19_RFQ_SPMYM4-16-Q-0335.doc

Section SF 30 - BLOCK 14 CONTINUATION PAGE

IMPORTANT INFORMATION

Kimberly Schneider

TEL: 808-473-8000 X5505

E-MAIL: kimberly.schneider@dla.mil

FAX: 808-471-1030

THE DOD AND NAVY REQUIRE PAPERLESS DISTRIBUTION OF PURCHASE ORDERS, CONTRACTS, AND MODIFICATIONS.

PLEASE PROVIDE YOUR E-MAIL:_____________________________________________________

PLEASE PROVIDE THE FOLLOWING INFORMATION SO YOUR COMPANY CAN BE ENTERED INTO OUR COMPUTER SYSTEM

CAGE Code (Commercial & Government Entity No.) _____________

DUNS (Dun & Bradstreet) No. _________________________

SAM (System for Award Management) Yes No (circle one)

TAX ID NO. (TIN) _________________________

The Contractor shall be registered in the SAM database prior to submitting an invoice and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

The SAM registration shall be for the same name and address identified on the contract, with its associated CAGE code and DUNS or DUNS+4.

Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls.

SINGLE AWARD – The Government intends to award a single contract resulting from this solicitation. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specified otherwise in the offer.

THE FOLLOWING INFORMATION MUST BE PROVIDED OR YOUR QUOTE MAY NOT BE ACCEPTED.

Material is required to be delivered within 30 DAYS OR BEST DELIVERY after receipt of order (ARO)

If the required delivery cannot be met, an alternate delivery schedule may be considered. Provide your best delivery schedule:

Estimated delivery time __________________days/months.

Business size (in accordance with Federal Government Standards)

Small ____ Large ____Women-Owned____ Disadvantaged _____ Other_____

Prompt Payment Terms_______% _______Days NET ______

If on GSA Contract: [ ] GSA Contract #____________________Expiration Date: ______

VENDOR SHALL COMPLETE AND RETURN THE FOLLOWING PRICE INFORMATION: PRICES ARE BASED ON (Check one or more)

(1) [ ] Commercial catalog/published price list number _______________ date_________page________. ATTACH APPLICABLE CATALOG/PRICE LIST PAGE.

Note: If quoted prices exceeds catalog/published price, explain

(2) Unpublished or internal Price List No. ______________

State means of verification:

Prices audited and approved by DCAA/DCASR ______________________

Last audit was on ________________________ (date).

(3) Sales history of this item for at least the last 12 months:

Government Commercial Sales dollar Volume:

Quantity of Units Sold:

Vendors are requested to furnish the following Information with their offers: (If Applicable)

UNIT COSTS

1.

Purchase Part

2.

Raw Material

3.

Labor: _______hours, $_______/hour

4.

Manufacturing Overhead_______%

5.

Other Costs (packing, transportation, etc.)

6.

G&A Expense_______

7.

Profit_________%

METHOD OF PAYMENT IS GOVERNMENT PURCHASE CARD:

FAR Clause 52.232-36 is applicable to this solicitation. Please note that the Government wide purchase card will be used as the method of payment for supplies and/or services procured under this solicitation. If you are not able to accept payment by credit card, please provide reason(s) below:

Section SF 1449 - CONTINUATION SHEET

LAPPING MACHINE

FFP

MODEL 20 PORTABLE PRECISION LOOSE ABRASIVE PROCESSING MACHINE OR EQUAL

CONSISTS OF STEEL HOUSING, 1HP, 7ORPM MOTOR, 3 ADJUSTABLE CONDITIONING /RETAINER RING ROLLER BEARING YOKE ASSEMBLIES, ABRASIVE SLURRY DISTRIBUTION SYSTEM, AGITATOR, 1/20HP PUMP MOTOR, 3 FEED FLOW CONTROLS, CYCLE TIMER, STEEL WORKTABLE, 110 VOLT, 60HZ, SINGLE PHASE ELECTRICAL SYSTEM, AND RUN/STOP CONTROLS. INCLUDES: (1) 20" HARDENED STEEL STRAIGHT EDGE, (1) ALLEN WRENCH, (1) 5LBS. LAPMASTER ABRASIVE, (1) GALLON LAPMASTER VEHICLE, (1) OPERATORS MANUAL

**SHIPPING TO BE INCLUDED IN PRICING***

FOB: Destination

MILSTRIP: N3225360474900

MFR PART NR: MODEL 20

PURCHASE REQUEST NUMBER: N3225360474900

PROJECT: NY9

NET AMT

CONTROLLER

LAPMASTER DC CONTROLLER OR EQUAL, VARIABLE SPEED MACHINING PLATE, DRIVE SPEED 0-70 RPM.

FOB: Destination

MILSTRIP: N3225360474901

PURCHASE REQUEST NUMBER: N3225360474901

NET AMT

DISC

1/32" THICK WORKHOLDER DISC. P/N LAP500210000091 OR EQUAL

FOB: Destination

MILSTRIP: N3225360474902

MFR PART NR: LAP500210000091

PURCHASE REQUEST NUMBER: N3225360474902

NET AMT

DISC

1/16" THICK WORKHOLDER DISC. P/N LAP500210000032 OR EQUAL

FOB: Destination

MILSTRIP: N3225360474903

MFR PART NR: LAP500210000032

PURCHASE REQUEST NUMBER: N3225360474903

NET AMT

DISC

3/32" THICK WORKHOLDER DISC. P/N LAP500210000030 OR EQUAL

FOB: Destination

MILSTRIP: N3225360474904

MFR PART NR: LAP500210000030

PURCHASE REQUEST NUMBER: N3225360474904

NET AMT

DISC

1/4" THICK WORKHOLDER DISC, P/N LAP500210000035 OR EQUAL

FOB: Destination

MILSTRIP: N3225360474905

MFR PART NR: LAP500210000035

PURCHASE REQUEST NUMBER: N3225360474905

NET AMT

DISC

3/8" THICK WORKHOLDER DISC, P/N LAP500210000038 OR EQUAL

FOB: Destination

MILSTRIP: N3225360474906

MFR PART NR: LAP500210000038

PURCHASE REQUEST NUMBER: N3225360474906

NET AMT

DISC

1/2" THICK WORKHOLDER DISC, P/N LAP500210000039 OR EQUAL

FOB: Destination

MILSTRIP: N3225360474907

MFR PART NR: LAP500210000039

PURCHASE REQUEST NUMBER: N3225360474907

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

MIKE WATTERS

RECEIVING DEPT, CODE Z0S

667 SAFEGUARD ST, BLDG 167

JBPPH HI 96860-5033

808-473-8000 X-4960

FOB: Destination N32253

N32253

N32253

N32253

N32253

N32253

N32253

N32253

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that—

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

CLAUSES INCORPORATED BY FULL TEXT

GOVERNMENT SURPLUS MATERIAL

(a) Definition.

“Surplus material,” as used in this clause, means new, unused material that was purchased and accepted by the U.S. Government and subsequently sold by the DLA Disposition Services, by Contractors authorized by DLA Disposition Services, or through another Federal Government surplus program. The terms “surplus” and “Government surplus” are used interchangeably in this clause.

(b) The Offeror agrees to complete this clause and provide supporting documentation as necessary to demonstrate that the surplus material being offered was previously owned by the Government and meets solicitation requirements. The Offeror must provide this information and any supporting documentation on or before the date that quotes/offers are due; or within the timeframe specified by the Contracting Officer, if additional documentation is requested after submission of the offer. Failure to provide the requested information and supporting documentation within the timeframe requested may result in rejection of the offer. Unless the solicitation states otherwise, Offerors of surplus material are authorized to open packages, inspect material, and reseal packages. Each time this is done, the Offeror’s authorized representative or inspector must sign the packages where they were resealed and annotate the date of inspection.

(c) With respect to the surplus material being offered, the Offeror represents that:

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes __ No __

The material conforms to the technical requirements cited in the solicitation (e.g., commercial and Government entity (CAGE) code and part number, specification, etc.). Yes __ No __

The material conforms to the revision letter/number, if any is cited. Yes __ No __Unknown __

If no, the revision offered does not affect form, fit, function, or interface. Yes __ No __ Unknown __

The material was manufactured by:

(Name): ____________________________________________________

(Address): ___________________________________________________

(2) The Offeror currently possesses the material. Yes __ No __

If no, the Offeror must attach or forward to the Contracting Officer an explanation as to how the offered quantities will be secured.

If yes, the Offeror purchased the material from a Government selling agency or other source. Yes __

No __

If yes, provide the information below:

Government Selling Agency: ______________________________________

Contract Number: _________ _______________________________________

Contract Date: (Month, Year):_________________________________________

Other Source: ______________________________________________

Address:_____________________________________________

Date Acquired: (Month/Year) _____________________________

(3) The material has been altered or modified.

Yes __

a) If yes, the Offeror must attach or forward to the Contracting Officer a complete description of the alterations or modifications.

(4) The material has been reconditioned.

If yes, (i) the price offered includes the cost of reconditioning /refurbishment.

Yes __ No __; and

(ii) The Offeror must attach or forward to the Contracting Officer a complete description of any work done or to be done, including the components to be replaced and the applicable rebuild standard.

The material contains cure-dated components. Yes __

If yes, the price includes replacement of cure-dated components.

Yes __ No __

(5) The material has data plates attached. Yes __

a) If yes, the Offeror must state below all information contained thereon, or forward a copy or facsimile of the data plate to the Contracting Officer.

(6) The offered material is in its original package.

(If yes, the Offeror has stated below all original markings and data cited on the package; or has attached or forwarded to the Contracting Officer a copy or facsimile of original package markings.)

Contract Number ______________________________________

National Stock Number (NSN)_________________________________________

Commercial and Government Entity (CAGE) Code___________________________

Part number_______________________________________

Other markings/data_________________________________

(7) The Offeror has supplied this same material (National Stock Number) to the Government before. Yes __

If yes, (i) the material being offered is from the same original Government contract number as that provided previously.

No __; and

(ii) State below the Government Agency and contract number under which the material was previously provided:

Agency ______________________________________________

Contract Number________________________________________

(8) The material is manufactured in accordance with a specification or drawing.

If yes, (i) the specification/drawing is in the possession of the Offeror. Yes __ No __; and

(ii) The Offeror has stated the applicable information below, or forwarded a copy or facsimile to the Contracting Officer.

Specification/Drawing Number ___________________________________

Revision (if any) _______________________________________________

Date_________________________________________________________

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes __

If yes, (i) Material has been re-preserved. Yes __ No __;

(ii) Material has been repackaged. Yes __ No __;

(iii) Percentage of material that has been inspected is ______% and/or number of items inspected is _______; and

(iv) A written report was prepared. Yes __ No __

If yes, the Offeror has attached it or forwarded it to the Contracting Officer. Yes__ No__

(d) The Offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

(e) The Offeror has attached or forwarded to the Contracting Officer one of the following, to demonstrate that the material being offered was previously owned by the Government (Offeror check which one applies):

___ For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

___ For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

___ For DLA Disposition Services Recycling Control Point (RCP) term sales, the statement of account or billing document.

___ For property sold under the exchange or sale regulation, conducted by sealed bid, auction or retail methods, a solicitation/invitation for bid and corresponding DLA Disposition Services form 1427.

___ When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number. (This information has already been provided in paragraph (c)(6) of this clause. Yes __ No __.)

___ When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government. Describe and/or attach.

(f) This clause only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer’s overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the provision at 52.217-9002.

(g) Offers of critical safety items must comply with the additional requirements in 52.211-9005.

(h) If requested by the Contracting Officer, the Offeror shall furnish sample units, in the number specified, to the Contracting Officer or to another location specified by the Contracting Officer, within 10 days after the Contracting Officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the Offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the Offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the Offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted insofar as specific performance tests have been made by the Government and the results thereof furnished to the Offeror.

(i) In the event of award, the Contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order, whether or not the Contractor has possession of applicable drawings or specifications, and despite the fact that the Government is unable to conduct in-process inspection. The Contractor’s responsibility to perform is not diminished by compliance with the requirement to demonstrate that the offered material was previously owned by the Government. The material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. The Government has the right to cancel any resulting purchase order or terminate any resulting contract for default if unacceptable material is tendered.

(j) If higher level quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

CONDITIONS FOR EVALUATION AND ACCEPTANCE OF OFFERS FOR CRITICAL SAFETY ITEMS

(a) Definitions.

"Actual manufacturer" means an individual, activity, or organization that performs the physical fabrication processes that produce the deliverable part or other items of supply for the Government. The actual manufacturer must produce the part in-house. The actual manufacturer may or may not be the design control activity.

"Approved source" means a prime Contractor or the actual manufacturer(s) cited in the acquisition identification description (AID). It does not include design control activities with no manufacturing capability.

"Critical safety item" (CSI) means a part, assembly, installation, or production system with one or more critical characteristics that, if not conforming to the design data or quality requirements, would result in an unsafe condition that could cause loss of, or serious damage to, the end item or major components, loss of control, or serious injury or death to personnel.

"Design control activity" means a Contractor or Government activity having responsibility for the design of a given part, and for the preparation and currency of engineering drawings and other technical data for that part. The design control activity may or may not be the actual manufacturer.

"Exact product" and "alternate product" are defined in the provision at Defense Logistics Acquisition Directive (DLAD) clause 52.217-9002, Conditions for Evaluation and Acceptance of Offers for Part Numbered Items.

"Prime Contractor" means a Contractor having responsibility for design control and/or delivery of a system/equipment such as aircraft, engines, ships, tanks, vehicles, guns and missiles, ground communications and electronics systems, and test equipment.

"Rebranding" means remarking, re-labeling, repackaging, or otherwise obscuring the marking of the approved source cited in the AID (i.e., the prime Contractor or actual manufacturer).

(b) The item being acquired is a critical safety item (CSI). Given their vital importance and the catastrophic consequences that can result if they fail, procurement of these items requires the highest standards of oversight and verification.

(c) This clause applies only to offers of "exact product." Offers of "alternate product" will be evaluated in accordance with the clause at DLAD 52.217-9002. Offerors of Government surplus material must comply with the requirements in the clause at DLAD 52.211-9000 in addition to this clause, and surplus offers will be evaluated in accordance with the provision at DLAD 52.211-9003.

(d) If the Offeror is the prospective awardee and is not currently an approved source cited in the acquisition identification description (AID) on the schedule page of this solicitation, the Offeror will be requested by the Contracting Officer to provide documented evidence prior to award sufficient to establish that the item being offered is (or will be) the exact item cited in the AID and is (or will be) manufactured by an approved source cited in the AID, modified (if necessary) to conform to any additional requirements set forth in the AID, and is (or will be) manufactured by or under the direction of an approved source cited in the AID. Additionally, if the Offeror manufactures the offered item for an approved source cited in the AID, evidence of approval and acceptance by the approved source will be required. Evidence must include the following at a minimum, plus whatever additional evidence the Contracting Officer determines necessary to sufficiently establish the identity of the item and its manufacturing source:

(1) If offered item(s) are "not in stock" or "not yet manufactured" --

(i) A copy of Offeror's Request for Quotation to approved source cited in AID; and

(ii) An original, hard copy of quotation received by Offeror from approved source cited in AID; or other verifiable documentation of quotation. (If Offeror is unable to provide this documentation to the Contracting Officer prior to award, it must be provided to the Quality Assurance Representative (QAR) for examination at time of source inspection.)

(iii) For offers of surplus material, a completed 52.211-9000 with supporting documentation.

(2) If offered item(s) are "shipped" or "in stock" --

(i) A copy of invoice on approved source's letterhead. (Invoice must identify exact item cited in AID and a quantity sufficient to satisfy the solicitation requirement.); or

(ii) A copy of packing slip which accompanied shipment from approved source to Offeror. (Packing slip must identify exact item cited in AID and a quantity sufficient to satisfy the solicitation requirement; or

(iii) For offers of surplus material, a completed 52.211-9000 with supporting documentation; and

(iv) Inventory control records to establish that items Offeror proposes to furnish under current order are still in Offeror's stock. (This documentation is mandatory and must be provided to Quality Assurance Representative (QAR) for examination at time of source inspection. Documentation may be provided to Contracting Officer prior to award, at Offeror's discretion.)

(3) If the offeror is an authorized dealer/distributor, or manufactures the item for an approved source --

(i) An authorized dealer/distributorship agreement, licensee agreement, or other type of agreement. (The agreement must specifically identify the exact item, or otherwise ensure that the Offeror is authorized by the approved source to manufacture or distribute the exact item being acquired. If the agreement covers a general product line or is otherwise not product-specific, the Offeror must also furnish additional documentation to address the exact item being acquired (see above).); or

(ii) Letter from an approved source cited in the AID, specifically identifying Offeror as authorized to distribute or manufacture the exact item cited in the AID for that approved source; or

(iii) Other verifiable information (e.g., listing of authorized dealers on official Web page of an approved source) to establish the Offeror's authority to manufacturer or distribute the exact item cited in the AID for an approved source cited in the AID.

(4) When the AID specifies a revision number --

(i) Documentation establishing that the offered item was (or will be) made in accordance with the revision cited in the AID. (This requirement is considered to have been met when documentation provided by Offeror to satisfy other portions of this clause or solicitation already establishes that offered item was (or will be) made to the revision cited in the AID); or

(ii) Documentation identifying the revision offered and the differences between the revision offered and the revision cited in the AID.

(e) By the submission of this offer, the Offeror represents that --

(1) The item(s) to be provided to the Government --

(i) Is (or will be) in full compliance with all requirements specified in the solicitation; and

(ii) Is not (or will not be) --

(A) A factory second;

(B) Changed, mutilated, or rebranded;

(C) A manufacturer's overrun;

(D) A rejected item; or

(E) Government surplus material (unless Offeror has complied with clause at DLAD 52.211-9000, Government Surplus Material).

(2) In the event of item failure, Offeror will have access to, and will provide to the Government upon request, all information necessary to trace the item back through the manufacturing process.

(3) Any documentation provided by Offeror will correspond to the exact item(s) that will be furnished to the Government; or Offeror will obtain updated documentation and provide it to the Government (if, for example, Offeror sells item(s) to another Buyer before award or before tender for acceptance).

(f) Failure to provide adequate documentation within the timeframe requested by the Contracting Officer may result in rejection of the offer.

(End of Clause)

CHANGES IN CONTRACTOR STATUS, ITEM ACQUIRED, AND/OR MANUFACTURING PROCESS/FACILITY -- CRITICAL SAFETY ITEMS

(a) If any changes occur in the Contractor’s business status or relationship with the approved source(s) after award of this contract (such as, for example, inability to obtain manufacturing process information; or changes in status as authorized dealer/distributor, or in terms of licensing arrangement), the Contractor shall immediately provide notification and documentation of the changes to the Administrative Contracting Officer (ACO).

(b) The Contractor shall immediately provide to the Administrative Contracting Officer (ACO) notification (and documentation, if available) of any of the following changes the Contractor becomes aware of:

(1) Later revisions to drawings, specifications or standards that differ from the revision cited in the acquisition identification description (AID) in the contract;

(2) Changes in the manufacturing process;

(3) A change in the approved source’s manufacturing location; or

(4) A transfer of manufacturing facilities by the approved source since last manufacture.

(End of Clause)

BUSINESS SYSTEMS MODERNIZATION (BSM) DELIVERY TERMS AND EVALUATION

(a) This acquisition is being conducted under business systems modernization (BSM). Quotes/offers in response to this solicitation will be evaluated as specified in the solicitation.

(b) Delivery shall be quoted/offered in terms of a number of days after date of order (ADO). The number of delivery days requested in this solicitation is calculated based on the Government’s planned need and customer requirements. Unless delivery is identified elsewhere in the solicitation as an evaluation factor, Quoters/Offerors are encouraged to conform their delivery terms as closely as possible to the delivery days requested. If delivery is not identified as an evaluation factor, there will be no evaluation preference, or penalty, for quotes/offers of fewer delivery days than the number of delivery days requested by the Government. Quoting/offering a greater number of delivery days than requested may result in the quote/offer not being considered

(End of Provision)

CONTRACTOR RETENTION OF TRACEABILITY DOCUMENTATION

(a) This clause applies whenever the Contractor is not the manufacturer of the item(s) to be furnished.

(b)(1) The Contractor shall retain evidence to document that items furnished under this contract conform to contract requirements. Evidence will generally include information tracing the items back to the manufacturing source or its authorized distributor. At a minimum, evidence shall be sufficient to establish the identity of the item, its manufacturing source, and conformance to the item description.

(2) Examples of traceability documentation include, but are not limited to, the following:

(i) Purchase order(s)/invoice(s) between manufacturer(s)/distributor(s), identifying part number (and/or technical data package (TDP) with revision level) and quantities;

(ii) Original equipment manufacturer (OEM) or approved/qualified source’s packing slips, identifying part number (and/or TDP with revision level) and quantities;

(iii) OEM or approved/qualified source’s certification, identifying part number (and/or TDP with revision level) and quantities; and/or

(iv) OEM or approved/qualified source’s identifiable standard packaging, with part number (and/or TDP with revision level) cited on the package.

(3) The Contractor shall be responsible for the assurance of type, kind, count, and condition. Preservation, packing, packaging, and marking shall be in accordance with contractual requirements.

(4) The Contractor shall provide documentation of traceability for review—

(i) Upon request by the Contracting Officer at any time prior to or after award;

(ii) At time of Government source inspection, if applicable; and/or

(iii) During random or directed post-award audits.

(5) The Contractor shall retain documentation in accordance with this clause for 5 years after final payment under this contract.

c) The Offeror/Contractor shall provide documentation of traceability for review—

(1) Upon request by the Contracting Officer at any time prior to or after award;

(2) At time of Government source inspection, if applicable; and/or

(3) During random or directed post-award audits.

(d) Traceability documentation shall, at a minimum, include the following:

(1) If the Offeror/Contractor is an authorized dealer/distributor for an approved source for the specific item being procured by the Government, the following requirements apply:

(i) The Offeror/Contractor shall maintain at least one of the following:

(A) A copy of its current dealer/distributorship agreement;

(B) A letter of authorization from the approved source; or

(C) A link to an official website maintained by the approved source, which shall clearly identify the Offeror as an authorized dealer/distributor.

(ii) By submission of documentation described in subparagraph (d)(1)(i) of this clause, the Offeror/Contractor represents that:

(A) The dealer/distributor relationship with the approved source applies to the specific item being procured by the Government; and

(B) If the Contractor’s dealer/distributor status with the approved source changes after award, the Contractor shall promptly notify the Contracting Officer. Failure to provide such notification is grounds for cancellation of award or termination for default/cause, as applicable.

(2) If the Offeror/Contractor is not an authorized dealer/distributor for an approved source for the specific item being procured by the Government, the following requirements apply:

(i) If the Offeror/Contractor identified the offered item as “not in stock/not currently owned by the Offeror" or "not yet manufactured," the Offeror/Contractor shall—

(A) Maintain a verifiable quotation from the approved source, or from an authorized dealer/distributor for the approved source.

(B) Include the following information in its quotation:

(1) The item part number or designation, which shall be provided in sufficient detail to document that the item being quoted is the same as the item being procured by the Government;

(2) The quantity, which shall be sufficient to satisfy the solicitation requirement;

(3) The unit price quoted by the approved source, or by the authorized dealer/distributor for the approved source;

(4) The date of the quotation; and

(5) The name and phone number of the representative of the approved source, or of the authorized dealer/distributor for the approved source.

(C) The quotation shall be on the letterhead of the approved source, or of an authorized dealer/distributor for the approved source; or an electronic quotation, which shall be clearly identifiable as coming to the Offeror/Contractor from the approved source, or from an authorized dealer/distributor for the approved source.

(D) If the offered items are obtained from an authorized dealer/distributor for the approved source, the Offeror/Contractor shall maintain the information described in subparagraph (d)(1)(i) of this clause to document the authorized dealer/distributor arrangement; and the terms in subparagraph (d)(1)(ii) of this clause shall apply.

(ii) If the Offeror/Contractor identified the offered item as “shipped” or “in stock/currently owned by the Offeror,” the following requirements apply:

(A) The Offeror/Contractor shall maintain one of the following documents:

(1) The invoice received by the Offeror/Contractor from the approved source, or from an authorized dealer/distributor for the approved source; or

(2) The packing slip that accompanied the shipment to the Offeror/ Contractor from the approved source, or from an authorized dealer/distributor for the approved source. The packing slip shall include a packing slip number. (If no packing slip number was provided, the Offeror/Contractor shall obtain and maintain written documentation from the approved source, or from the authorized dealer/distributor for the approved source, verifying the packing slip number. Such documentation shall include the name and address of the approved source, or of the authorized dealer/distributor for the approved source; the date of the correspondence; and the name and phone number of the representative of the approved source, or of the authorized dealer/distributor for the approved source, who provided the information.)

(B) The documentation furnished in accordance with subparagraph (c)(2)(ii)(A) of this clause shall include the following:

(1) Date;

(2) the name and address of the approved source, or of the authorized dealer/distributor for the approved source;

(3) the name and phone number of the representative of the approved source, or of the authorized dealer/distributor for the approved source;

(4) the item part number or designation, which shall be provided in sufficient detail to document that the item provided to the Contractor is the same as the item being procured by the Government;

(5) the quantity, which shall be sufficient to satisfy the solicitation requirement;

(6) the unit price charged by the approved source, or by the authorized dealer/distributor for the approved source; and

(7) the Offeror’s/Contractor’s name and address.

(C) If the offered items are obtained directly from an authorized dealer or distributor, the Offeror/Contractor shall maintain the information described in subparagraph (d)(1)(i) of this clause to document the authorized dealer/distributor arrangement; and the terms in subparagraph (d)(1)(ii) of this clause shall apply.

(3) If the offered items are not obtained directly from an approved source, or from an authorized dealer/distributor of an approved source, the Offeror/Contractor shall maintain documentation, as described in subparagraph (d)(2) of this clause, sufficient to establish the complete line of ownership or distribution from the approved source, or from an authorized dealer/distributor for the approved source, to the Offeror/Contractor.

(e) The Contracting Officer determines the acceptability and sufficiency of documentation or other evidence, at his or her sole discretion. If the Contracting Officer finds the evidence to be unacceptable, or if the Contractor fails to retain or provide the requested evidence, the award may be cancelled or contract may be terminated for cause/default, as applicable.

(f) At the Contracting Officer’s discretion, documentation of traceability provided by the Contractor, in accordance with provisions in the solicitation and/or clauses included in this contract, may be used to determine the acceptability of documentation retained in accordance with this clause.

(g) Notwithstanding any documentation provided by the Offeror prior to purchase order issuance/contract award, the Government reserves the right to require additional documentation attesting to the authenticity of the material at any time before or after contract delivery.

(h) If the solicitation states inspection and acceptance shall take place at destination, the Government reserves the right to change the place of inspection and acceptance to origin and to invoke 52.246-9004, Product Verification Testing, at time of award, with no increase in the awarded unit price.

(i) The Contractor shall be responsible for the assurance of type, kind, count, and condition. Preservation, packing, packaging, and marking shall be in accordance with contractual requirements.

(j) The Contractor shall retain documentation in accordance with this clause for 5 years after final payment under this contract.

(End of Clause)

SUBSTITUTION OF ITEM AFTER AWARD

When the purchase order text (POT) identifies supplies by manufacturer's name, commercial and Government Entity (CAGE) code , and part number, the specified item(s) are the only item(s) acceptable under this contract. The Contractor may not substitute a different item after award.

(End of Clause)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) Price

(ii) Technically Acceptable

(iii) Delivery

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2015) ALTERNATE I (OCT 2014)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision.

(a) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“W…