SPMYM324Q2024 Attachment-1.pdf
PDF 92 KB Posted
- Attached to
- Sheet Plastic Delrin AF DE 588 Federal contract opportunity
- Solicitation number
- SPMYM324Q2024
About this file
This document is a Contract Attachment that provides detailed specifications for a sheet plastic product called Delrin AF DE 588. The key details include:
The product is a 1-1/4" thick x 12" wide x 48" long sheet plastic made of Delrin, DuPont AF DE 588 per NAVSEA drawing 803-4384678 Rev C. The material must meet specific physical and mechanical property requirements including tensile strength, tensile impact, compressive stress, water absorption, hardness, and teflon fiber content. Test reports and a certificate of compliance are required. The product is subject to mercury control requirements. Packaging and inspection responsibilities are also specified.
This Contract Attachment is associated with Solicitation SPMYM324Q2024 issued by the Defense Logistics Agency Land and Maritime for Sheet Plastic Delrin. The solicitation is a requirement for the Portsmouth Naval Shipyard.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM324Q2024 Security Agreement.docx | DOCX document | |
| SPMYM324Q2024 Combined Synopsis Solicitation.docx | DOCX document | |
| SPMYM324Q2024 RFQ.docx | DOCX document | |
| SPMYM324Q2024 Exhibit A.pdf | ||
| Clauses - Full Text Provisions and Clauses 231228.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
ATTACHMENT PRINTED 04/25/2023 PAGE
9330 1X
ITEM NO.
SECTION B
STOCK NUMBER
9330-LL-L01-0024
SMIC
9G
ITEM NAME SHEET, PLASTIC (DELRIN AF DE 588)
SPECIAL CHARACTERISTICS
1-1/4" THK X 12"WIDE X 48"LONG **DWG ON FILE AT CODE 245.1***
C DESCRIPTION/SPECIFICATIONS
C. DECRIPTION/SPECIFICATION
C.1 MANUFACTURE DELRIN, DUPONT AF DE 588 IN ACCORDANCE WITH NAVSEA DWG 803-4384678 REV C , GENERAL NOTES 7.C.(9) AND 7.D WITH ALL APPLICABLE NOTES, EXCEPT AS AMPLIFIED OR MODIFIED
HEREIN:
ITEM
(A)
PROPERTY ASTM TEST METHOD (L/R)
SPECIFIC GRAVITY D792 (NOTE 1)
VALUE
1.50 - 1.57
(B) MELTING POINT D2133 OR D3418 172 - 184 DEG C (342 - 363 DEG F)
(C) TENSILE STRENGTH (MIN) D638 (NOTES 1 & 4) 6100 PSI
(D) TENSILE IMPACT (MIN) D1822 TYPE S (NOTES 1 & 4) 5 FT-LB/SQ IN
(E) COMPRESSIVE STRESS D695 2100 @ 1% DEF.
(MIN - PSI) (NOTES 1 & 4) 11,000 @ 10% DEF.
(F) WATER ABSORPTION D570 .30% MAX 24 HOURS
(G) ROCKWELL HARDNESS (R) D785 (NOTE 1) 115 +/- 15
(H) TEFLON FIBER CONTENT 2584 OR D3171 (NOTE 2) 18 - 23%
(I) DIMENSIONAL CHANGE (NOTE 3) .7% MAX
NOTES:
1. Material conditioning prior to test is at the vendor’s option.
2. Teflon Fiber Content - Use Dupont Gravimetric method. White Teflon string inclusions shall not exceed the following A. Diameter 1/32"
B. Length 1/8"
C. Density 6 indications per 100 SQ IN
SPMYM324Q2024
CONTRACT
ATTACHMENT PRINTED 04/25/2023 PAGE
9330 1X
3. The test method to determine dimensional stability shall be performed as follows: The test specimens (finished pieces) tested shall be measured at 23 +/- 3 deg C (73 +/- 5F) and placed in a mineral oil* bath maintained at 160 +/- 3 deg C (320 +/- 5F) the specimens shall remain in the bath for six (6) hours at temperature and allowed to slow cool in the bath at a rate not to exceed 23 +/- 3 deg C (73 +/- 5F) per hour. When the bath reaches 23 +/- 3 deg C (73 +/- 5F), the test specimens shall be removed and measured. The percent change in each dimension, outside diameter, inside diameter and thickness shall not be greater than the value specified.
*Mineral oil meets the specification as listed below:
Description ................................... Passes U.S.P. Test (USP XX, P.1143) Solubility ...................................... Passes U.S.P. Test (USP XX, P.1143) Neutrality ..................................... Passes U.S.P. Test (USP XX, P.532) Readily Carbonizable Substances ... Passes U.S.P. Test (USP XX, P.532) Limit of Polynuclear Compounds.... Passes U.S.P. Test (USP XX, P.532) Solid Paraffin..................................Passes U.S.P. Test (USP XX, P.532) Specific Gravity @ 25 deg C (77 deg F) 0.8600 to 0.8900 Viscosity @ 37.8 deg C (100F) ........ 73.6 to 84.4 Centistokes (340-390 SUS) Flash Point Cleveland Open Cup… 420 deg F (216C) (Typical) Refractive Index @ 20C (68F) ......... 1.480 (Typical)
C.2 DATA REQUIREMENTS:
C.2.1 TEST REPORTS (MECHANICAL PROPERTY TEST RESULTS), SEE EXHIBIT A, SEQUENCE A001
C.2.2 CERT. OF COMPLIANCE. SEE EXHIBIT A, SEQUENCE A002
C.3 C500 MERCURY CONTROL (SUPPLIES)
D PRESERVATION/PACKAGING/PACKING
D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
E INSPECTION ACCEPTANCE
E.1 E1 RESPONSIBILITY FOR INSPECTION
H SPECIAL PROVISIONS
K Section
L Section
M Section Digitally signed by SWEENEY.HEATHER.S.1455804520 Date: 2023.05.03 09:46:51 -04'00' SWEENEY.HEATHER.S.1455804520
SPMYM324Q2024
File details come from the government source that posted it. Updated .