Combined Synopsis Solicitation SPMYM324Q9017.pdf

SPMYM324Q9017

JMLs: 33484041-4045, 33534001-4002, 33534031-4035, 33544001-4004, 33614012

Cap Screws

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at FAR 13, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to BETASAM. The RFQ number is SPMYM324Q9017. This solicitation documents and incorporates provisions and clauses in effect through FAC 2024-02 January 22, 2024, and DFARS Publication Notice 20231222. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.ecfr.gov. The FSC Code is 5305 and the NAICS code is 332722. This requirement is being processed utilizing a 100% Small Business Set-Aside. The Small Business Standard is 600.

Solicitation closes on Thursday, February 15, 2024, at 12:00pm est.

Evaluation criteria is Lowest Price Technically Acceptable (LPTA) and “All or None”. If no offers are received which meet or exceed the Government’s RDD provided below, award may proceed to the LPTA offeror, and may be made based on soonest delivery. PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.

Government RDD: 09/15/2024

Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable. Place of Manufacture / Country of Origin Required.

Quotes must be e-mailed to tasha.dooley@dla.mil and also DLA-KME-

QUOTATIONS@DLA.MIL

Your Company Info:

Phone:

Email:

Cage Code:

**Note: Vendor shall list the country of origin for each line item https://www.ecfr.gov/ mailto:tasha.dooley@dla.mil mailto:DLA-KME-QUOTATIONS@DLA.MIL mailto:DLA-KME-QUOTATIONS@DLA.MIL

SHIP TO:

Portsmouth Naval Shipyard Receiving Officer

BLDG 170

Kittery, ME 03904

The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:

ITEM DESCRIPTION QTY U/I Unit Price Total Price

CLIN 0001: Socket Flat Countersunk Head 28 EA ________ _________

Cap Screw Angle

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.750-10UNRC-3A X 2.500 IN. LG.

MFR IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN

ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X NOT TABLVIII.

ALSO NOTE THAT PARA 3.5.6 OF FF-S-86H IS IN ERROR AND THAT MATERIAL

MARKINGS ON THE HEAD OF THE FASTENERS TO BE “•K•” NOT JUST K. MAT’L IS

NICUAL ALLOY, QQ-N-286G.

CLIN 0002: Data Requirements for CLIN 0001 1 EA __NSP____ _NSP____

See Exhibit A SEQ A001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0003: Data Requirements for CLIN 0001 1 EA __NSP____ _NSP____

See Exhibit A SEQ A002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0004: Socket Flat Countersunk Head 33 EA ________ _________

Cap Screw Angle

SAME AS CLIN 0001.

CLIN 0005: Data Requirements for CLIN 0004 1 EA __NSP____ _NSP____

See Exhibit B SEQ B001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0006: Data Requirements for CLIN 0004 1 EA __NSP____ _NSP____

See Exhibit B SEQ B002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0007: Socket Flat Countersunk Head 28 EA ________ _________

Cap Screw Angle

SAME AS CLIN 0001.

CLIN 0008: Data Requirements for CLIN 0007 1 EA __NSP____ _NSP____

See Exhibit C SEQ C001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0009: Data Requirements for CLIN 0007 1 EA __NSP____ _NSP____

See Exhibit C SEQ C002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0010: Socket Flat Countersunk Head 24 EA ________ _________

Cap Screw Angle

SAME AS CLIN 0001.

CLIN 0011: Data Requirements for CLIN 0010 1 EA __NSP____ _NSP____

See Exhibit D SEQ D001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0012: Data Requirements for CLIN 0010 1 EA __NSP____ _NSP____

See Exhibit D SEQ D002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0013: Socket Flat Countersunk Head 26 EA ________ _________

Cap Screw Angle

SAME AS CLIN 0001.

CLIN 0014: Data Requirements for CLIN 0013 1 EA __NSP____ _NSP____

See Exhibit E SEQ E001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0015: Data Requirements for CLIN 0013 1 EA __NSP____ _NSP____

See Exhibit E SEQ E002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0016: Hex Head SLF LKG Capscrew 10 EA ________ _________

HEX HEAD SELF-LOCKING CAP SCREW, 3/4-10UNC-2A X 2 IN LONG. MFR IAW MIL-DTL-

1222J TY-I. MATERIAL IS CORROSION RESISTENT STEEL GRADE 316. SELF-LOCKING IAW

MIL-DTL-18240F AMEND 1 TYPE ANY. MARKINGS OF A MINIMUM SIX (6) DOTS (APPROX.

.032 DIA.) RAISED OR DEPRESSED (APPROX. .010) SHALL BE PLACED ON THE HEAD OF

THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY).

CLIN 0017: Data Requirements for CLIN 0016 1 EA __NSP____ _NSP____

See Exhibit F SEQ F001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0018: Data Requirements for CLIN 0016 1 EA __NSP____ _NSP____

See Exhibit F SEQ F002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0019: Hex Head Capscrew 4 EA ________ _________

HEX HEAD CAP SCREW, 1/2-13UNC-2A X 2 IN LONG. MFR IAW MIL-DTL-1222J TY-I.

MATERIAL IS ALLOY STEEL B-7, NO COATING.

CLIN 0020: Data Requirements for CLIN 0019 1 EA __NSP____ _NSP____

See Exhibit G SEQ G001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0021: Data Requirements for CLIN 0019 1 EA __NSP____ _NSP____

See Exhibit G SEQ G002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0022: Socket Head Capscrew 510 EA ________ _________

SOCKET HEAD CAP SCREW, 0.750-10UNRC-3A X 2.750 IN. LG. MFR IAW FF-S-86H TYPE VI.

NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. ALSO NOTE THAT

PARA 3.5.6 OF FF-S-86H IS IN ERROR AND THAT MATERIAL MARKINGS ON THE HEAD

OF THE FASTENERS TO BE “•K•” NOT JUST K. MAT’L IS NICUAL ALLOY, QQ-N-286G.

CLIN 0023: Data Requirements for CLIN 0022 1 EA __NSP____ _NSP____

See Exhibit H SEQ H001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0024: Data Requirements for CLIN 0022 1 EA __NSP____ _NSP____

See Exhibit H SEQ H002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0025: Socket Head Capscrew 145 EA ________ _________

SOCKET HEAD CAP SCREW, 0.750-10UNRC-3A X 3.750 IN. LG. MFR IAW FF-S-86H TYPE VI.

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. ALSO NOTE THAT

PARA 3.5.6 OF FF-S-86H IS IN ERROR AND THAT MATERIAL MARKINGS ON THE HEAD

OF THE FASTENERS TO BE “•K•” NOT JUST K. MAT’L IS NICUAL ALLOY, QQ-N-286G.

CLIN 0026: Data Requirements for CLIN 0025 1 EA __NSP____ _NSP____

See Exhibit J SEQ J001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0027: Data Requirements for CLIN 0025 1 EA __NSP____ _NSP____

See Exhibit J SEQ J002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0028: Socket Head Capscrew 360 EA ________ _________

SOCKET HEAD CAP SCREW, 0.500-13UNRC-3A X 3.000 IN. LG. MFR IAW FF-S-86H TYPE VI.

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. ALSO NOTE THAT

PARA 3.5.6 OF FF-S-86H IS IN ERROR AND THAT MATERIAL MARKINGS ON THE HEAD

OF THE FASTENERS TO BE “•K•” NOT JUST K. MAT’L IS NICUAL ALLOY, QQ-N-286G.

CLIN 0029: Data Requirements for CLIN 0028 1 EA __NSP____ _NSP____

See Exhibit K SEQ K001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0030: Data Requirements for CLIN 0028 1 EA __NSP____ _NSP____

See Exhibit K SEQ K002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0031: Socket Head Capscrew 37 EA ________ _________

SOCKET HEAD CAP SCREW, 0.500-13UNRC-3A X 2.250 IN. LG. MFR IAW FF-S-86H TYPE VI.

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. ALSO NOTE THAT

PARA 3.5.6 OF FF-S-86H IS IN ERROR AND THAT MATERIAL MARKINGS ON THE HEAD

OF THE FASTENERS TO BE “•K•” NOT JUST K. MAT’L IS NICUAL ALLOY, QQ-N-286G.

CLIN 0032: Data Requirements for CLIN 0031 1 EA __NSP____ _NSP____

See Exhibit L SEQ L001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0033: Data Requirements for CLIN 0031 1 EA __NSP____ _NSP____

See Exhibit L SEQ L002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0034: Socket Head Capscrew 37 EA ________ _________

SOCKET HEAD CAP SCREW, 0.500-13UNRC-3A X 3.250 IN. LG. MFR IAW FF-S-86H TYPE VI.

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. ALSO NOTE THAT

PARA 3.5.6 OF FF-S-86H IS IN ERROR AND THAT MATERIAL MARKINGS ON THE HEAD

OF THE FASTENERS TO BE “•K•” NOT JUST K. MAT’L IS NICUAL ALLOY, QQ-N-286G.

CLIN 0035: Data Requirements for CLIN 0034 1 EA __NSP____ _NSP____

See Exhibit M SEQ M001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0036: Data Requirements for CLIN 0034 1 EA __NSP____ _NSP____

See Exhibit M SEQ M002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0037: Socket Flat Countersunk Head 70 EA ________ _________

Cap Screw Angle

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.500-13UNRC-3A X 3.750 IN. LG.

MFR IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN

ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X NOT TABLVIII.

ALSO NOTE THAT PARA 3.5.6 OF FF-S-86H IS IN ERROR AND THAT MATERIAL

MARKINGS ON THE HEAD OF THE FASTENERS TO BE “•K•” NOT JUST K. MAT’L IS

NICUAL ALLOY, QQ-N-286G.

CLIN 0038: Data Requirements for CLIN 0037 1 EA __NSP____ _NSP____

See Exhibit N SEQ N001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0039: Data Requirements for CLIN 0037 1 EA __NSP____ _NSP____

See Exhibit N SEQ N002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0040: Socket Flat Countersunk Head 50 EA ________ _________

Cap Screw Angle

SAME AS CLIN 0037.

CLIN 0041: Data Requirements for CLIN 0040 1 EA __NSP____ _NSP____

See Exhibit O SEQ O001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0042: Data Requirements for CLIN 0040 1 EA __NSP____ _NSP____

See Exhibit O SEQ O002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0043: Socket Flat Countersunk Head 9 EA ________ _________

Cap Screw Angle

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.500-13UNRC-3A X 2.750 IN. LG.

MFR IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN

ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X NOT TABLVIII.

ALSO NOTE THAT PARA 3.5.6 OF FF-S-86H IS IN ERROR AND THAT MATERIAL

MARKINGS ON THE HEAD OF THE FASTENERS TO BE “•K•” NOT JUST K. MAT’L IS

NICUAL ALLOY, QQ-N-286G.

CLIN 0044: Data Requirements for CLIN 0043 1 EA __NSP____ _NSP____

See Exhibit P SEQ P001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0045: Data Requirements for CLIN 0043 1 EA __NSP____ _NSP____

See Exhibit P SEQ P002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0046: Socket Flat Countersunk Head 9 EA ________ _________

Cap Screw Angle

SAME AS CLIN 0043.

CLIN 0047: Data Requirements for CLIN 0046 1 EA __NSP____ _NSP____

See Exhibit Q SEQ Q001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0048: Data Requirements for CLIN 0046 1 EA __NSP____ _NSP____

See Exhibit Q SEQ Q002: CDRL DI-MISC-80678 (Certification/Data Reports).

CLIN 0049: Hex Head SLF LKG Capscrew 2 EA ________ _________

HEX HEAD SELF-LOCKING CAP SCREWS, 0.750-16UNF-2A X 2.500 IN LONG. IAW ASTM

F593-22 CRES GROUP-1. MAKE SELF-LOCKING IAW MIL-DTL-18240F(1) TYPE- “ANY”.

MARKINGS OF A MINIMUM SIX (6) DOTS (APPROX. 0.032 DIA.) RAISED OR DEPRESSED

(APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED,

SIDE LOCATION IF NECESSARY).

CLIN 0050: Data Requirements for CLIN 0049 1 EA __NSP____ _NSP____

See Exhibit R SEQ R001: CDRL DI-MISC-81356A (Certificate of Compliance).

CLIN 0051: Data Requirements for CLIN 0049 1 EA __NSP____ _NSP____

See Exhibit R SEQ R002: CDRL DI-MISC-80678 (Certification/Data Reports).

If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.

NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24,

52.204-25, 52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE

COMPLETED PROVISIONS WITH THEIR OFFER.

A small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB Program; or

(E) Historically underutilized business zone small business.

FAR CLAUSES AND PROVISIONS

52.204-7, System for Award Maintenance 52.204-9, Personal Identity Verification of Contractor Personnel 52.204-13, SAM Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications 52.204-24* See Attachment for this provision

52.204-26* See Attachment for this provision 52.204-29 FASCSA Representation* See Attachment for this provision 52.211-14, Notice of Priority Rating 52.211-15, Defense Priority And Allocation Requirements 52.211-17, Delivery of Excess Quantities 52.212-1, Instructions to Offerors - Commercial Items;

52.212-3, Offeror Reps and Certs 52.212-4, Contract Terms and Conditions – Commercial Items 52.219-1, Alt 1 Small Business Program Representations 52.222-22, Previous Contracts & Compliance Reports 52.222-25, Affirmative Action Compliance 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs 52.232-39, Unenforceability of Unauthorized Obligations 52.233-2 Service of Protest 52.242-13 Bankruptcy 52.242-15 Stop Work Order 52.243-1, Changes Fixed Price 52.246-1, Contractor Inspection Requirements 52.247-34, F.O.B-Destination 52.252-1 Solicitation Provisions Incorporated by Reference 52.252-2 Clauses Incorporated by Reference 52.253-1, Computer Generated Forms

52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement:

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations

52.232-40, Providing Accelerated Payments to Small Business Subcontractors

52.233-3, Protest After Award

52.233-4, Applicable Law for Breach of Contract Claim

52.204-10 Reporting Executive Compensation 52.204-27 Prohibition on a ByteDance Covered Application 52.204-30 FASCSA Federal Acquisition Supply Chain Security Act

Orders-Prohibition 52.209-6 Protecting the Government's Interest 52.219-6 Notice of Total Small Business Set-Aside 52.219-28 Post-Award Small Business Program Representation 52.222-3 Convict Labor 52.222-19 Child Labor 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-36 Equal Opportunity for Workers with Disabilities 52.222-50 Combating Trafficking in Persons 52.223-11 Ozone Depleting Substances 52.223-18 Encouraging Contractors to Ban Text Messaging While Driving 52.225-3 Buy American-Free Trade Agreements 52.225-13 Restriction on Certain Foreign Purchases 52.232-33 Payment by EFT-SAM

DFARS CLAUSES AND PROVISIONS

252.203-7000, Requirements Relating to Compensation of Former DoD Officials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7003, Control of Government Personnel Work Product 252.204-7004, System for Award Management 252.204-7008, Compliance With Safeguarding Covered Defense Information Controls 252.204-7012, Safeguarding of Unclassified Controlled Technical Information Deviation 2016 O0001) 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.204-7016, * See Attachment for this provision.

252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

252.204-7019, *See Attachment for this provision.

252.204-7020, NIST SP 800-171 DoD Assessment Requirements 252.204-7024 Notice on the Use of the Supplier Performance Risk System 252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability 252.211-7003, Item Unique Identification and Valuation 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.

252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7008, Prohibition of Hexavalent Chromium 252.225-7001 Buy American and Balance of Payments 252.225-7002 Qualifying Country Sources as Subcontractors 252.225-7048, Export Controlled Items 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.231-7000, Supplemental Cost Principles.

252.232-7006, Wide Area Workflow Payment Instructions 252.232-7010, Levies on Contract Payments 252.243-7001, Pricing of Contract Modifications 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items 252.247-7023, Transportation of Supplies By Sea

Note: Vendor shall list the country of origin for each line item.

DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)

52.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution

DLA PROCUREMENT NOTES (See Attachment for Full Text)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (SEP 2016) C04 Unused Former Government Surplus Property (DEC 2016) C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017) C20 Vendor Shipment Module (VSM) (AUG 2017) E05 Product Verification Testing (JUN 2018) H10 Awardee Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020) L06 Agency Protests L31 Additive Manufacturing (JUN 2018) M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016) M06 Evaluation of Offers for Part Numbered Items (SEP 2016).

LOCAL CLAUSES (See Attachment for Full Text):

YM3 A1: Additional Information YM3 C500: Mercury Control (Supplies) YM3 C528: Specification Changes YM3 D2.2: Marking of Shipments YM3 D4: Preparation for Delivery (Commercially Packaged Items) YM3 D8: Prohibited Packing Materials YM3 E2: Inspection and Acceptance (Destination) YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard YM3 M8: Single Award for All Items

Quoters are reminded to include a completed copy of 52.212-3 and its ALT I if not updated in

SAM.

This announcement will close on Thursday, February 15, 2024, at 12:00pm est. The Point of Contact for this solicitation is Tasha Dooley who can be reached at tasha.dooley@dla.mil. All responsible sources may submit a quote which shall be considered by the agency.

System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.

If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.

http://www.sam.gov/

Please submit bids via email at tasha.dooley@dla.mil and dla-kme-quotations@dla.mil.

All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

******* END OF COMBINED SYNOPSIS/SOLICITATION ********