26Q2007 Exhibit B.pdf

PDF 63 KB Posted

Attached to
Hardware (Fasteners) Federal contract opportunity
Solicitation number
SPMYM326Q2007
Issued by
Defense Logistics Agency Land and Maritime

About this file

This document is a DD Form 1423 Contract Data Requirements List (CDRL) for SLF-LKG Capscrews with contract number 5294-4001-2. The CDRL outlines two specific data items to be submitted by the contractor:

  1. B001: Certification of Quality/Certificate of Compliance - Requires a one-time submission of technical content related to the contract line items, to be submitted with material. 2. B002: Chemical & Mechanical Certification Data/Report - Requires a one-time submission of quantitative test results for chemical and mechanical tests, including evidence of testing correct specimen numbers. Both data items must be submitted under separate shipment numbers and are associated with contract sections C.2 and C.3, respectively. The document is prepared by Chris Brown and approved by Edward Walsh on 10/24/2025, with the requiring office coded as 245.

View the file

Other files for this federal contract opportunity

Other files attached to Hardware (Fasteners), newest first.
File Type Posted
SPMYM326Q2007 Combined Synopsis Solicitation.docx DOCX document
26Q2007 Exhibit C.pdf PDF
SPMYM326Q2007 RFQ.docx DOCX document
Security Agreement For NNPI.docx DOCX document
26Q2007 Exhibit A.pdf PDF
Clauses - Full Text Provisions and Clauses.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DD FORM 1423 ATTACHED

CONTRACT DATA REQUIREMENTS LIST

245.2B-2011-25 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. C. CATEGORY

TDP X TM OTHER

D. SYSTEM/ITEM

B. EXHIBIT

B

E. CONTRACT/PR NO. F. CONTRACTOR

SLF-LKG CAPSCREWS 5294-4001-2

1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE

B001

CERTIFICATION OF QUALITY

CERTIFICATE OF COMPLIANCE COMPLIANCE

4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

DI-MISC-81356A SECTION C.2 CODE 245

7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION

STATEMENT SUBMISSION

a. ADDRESSEE b. COPIES

REQUIRED

DD With Material DRAFT FINAL One Time

A

8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO

SUBSEQUENT 133.2 0 1 0

N/A N/A

SUBMISSION

N/A

16 REMARKS 0 0 0

1. Technical content as described in the respective contract line item{s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 &

15. TOTAL 0 1 0

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE

B0 02

CHEMICAL & MECHANICAL CERTIFICATION

CERTIFICATION DATA/ REPORT

4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

DI-MISC-80678 SECTION C.3 CODE245

7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION

STATEMENT SUBMISSION

a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL

A

8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO

SUBSEQUENT

SUBMISSION

133.2 0 1 0 N/A N/A

N/A

16 REMARKS

1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0

2. Technical content as described in the respective contract line item{s).

3. This certification shall contain the actual Test results of all Chemical 15. TOTAL 0 1 0

& Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.

G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE

CHRIS BROWN Ext: 2961 10/22/2 025 10/24/2025

10/24/25 245.2B

X EDWARD WALSH

Signed by:W ALSH .EDW ARD .M .1411048035

File details come from the government source that posted it. Updated .