
ASTM B196 REWRITTEN AS ASTM B196/B196M
ASTM B197 REPLACED BY ASTM B197/B197M
ASTM B206 REPLACED BY ASTM B206/B206M
ASTM B206M WRITTEN AS ASTM B206/B206M
J-STD-004 WRITTEN AS IPC J-STD-004
J-STD-005 WRITTEN AS IPC J-STD-005
J-STD-006 WRITTEN AS IPC J-STD-006
J-W-1177 REPLACED BY ANSI/NEMA MW 1000
L-M-500 REPLACED BY L-P-380
L-P-513 REPLACED BY ASTM D709
MIL-C-13924 REWRITTEN AS MIL-DTL-13924
MIL-F-14072 REWRITTEN AS MIL-DTL-14072
MIL-I-11695 REPLACED BY ASTM A848
MIL-M-13231 REPLACED BY MIL-STD-13231
MIL-M-20693 REPLACED BY ASTM D4066
MIL-P-79 REPLACED BY MIL-I-24768/8, MIL-I-24768/10, MIL-I-24768/11, MIL-I-24768/12, MIL-I-24768/13, MIL-I-24768/14, MIL-I-24786-16
MIL-P-3115 REPLACED BY L-P-513
MIL-P-15047 REPLACED BY MIL-I-24768/9
MIL-S-19500/286 REWRITTEN AS REWRITTEN AS MIL-PRF-19500/286
MIL-V-173 USERS MAY CONSULT ASTM D3955 AND ASTM D295 AS POSSIBLE REPLACEMENTS
MIL-V-1137 REPLACED BY MIL-I-24092
MIL-W-583 REPLACED BY J-W-1177
MIL-W-6858 REPLACED BY SAE-AMS-W-6858
QQ-A-200/9 REPLACED BY ASTM B241/B241M, ASTM B221 AND SAE AMS-QQ-A-200/9
QQ-A-225/6 REPLACED BY SAE AMS-QQ-A-225/6
QQ-A-250/2 REPLACED BY SAE AMS-QQ-A-250, ASTM B209
QQ-A-250/8 REPLACED BY SAE AMS-QQ-A-250 AND ASTM B209
QQ-A-250/11 REPLACED BY SAE AMS-QQ-A-250/11, ASTM B209
QQ-A-268 REPLACED BY QQ-A-225/6
QQ-A-318 REPLACED BY QQ-A-250/8
QQ-A-327 REPLACED BY QQ-A-250/11
QQ-B-613 REPLACED BY ASTM B36 AND ASTM B121
QQ-B-626 REPLACED BY ASTM-B121, ASTM-B36, ASTM B16, ASTM B16M, AND ASTM B124
QQ-C-530 REPLACED BY ASTM B196, ASTM B197, AND ASTM B194
QQ-C-576 REPLACED BY ASTM B152
QQ-C-585 REPLACED BY ASTM B122
QQ-C-586 SUPERSEDED BY ASTM B122, ASTM B151, ASTM B151M, ASTM B206, AND ASTM B206M
QQ-S-561 REPLACED BY QQ-B-654
QQ-S-571 REPLACED BY J-STD-004, J-STD-005 AND J-STD-006
QQ-S-630 REPLACED BY ASTM A575 AND ASTM A663
QQ-S-631 REPLACED BY ASTM A576 AND A675
QQ-S-633 REPLACED BY QQ-S-630, QQ-S-631, QQ-S-634 AND QQ-S-637
QQ-S-634 REPLACED BY ASTM A108
QQ-S-636 REPLACED BY QQ-S-698
QQ-S-637 REPLACED BY ASTM A108
file:///C|/Users/melissa.a.fox2/Documents/ARPS/ARMS%20%23%2010649/TDPL/MAIN.HTM[9/14/2015 11:45:52 AM]
QQ-S-763 REPLACED BY SAE AMS-QQ-S-763
QQ-S-766 REPLACED BY ASTM A240, ASTM A666, AND ASTM A693
QQ-T-830 REPLACED BY ASTM A513/A513M AND ASTM A519
QQ-W-343 REPLACED BY A-A-59551
QQ-W-423 REPLACED BY ASTM A313 AND ASTM A580
QQ-W-470 REPLACED BY ASTM A228
SAE AMS-QQ-A-200/9 SUPERSEDED BY ASTM B241/B241M
SAE AMS-QQ-A-250/11 REPLACED BY SAE AMS4025, SAE AMS4026, SAE AMS4027 AND ASTM B209
SAE AMS-W-6858 SUPERSEDED BY AWS D17.2/D17.2M
SAE-AMS-W-6858 WRITTEN AS SAE AMS-W-6858
UU-T-81 REPLACED BY A-A-1266, A-A-1916 OR A-A-900
NO APPROVED ENGINEERING CHANGES OUTSTANDING
*** END OF TDPL ***
S e p te m b e r 1
, 2
:0
P M
[ S M
-D -8
A D p te m b e r 1
, 2
:5
A
M [ S
M -B
-3
C p te m b e r 1
, 2
:2
A
M [ S
C -B
-1
B p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8
A p te m b e r 1
, 2
:3
A
M [ S
C -C
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -C
-1
F p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
P M
[ S M
-C -1 p te m b e r 1
, 2
:5
A
M [ S
M -B
-1 p te m b e r 1
, 2
:2
A
M [ S
C -C
-8 p te m b e r 1
, 2
:2
A
M [ S
C -C
-8 p te m b e r 1
, 2
:0
P M
[ S M
-D -8
J ] p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -C
-8 p te m b e r 1
, 2
:0
P M
[ S M
-C -9 p te m b e r 1
, 2
:5
A
M [ S
M -B
-9 p te m b e r 1
, 2
:0
P M
[ S M
-C -9 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8
E p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -C
-8
H p te m b e r 1
, 2
:5
A
M [ S
M -B
-1 p te m b e r 1
, 2
:5
A
M [ S
M -B
-1
G p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-3 p te m b e r 1
, 2
:0
P M
[ S M
-C -3 p te m b e r 1
, 2
:5
A
M [ S
M -B
-3 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-1 p te m b e r 1
, 2
:1
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:0
A
M [ S
C -B
-8 p te m b e r 1
, 2
:3
A
M [ S
C -D
-3
H p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-3 p te m b e r 1
, 2
:0
P M
[ S M
-D -8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-1 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:5
A
M [ S
M -B
-8 p te m b e r 1
, 2
:0
P M
[ S M
-D -8 p te m b e r 1
, 2
:2
A
M [ S
C -C
-3 p te m b e r 1
, 2
:2
A
M [ S
C -C
-3 p te m b e r
:0
M
C
-B -3 p te m b e r
:0
C
-B -3 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r
:0
C
-B -3 p te m b e r
:0
C
-B -3 p te m b e r
:0
C
-B -3 p te m b e r
:2
C
-B -8 p te m b e r
:2
C
-B -8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-1 p te m b e r 1
, 2
:2
A
M [ S
C -B
-8 p te m b e r 1
, 2
:2
A
M [ S
C -B
-1 p te m b e r
:0
C
-B -3 p te m b e r 1
, 2
:3
A
M [ S
C -D
-3
V p te m b e r 1
, 2
:0
A
M [ S
C -A
-1 p te m b e r 1
, 2
:0
A
M [ S
C -A
-4
D
P
G
S C
-A -4 p te m b e r 1
, 2
:3
A
M [ S
C -A
-4 p te m b e r 1
, 2
:2
P M
[ S C
-A -4
D P
G
S
C -A
-4
N O T I C E
O F
C A N C E L A T I O N
A A B
N O T I C E
O c t o b e r
C O M M E R C I A L
I T E M
D E S C R I P T I O N S
C I D S
T A G
S H I P P I N G
S T O C K
C I R C U L A R
A A B d a t e d
F e b r u a r y i s h e r e b y c a n c e l e d w i t h o u t r e p l a c e m e n t
C u s t o d i a n s
P r e p a r i n g a c t i v i t y
A r m y
G L
A r m y
G L
N a v y
S A
A i r
F o r c e
R e v i e w a c t i v i t i e s
A r m y
A T
C R
E A, M D
N a v y
M C
Y D
A i r
F o r c e
A M S C
N A
F S C
D I S T R I B U T I O N
S T A T E M E N T
A A p p r o v e d f o r p u b l i c r e l e a s e d i s t r i b u t i o n i s u n l i m i t e d
SC
N
/A
FSC
D
ISTRIBU
TIO
N
STA
TEM
EN
T A. A pproved for public release; distribution is unlim ited.
N O
TIC
E O
F
IN
C H
-PO
U
N D
CA
N
CELLA
TIO
N
L-P-513C N
O
TIC
E 2 26 M ay 2000
SU
PERSED
IN
G N
O
TIC
E 1 7 July 1987
FED
ERA
L SPECIFICA
TIO
N
PLA
STIC SH
EET A
N
D
IN
SU
LA
TIO
N
SH
EET, ELECTRICA
L
(LA
M
IN
A
TED
, TH
ERM
O
SETTIN
G
, PA
PER-BA
SE, PH
EN
LO
IC-RESIN
L-P-513C , dated 19 D ecem ber 1968, is hereby canceled. Future acquisition for this m aterial should refer to A
STM
D
709, "STA
N
D A
RD
SPECIFICA
TIO
N
FO
R LA
M
IN
A
TED
TH
ERM
O
SETTIN
G M
A
TERIA
LS".
(A pplications for copies of A
STM
publications should be addressed to the A m erican Society of
Testing and M aterials, 100 Barr H arbor D rive, W est C onshohocken, PA
19428-2959.)
The follow ing inform ation is provided for cross-reference purposes:
L-P-513C D esignation A
STM
D
G rade D esignation
Type PBE Type PBE-P Type PBG
X X
X X
X X
P and X X
X
PC
X X
M
ILITA
RY
IN
TERESTS:
CIV
IL A
G
EN
CY
CO
O
RD
IN
A
TIN
G A
CTIV
ITY
Custodians:
A rm y - CR4
N avy - A
S A ir Force - 11
G
SA
- 7FX
E
Review ers:
Preparing activity:
A rm y - EA
, M I, M
R N avy - EC D
LA
- G
(Project 9330-0110)
ETR
IC
IL-D
TL-14072E(C
R
31 M ay 2007
SU
PER
SED
IN
IL-F-14072D
(ER
4 O ctober 1990
D
ETA
IL SPEC
IFIC
A
TIO
FIN
ISH
ES FO
R
G R
O U
N D
B A
SED
ELEC
TR
O
N
IC
EQ
U
IPM
EN
T
This specification is approved for use by the D epartm ent of the A rm y and is available for use by all D epartm ents and A gencies of the D epartm ent of D efense.
1. SC
PE
1.1 Scope. This specification covers requirem
ents for finishes necessary to protect ground electronic equipm ent from the deteriorating effects of clim atic conditions encountered in m ilitary use.
1.2 C
onditions and applicability. W hen it is felt that the finish requirem ents of this docum ent m ay com prom ise the perform ance of the equipm ent, the designer should consider other possibilities, such as the use of com patible, inherently corrosion-resistant m aterials. For exam ple, heat dissipation requirem ents of equipm ent m ay require special consideration to provide for optim um therm al conductivity. In such a case, the use of castings, w elded pieces, clad m etals, etc., w hich reduce the num ber of interfaces m ay be satisfactory. A prudent choice of m aterials in the design stage w ill result in few er finishing, corrosion, and environm ental problem s.
1.3 C
lassification. For application of finishes to ground electronic equipm ent, surfaces are classified by exposure as follow s:
C om m ents, suggestions, or questions this docum ent should be addressed to:
C om m ander, U S A rm y C om m unications-Electronics Life C ycle M anagem ent C om m and, A
TTN
: A
M
SEL-LC
-LEO
-E-A
V , Fort M onm outh, N
J 07703-5023 or em ailed to
Jeffrey.C arver@ us.arm y.m
il. Since contact inform ation can change, you m ay w ant to verify the currency of this address inform ation using the A
SSIST O
nline database at http://assist.daps.dla.m il.
A M
SC
/A
FSC
FFP
D
ISTR
IB
U
TIO
N
STA
TEM
EN
T A . A pproved for public release, distribution is unlim ited.
TL-14072E(C
R
Type I (Exposed). Type I surfaces are areas, either exposed to view w hen equipm ent is in operating or traveling condition, or areas not exposed to view but subject to com bined direct action of clim atic elem ents. C lim atic elem ents include tem perature extrem es, hum idity extrem es, rain, hail, snow , sleet, salt-laden air, industrial atm ospheres, direct solar radiation, dust, and w ind blow n sand. For exam ple, the outside surfaces of any equipm ent are Type I areas; the inside surfaces of an open fram e m otor are Type I areas.
Type II (Sheltered). Type II surfaces are areas not exposed to view during equipm ent operation and not subject to direct action of rain, hail, snow , sleet, direct solar radiation, and sand. For exam ple, the interior surfaces of a radio receiver or sw itchboard are considered Type II areas.
ny Type I finish is adequate protection for Type II exposures.
2. A
PPLIC
A
B
LE D
O C
U M
EN
TS
2.1 G
eneral. The docum ents listed in this section are specified in sections 3, 4 or
5 of this specification. This section does not include docum ents cited in other sections of this specification or recom m ended for additional inform ation or as exam ples. W hile every effort has been m ade to ensure the com pleteness of this list, docum ent users are cautioned that they m ust m eet all specified requirem ents of docum ents cited in sections 3, 4 or 5 of this specification, w hether or not they are listed.
2.2 G
overnm ent docum ents.
2.2.1 Specifications, standards, and handbooks. The follow
ing specifications, standards, and handbooks form a part of this docum ent to the extent specified herein.
U nless otherw ise specified, the issues of these docum ents are be those cited in the solicitation or contract.
FED
ER
A
L SPEC
IFIC
A
TIO
N S
A -A
-59298
Tape, Pressure Sensitive A dhesive
A -A
-59313
Thread C om pound, A ntiseize, Zinc, D ust- Petrolatum
TT-C
-490
C hem ical C onversion C oatings and Pretreatm ents for Ferrous Surfaces (B ase for
O rganic C oatings).
TT-P-28
Paint, A lum inum
, H eat R esisting (1200 F).
TT-P-1757
Prim er C oating, A lkyd B ase, O ne C om ponent.
TL-14072E(C
R
EPA
R
TM
EN
T O F D
EFEN
SE SPEC
IFIC
A
TIO
N
S
M
IL-F-495
Finish, C hem ical, B lack, for C opper A lloys.
M
IL-D
TL-5541
C hem ical C onversion C oatings on A lum inum and A inum
A lloys.
M
IL-A
-8625
A nodic C oatings for A lum inum and A lloys.
M
IL-C
-10578
(Inactive)
C orrosion R em oving and M etal C onditioning com pound (Phosphoric A cid B ase).
M
IL-L-13808
Lead Plating, Electrodeposited.
M
IL-P-14105
Paint, H eat-R esisting (For Steel Surfaces).
M
IL- D
TL-15090
Enam el, Equipm ent, Light G ray (N avy Form ula
N
o. 111).
D O
D -P-15328
Prim er (W ash), Pretreatm ent (Form ula N
o. 117 for M etals).
M
TL-16232
Phosphate C oating, H eavy, M anganese or Zinc B ase M
IL- PR
F-22750
C oating, Epoxy H igh-Solids.
M
IL-PR
F-23377
Prim er C oatings, Epoxy H igh-Solids.
M
IL-C
-43616
C leaning C om pounds, A ircraft Surface.
M
IL-R
-46085
R hodium Plating, Electrodeposited.
M
IL-E-52891
(Inactive)
Enam el, Lusterless, Zinc Phosphate, Styrenated
A lkyd Type
M
IL-P-53022
Prim er, Epoxy C oating, C orrosion Inhibiting, Lead and C hrom ate Free.
M
IL-P-53030
Prim er C oating, Epoxy, W ater R educible, Lead and C hrom ate Free.
M
IL-D
TL-53039
C oating, A liphatic Polyurethane, Single
C om ponent, C hem ical A gent R esistant.
M
IL-P-53084
Prim er, C athodic Electordeposition, C hem ical A gent R esistant.
M
IL-R
-81294 (Inactive)
R em over, Paint, Epoxy, Polysulfide and
Polyurethane System s.
M
IL- PR
F-81733
Sealing and C oating C om pound, C orrosion Inhibitive.
M
IL-PR
F-85582
Prim er C oatings: Epoxy, W aterborne.
M
IL-C
-87115 (Inactive)
C oating, Im m ersion Zinc Flake/C hrom ate ispersion.
TL-14072E(C
R
FED
ER
A
L STA
N D
A R
D S
FED
-STD
-595
C olors (C hip N um bers 14084, 16376, 17038, 24084, 24410, 24533, 26152, 26307, 27038, 27875, 30051, 33446, 34088, 34094, 36118, 27875).
EPA
R
TM
EN
T O F D
EFEN
SE STA
N D
A R
D S
M
IL-STD
-1500 (Inactive)
C adm ium
-titanium Plating, Low
Em brittlem ent, Electrodeposition.
M
IL-STD
-1501
C hrom ium Plating, Low
Em brittlem ent, Electrodeposition.
(C opies of these docum ents are available online at http://assist.daps.dla.m il/quicksearch or from the Standardization D ocum ents O rder D esk, 700 R obbins A venue, B uilding 4D , Philadelphia, PA
19111-5094.)
2.3 N
on-G overnm ent publications. The follow ing docum ents form a part of this docum ent to the extent specified herein. U nless otherw ise specified, the issues of these docum ents are those cited in the solicitation or contract.
ER
IC
A
N
SO
C
IETY
FO
R
TESTIN
G
A N
D M
A
TER
IA
LS (A
STM
A
STM
A 123/A
123M
Zinc (H ot D ip G alvanized) C oatings on Iron and
Steel Products, Standard Specification for.
A
STM
A
153/A 153M
Standard Specification for Zinc C oating (H ot D
ip) on Iron and Steel H ardw are.
A
STM
B
Standard G uide for Preparation of A lloys for Electroplating A
STM
A
Standard Practice for C leaning, D escaling and Passivation of Stainless Steel Parts, Equipm ent and System s.
A
STM
B
Standard Specification for Electrodeposited C oatings of G old for Engineering U ses.
A
STM
B
Standard Specification for Electrodeposited C oatings of Tin A
STM
B
Standard Specification for Electrodeposited C oatings of Tin-lead A lloy, (Solder Plate).
A
STM
B
Standard Specification for Electrodeposited C oatings of Zinc O n Iron and Steel.
A
STM
B
Standard Specification for Electrodeposited C oatings of Silver for Engineering U se.
A
STM
D
Standard Practices for Preparation of M agnesium lloy Surfaces for Painting.
A
STM
D
Standard G uide for Preparation of Zinc-C oated
(G alvanized) Steel Surfaces for Painting
TL-14072E(C
R
(C opies of these docum ents are available from w w w
.astm .org or the A m erican Society for Testing and M aterials, 1916 R ace Street, Philadelphia, PA 19103-1187.)
SSO
C
IA
TIO
N C
O N
N
EC
TIN
G
ELEC
TR
O N
IC
S IN
D U
STR
IES (IPC
IPC
-J-STD
-004
R equirem ents for Soldering Fluxes.
IPC
-J-STD
-005
R equirem ents for Soldering Pastes.
IPC
-J-STD
-006
R equirem ents for Electronic G rade Solder A lloys and Fluxed and N on-Fluxed Solid Solders for Electronic Soldering A pplications.
(C opies of these docum ents are available from w w w .ipc.org or the A ssociation C onnecting Electronics Industries, 3000 Lakeside D rive, Suite 309S, B annockburn, IL 60015)
STER
PA
IN
TER
S IN
STITU
TE
R eference N
o. 9
Exterior A lkyd Enam el, G loss, M
PI G
loss Level
6.
R eference N
o. 19
Inorganic Zinc R ich Prim er.
R eference N
o. 47
Interior A lkyd, Sem i-G loss, M
PI G
loss Level 5.
R eference N
o. 49
Interior A lkyd, Flat, M
PI G
loss Level 1.
(C opies of these docum ents are available from w .specifypaint.com
/A PL/paintinfo_A
PL/ProductIdxB yM
PInum .asp or the M aster Painters Institute (H
Q ), 4090 G raveley Street, B urnaby, B ritish C olum bia, C anada, V 5C
3T6)
SO
IETY
O F A
U
TO
M O
TIV
E EN
G
IN
EER
S (SA
E)
SA
E-A
M S-2403
Plating, N ickel, G eneral Purpose.
SA
E-A
M S-2418
Plating, C opper
SA
E-A M
S-2422
Plating, G old
SA
E-A
M S-3276
Sealing C om pound, Integral Fuel Tanks and
G eneral Purpose, Interm ittent U se to 360
F (182
C
SA
E-A
M S-M
-3171
M agnesium
A lloy, Processes for Pretreatm ent and Prevention of C orrosion on
SA
E-A M
S-S-8802
Sealing C om pound, Tem perature-R esistant, Integral Fuel Tanks and Fuel C ell C avities, H igh A dhesion
SA
E A M
S-C -26074
C oatings, Electroless N ickel, R equirem ents for
SA
E-A
M S-P-81728
Plating, Tin-Lead (Electrodeposited).
SA
E-A
M S-Q
Q -C
-320
C hrom ium Plating (Electrodeposited).
SA
E-A
M S-Q
Q -P-416
Plating, C adm ium
(Electrodeposited).
TL-14072E(C
R
(C opies of these docum ents are available from w w w
.sae.org or SA E W orld H eadquarters, 400 C om m onw ealth D rive, W arrendale, PA 15096-0001.)
SO
IETY
O
F PR
O
TEC
TIV
E C
O A
TIN
G
S
SSPC
Paint 25
Zinc O xide, A lkyd, R aw Linseed O il, Prim er, and Prim er, for U se O ver H and C leaned Steel.
SSPC
Paint 30
W eld-Through Inorganic Zinc Prim er
(C opies of these docum ents are available from http://w w w
.sspc.org or The Society for Protective C oatings, 40 24 th Street 6 th Floor, Pittsburgh, PA 15222-4656. ).
2.4 O
rder of precedence. In the event of a conflict betw een the text of this docum ent and the references cited herein, the text of this docum ent takes precedence.
N othing in this docum ent, how ever, supersedes applicable law s and regulations unless a specific exem ption has been obtained.
3. R
EQ
U
IR
EM
EN
TS
3.1 G
eneral. Selection of finishes shall be in accordance w ith the requirem ents contained herein. Finishes selected shall conform to the specified thickness and shall not interfere w ith the perform ance requirem ents of the equipm ent. Finishes, applied in accordance w ith this specification, w ill inhibit the corrosion of m etals and deterioration of w ood.
3.2 First article. The contractor shall furnish a sam
ple unit(s) for first article inspection of finishes as specified in the part or equipm ent docum ent.
3.3 M
aterials. Finishing m aterials shall be in accordance w ith the requirem ents specified herein. The contractor shall have in his possession, for exam ination by the contracting officer or his duly authorized representative, satisfactory evidence that m aterials used on the order com ply w ith this specification.
3.4 Substitution for specified finishes, processes, or m
aterials. If, due to special conditions of service or design, the contractor considers that finishes, processes, or m aterials other than those specified herein are necessary or m ore suitable, such finishes, processes, or m aterials shall be used only upon receipt of prior approval from the contracting officer. A t the discretion of the contracting officer, sam ples m ay be required to dem onstrate the suitability of proposed substitutes.
3.4.1 “P” finishes on ferrous alloys. Table I perm its finishes on ferrous alloys (other than corrosion-resistant steels) w hen tank phosphating is not practical.
Phosphating in a tank m ay not be practical due to size, shape, or part fabrication m ethod such as w elding. Prior to using these finishes, the contractor shall prove, to the satisfaction of the contracting officer, that tank phosphating is not practical.
TL-14072E(C
R
3.4.2 Plating of holes and recesses. W
hen it is not practicable to m eet specific thickness requirem ents for finishes in holes or other recesses, the contractor shall subm it a proposal for finishing such holes and recesses for review and approval by the contracting officer.
3.5 O
perations prior to application of finishes.
3.5.1 C
ut edges. The edges of all m etals in exterior locations shall be rounded to prom ote adhesion and adequate thickness of subsequently applied paint. This is not possible over sharp edges. A fter rounding edges, applicable pretreatm ent coats shall be applied (Table I). R ounding to a radius of approxim ately 3.18 m m shall be accom plished prior to electroplating to im prove plating at edge areas.
3.5.2 D
efect repair. The use of any m aterial(s) for the purpose of filling or sealing nicks, dents, gouges and poor joints is prohibited.
3.5.3 M
asking. Prior to painting base m etal parts containing areas specifically intended for electrical contact or heat transm ission, these areas shall be m asked off or otherw ise protected during finishing. U nless otherw ise specified, plastics, rubber, fabrics and w orking parts of m achinery shall also be m asked off or otherw ise protected. W hen m asking tape is used, it shall be a type w hich w ill not adversely affect the finish or the equipm
3.5.4 Preparatory cleaning. Prior to application of any finish, all surfaces shall be precleaned to rem ove dirt, grease, oil, solder flux, w elding flux, sand, visible rust, scale or oxides and all other contam inants that m ight interfere w ith the adhesion of the surface treatm ent, underplate or final finish. C leaning shall be done im m ediately before the finishing operation. If this is not feasible, suitable precautions shall be taken to insure cleanliness during the period betw een cleaning, plating or other finishing process.
M ultiple cleaning m ethods m ay be required to m axim ize adhesion properties.
3.5.4.1 B
lasting. If an abrasive blasting is necessary to clean near critical areas having a special surface finish requirem ent, such areas m ust be protected from the abrasive. B lasting shall not be used on surfaces w hich m ight be dam aged, i.e. m achine parts and sheet m etal thinner than 1.59 m m
(16 gage).
3.5.4.2 C
leaning of alum inum shelters. A lum inum shelters shall be cleaned in accordance w ith M
IL-C
-43616.
3.5.4.3 C
leaning of w elded sections. B lack iron oxide form ed by w elding operation shall be rem oved by blasting. A ny residual blasting m aterial shall be rem oved and the m etal surface treated w ith a phosphoric acid etch per M
IL-C
-10578. This w ill rem ove and neutralize residual alkaline w eld flux slags.
TL-14072E(C
R
3.5.4.4 U
se of steel w ool. Steel w ool shall not be used under any circum stances to clean alum inum or m agnesium surfaces. R esidual steel particles can becom e entrapped resulting in the form ation of corrosion sites w hich m ay dam age finish integrity and/or the basis m etal. U se of em ery or garnet abrasives on alum inum or m agnesium is preferred.
3.6 Fabricated parts. Parts form
ed or fabricated by m eans of lock seam s, lap joints, or by a m eans other than soldering, brazing, w elding, or die form ing, shall be plated, passivated, or both, prior to form ing and fabricating operations. A s an alternate, the design shall be such that plating, passivating, and/or neutralizing solutions w ill drain from the part. For exam ple, alum inum to be lap-seam ed and riveted should be anodized prior to the riveting operation.
3.7 Potential problem
s to be considered prior to the specification of cadm ium or zinc coatings.
a. C hrom ate-treated zinc-coatings, cadm ium -plated, or zinc-base alloy parts shall not be used w hen such parts m ay be exposed to am bient tem peratures above 71 C w hile in service. This does not apply to baking tem peratures in excess of 71 C w hich m ay be required to cure paint during the finish process. In lieu of cadm ium or zinc coating for item s to be subjected in service to higher tem perature conditions than 71 C
M
IL-P-53022 (softens at about 120 C
) or M
IL-C
-87115, in conjunction w ith a suitable top coat finish as recom m ended in cited specifications prior to final finishing, should be applied. M
IL-P-14105 is a high tem perature paint option w here applicable.
b. U npainted cadm ium
, zinc-plated and zinc-base alloy parts shall not be used in assem blies w here they w ould be in confined unventilated spaces and subject to vapors em anating from phenolic insulating varnishes, phenolic encapsulating com pounds, uncured phenolic m aterials, or air drying alkyd paints (e.g.,; M aster Painter Institute
(M
PI) R
eference #47 and M
IL-D
TL-15090) as severe corrosion problem s are likely to occur.
3.8 U
se of sealants and anti-seize com pounds.
3.8.1 Threaded parts for alum
and m agnesium alloys. Prior to assem bly, all externally threaded parts for use in alum inum and m agnesium alloys shall be coated w ith anti-seize com pound in accordance w ith A
-A -59313. For m agnesium alloys, an equal w eight m ixture of zinc chrom ate pigm ent and petrolatum is also acceptable.
3.8.2 O
penings. To preclude unnecessary finish requirem ents for the interior of equipm ent exposed to Type I environm ental conditions, openings not required for an electronic system
’s operation shall be sealed to prevent fluid entry or direct exposure to exterior environm ent. Sealing around access plates shall be provided in a configuration that w ill allow rem oval of access plates w ithout dam aging the sealant or surrounding etal.
TL-14072E(C
R
3.8.3 Sealing. U
nless otherw ise specified in the end item specification, sealing of the interiors of gear cases or sim ilar com partm ents and reservoirs shall be in accordance w ith the applicable sealant specification. The sealer shall be applied prior to assem bly and shall be capable of w ithstanding im m ersion in lubrication oil, hydraulic fluids, and cutting com pounds for the operating tem peratures and atm ospheric conditions specified for the end item , w ithout w rinkling, blistering, peeling, or loss of adhesion.
3.8.4 Press fits. Press fitting of parts not perm
anently housed in oil or grease shall be accom plished w ith sealing and coating com pound conform ing to M
IL-PR
F-
81733, prim er coating epoxy am ide conform ing to M
IL-PR
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .