SPMYM325Q2016 Exhibits.pdf
PDF 542 KB Posted
- Attached to
- Assorted Hardware (Capscrews) Federal contract opportunity
- Solicitation number
- SPMYM325Q2016
About this file
This file contains multiple Contract Data Requirements Lists (CDRLs) for hardware items including socket flat countersunk head cap screws and hex head self-locking cap screws. The CDRLs specify two key certification requirements that must be submitted with the material: 1) Certification of Quality Compliance (Certificate of Compliance) under DI-MISC-81356A and 2) Chemical & Mechanical Certification Data/Report under DI-MISC-80678.
The certification requirements mandate that test results must be quantitative and meet specification units, with fastener certification showing evidence of testing the correct number of specimens. New untested fasteners are required for wedge tensile and yield strength testing. Each data item must be submitted under a separate shipment number. The requirements are approved by Jason Laflamme and prepared by Conrad Gagne, with submission dates in January 2025. The procuring agency is Defense Logistics Agency Land and Maritime, with Code 245 as the requiring office.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM325Q2016 Combined Synopsis Solicitation.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses 241128.docx | DOCX document | |
| SPMYM325Q2016 RFQ.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-0332-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
B
E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD 43304001-2
CAP SCREW ANGLE
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
B001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
B002 CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/17/2025
CONRAD GAGNE Ext: 6797 11/26/2024 X 01/17/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .12S5776556
245.2C-0472-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. C. CATEGORY
TOP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
C
E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD SLF LKG CAP SCREW 43584001-7
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
C001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232·
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
C002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C.3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
SUBMISSION 133.2 0 1 0 N/A
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/16/2025
CONRAD GAGNE Ext: 6797 12/24/2024 X 01/16/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776556
A. CONTRACT LINE ITEM NO. C. CATEGORY
TOP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
D
E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD SLF LKG CAP SCREW 43584001-7
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
D001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232·
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
D002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C.3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
SUBMISSION 133.2 0 1 0 N/A
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/16/2025
CONRAD GAGNE Ext: 6797 12/24/2024 X 01/16/2025
A. CONTRACT LINE ITEM NO. C. CATEGORY
TOP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
E
E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD SLF LKG CAP SCREW 43584001-7
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
E001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232·
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
E002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C.3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
SUBMISSION 133.2 0 1 0 N/A
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/16/2025
CONRAD GAGNE Ext: 6797 12/24/2024 X 01/16/2025
A. CONTRACT LINE ITEM NO. C. CATEGORY
TOP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
F
E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD SLF LKG CAP SCREW 43584001-7
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
F001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232·
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
F002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C.3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
SUBMISSION 133.2 0 1 0 N/A
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/16/2025
CONRAD GAGNE Ext: 6797 12/24/2024 X 01/16/2025
A. CONTRACT LINE ITEM NO. C. CATEGORY
TOP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
G
E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD SLF LKG CAP SCREW 43584001-7
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
G001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232·
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
G002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C.3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
SUBMISSION 133.2 0 1 0 N/A
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/16/2025
CONRAD GAGNE Ext: 6797 12/24/2024 X 01/16/2025
A. CONTRACT LINE ITEM NO. C. CATEGORY
TOP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
H
E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD SLF LKG CAP SCREW 43584001-7
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
H001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232·
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
H002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C.3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
SUBMISSION 133.2 0 1 0 N/A
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/16/2025
CONRAD GAGNE Ext: 6797 12/24/2024 X 01/16/2025
A. CONTRACT LINE ITEM NO. C. CATEGORY
TOP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
J
E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD SLF LKG CAP SCREW 43584001-7
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
J001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232·
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
J002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C.3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
SUBMISSION 133.2 0 1 0 N/A
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/16/2025
CONRAD GAGNE Ext: 6797 12/24/2024 X 01/16/2025
| Q2016 Exhibit A |
| Q2016 Exhibit B |
| Q2016 Exhibit C |
| Q2016 Exhibit D |
| Q2016 Exhibit E |
| Q2016 Exhibit F |
| Q2016 Exhibit G |
| Q2016 Exhibit H |
| Q2016 Exhibit J |
File details come from the government source that posted it. Updated .