SPMYM224Q0542.pdf

PDF 1 MB Posted Dec 27, 2023

Attached to: HOSE Federal contract opportunity
Solicitation number: SPMYM224Q0542
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Dec 28, 2023

This solicitation requests offers for the supply of hoses to be used for petroleum, oily waste, sewage, and fresh/salt water transfer. Required are various sizes of hoses from 1-1/2" to 4" in diameters and lengths from 25' to 50'. Offerors must provide manufacturer specifications for any equivalent products quoted and submit sample hoses if requested. Offers are due by 10:00 AM on January 3, 2024 and shall be submitted via email. Pricing shall be provided on a unit price line item basis as specified in the solicitation. The government intends to make award without discussions and reserves the right to make a single award. Delivery will be to Puget Sound Naval Shipyard in Bremerton, Washington by June 14, 2024.

View the file

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SEE ADDENDUM

(No Collect Calls)

SPMYM224Q0542 27-Dec-2023

b. TELEPHONE NUMBER

360-813-9267

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 03 Jan 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

SPMYM29. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

LINA A. CRUZ

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

SEE SCHEDULE

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

DLA MARITIME PUGET SOUND

ATTN: LINA CRUZ

467 W ST

BREMERTON WA 98314

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N4523A 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

PUGET SOUND NAVAL SHIPYARD

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

TEL: 360-476-7640 FAX:

FAX:

TEL: 360-813-9267 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

326220

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF84

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

SPMYM224Q0542

Section SF 1449 - CONTINUATION SHEET

VENDOR INFORMATION

1. The Contractor’s POC is Phone:

Fax:

E-mail:

2. Buyer POC is: LINA A. CRUZ Phone: 360-813-9267 Fax:

E-mail: LINA.1.CRUZ@DLA.MIL

3. Invoice Information:

The contractor shall utilize the electronic invoicing upon delivery of supplies indicated herein. Invoice may be submitted not more than one every two weeks. Invoices must be submitted electronically using Wide Area Work Flow (WAWF) – Receipt and Acceptance. The contractor shall self-register at the web site: https://wawf.eb.mil.

Contractor training is available on the Internet at https://wawftraining.eb.mil.

Additional support can be accessed by calling the NAVY WAWF Assistance Line: 1-877-251-9293.

See clause 252.232-7006 for WAWF table.

4. Inspection Level:

QA 4 7 days inspection

5. Defense Biometric Identification System (DBIDS):

Effective 14 August 2017, NCACS credentials will no longer be accepted for base access. Any new contractor, vendor or supplier requesting base access will be required to obtain a Defense Biometric Identification System (DBIDS) credential. NCACS credentials will no longer be issued. Only DBIDS credentials will be issued to ALL contractors, vendors and suppliers seeking base access AFTER 30 June 2017. Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions.

The system provides continuous vetting anytime the DBIDS card is scanned at an installation entry point.

If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential:

Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center (VCC) representative.

The VCC will pull up your information in the computer, ensuring all information is current and correct.

Once your information is validated, a temporary DBIDS credential is provided.

Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 180 days).

For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center.

The representative will enter base access authorization and then you may proceed to work.

If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

Present a letter or official document from any government sponsoring organization that provides the purpose for your access.

Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

Upon completion of the background check, the Visitor Control Center representative will complete the

DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

All deliveries must pass through the base Truck Inspection Station. All delivery vehicles are subject to inspection.

Drivers should expect delays due to heightened security.

For access to the main, perimeter gates at any Navy Base Kitsap installation, contractors are required to be a US Citizen and have either:

(a) DBIDS badge or

(b) Request a One-day Visitor badge at Pass & ID. Be prepared to present:

-Photo ID -Original proof of citizenship (any one of the following is acceptable):

State Certified Birth Certificate (must have the raised seal) Unexpired U.S. passport/Passport Card Alien Registration Card

Enhanced state-issued driver's license only accepted from Michigan, Minnesota, New York, Vermont, and Washington. Real ID licenses are not accepted at this time.

Naturalization papers Certificate/Statement of Birth Born Abroad)

-Current vehicle registration and insurance -Bill of lading that has the delivery address on it

Please note: The DBIDS badge does not give access through the second, Operational Area (OA) gate to lower base Bangor or to the Controlled Industrial Area (CIA) at Puget Sound Naval Shipyard (PSNS). To gain access to either the OA Gate or CIA area, a Navy Region Bangor or NAVSEA Badge is required.

To request a NAVY REGION NW badge, https://www.bavr.cnic.navy.mil/. Sponsor email is trina.williamson@navy.mil

To request a NAVSEA badge, call PSNS Pass & ID 360-476-4882.

FOR MORE INFORMATION VISIT: https://www.cnic.navy.mil/om/dbids.html

SALIENT CHARACTERISTICS

ITEM DESCRIPTION: ASW/PETROLEUM/OILY WASTE WATER HOSE ASSEMBLY

(1-1/2” ID X 25’ LONG)

N4523A33526421 CLIN0001

Or-Equal Purchase Specification:

Hose, Nonmetallic, Nitrile Tube & Nitrile or Neoprene Cover: Coupled and Fully Assembled.

Application for Intended Use: May be used for Temporary Service Petroleum/Oily Waste Transfer Systems, or Shipboard Seawater / Fresh Water Suction/Discharge Services.

Description:

1.Size: 1-1/2” I.D. by 25’ long.

2.Nominal OD: 2” 3.Vacuum: Full 4.Working Pressure: 250 PSI, minimum.

5.Burst Pressure: 1,000 PSI, minimum.

6.Rated bend radius: 6 inches or less.

7.Rated Continuous Temperature: -20ºF to 180ºF

Construction:

8.Tube: Extruded specially compounded Nitrile synthetic rubber. Must meet Rubber Manufacturers Association (RMA) Class Astandard for high oil resistance. Hose shall be wrapped or mandrel type construction with a heavy enough wall construction toallow the use of crimped or swaged couplings with interlocking ferrules.

9.Reinforcement: Multiple braids of textile fabrics with a high-tensile wire helix.

10.Cover: Specially compounded Nitrile, Neoprene or blended synthetic rubber. The cover shall be smooth slick finish, not a clothwrap impression type and shall meet RMA Class B standards for weather, ozone and limited oil resistance.

11.Cover Color: Black cover with a contrasting colored brand strip down the entire lay line with contrasting lettering.

12.Hose end assembly shall be accomplished in accordance with established National Association for Hose Accessories Distribution(NAHAD) certification standards.

13.Each hose assembly shall have the following components installed at each end:

a.1st Hose End; Brass, 1-1/2” Cam & Groove Quick Disconnect Adapter by Hose Shank, PT Coupling Co., Part # 15E, Item # 1200515.

b.2nd Hose End; Brass, 1-1/2” Female Cam & Groove Quick Disconnect Coupler by Hose Shank, with Stainless Steel Cam Arms, Pins,Pull Rings and Passive Locking Device, PT Coupling Co. , Part # 15CSLII, Item # 1290315L2.

c.End fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co. “Pro-Grip C50SS Crimp FerruleStainless Steel” sized to match the hose and fittings. No hose clamps or bands will be accepted.

14.All end fittings must be meet Commercial Item Description (CID) A-A-59326 and shall have a working pressure of 250 PSI orgreater. Any manufacturers hose end coupling offered other than the above referenced part numbers must be approved by PSNSCode 260.41.

15.Branding / Marking: Hose shall be continuously ink-branded, stencil painted, Mylar or stripe branded /marked in ½” lettering(minimum), which must be in a contrasting color to the black outer cover of the hose. The lettering shall state as a minimum:

a.Standard Hose Brand/Line/Model number, Petroleum type, Date of Manufacture etc.

b.PSNS & IMF S/99 16.Price quotes for market survey request will not be accepted without the hose, fitting, and ferrule manufacturer cut sheets orproduct description sheets attached, which shall include as a minimum the technical characteristic of the components and themanufacturer’s address, telephone/fax number and manufacturer point of contact. The market survey price quote must referencethe manufacturer’s part numbers for the item quoted.

17.All quoting vendors if requested must submit a five-foot long hose assembly at vendor expense, for destructive testing analysis.

18.All Or-Equal offers must be approved by PSNS & IMF Code 260.41 prior to purchase.

Hose Test & Assembly Certification:

Each hose assembly shall be hydrostatically strength tested with commercial clean water as a test medium, at 275 (+10,-0) PSIG for 10 minutes. Each hose is to be certified to the requirements of the United States Coast Guard (USCG) for the transfer of oil over water. Each certified hose is to be assigned by the manufacturer a unique serial number, to be permanently stamped or etch marked on the hose ferrule of each hose end. Hose manufacturer shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance to NAHAD standards, also that the hose is does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested & USCG certified (100% of hoses) shall be provided with shipped hoses. Written certifications shall include the witness signature of the tester, test date and must correspond to each unique hose serial number.

N4523A33526421 CLIN0001

(1-1/2” ID X 50’ LONG)

N4523A33526422 CLIN0002

Or-Equal Purchase Specification:

Hose, Nonmetallic, Nitrile Tube & Nitrile or Neoprene Cover: Coupled and Fully Assembled.

Application for Intended Use: May be used for Temporary Service Petroleum/Oily Waste Transfer Systems, or Shipboard Seawater / Fresh Water Suction/Discharge Services.

Description:

1.Size: 1-1/2” I.D. by 50’ long.

2.Nominal OD: 2” 3.Vacuum: Full 4.Working Pressure: 250 PSI minimum.

5.Burst Pressure: 1,000 PSI minimum.

6.Rated Bend Radius: 6 Inches or less.

7.Rated Continuous Temperature: -20ºF to 180ºF

Construction:

8.Tube: Extruded specially compounded Nitrile synthetic rubber. Must meet Rubber ManufacturersAssociation (RMA) Class A standard for high oil resistance. Hose shall be wrapped or mandrel type construction with a heavy enough wall construction to allow the use of crimped or swaged couplings with interlocking ferrules.

9.Reinforcement: Multiple braids of textile fabrics with a high-tensile wire helix.

10.Cover: Specially compounded Nitrile, Neoprene or blended synthetic rubber. The cover shall be smooth,slick finish, not a cloth wrap impression type and shall meet RMA Class B standards for weather, ozone and limited oil resistance.

11.Cover Color: Black cover with a contrasting colored brand strip down the entire lay line with contrastinglettering.

12.Hose end assembly shall be accomplished in accordance with established National Association for HoseAccessories Distribution (NAHAD) certification standards.

13.Each hose assembly shall have the following components installed at each end:

a.1st Hose End; Brass, 1-1/2” Cam & Groove Quick Disconnect Adapter by Hose Shank, PT Coupling Co., Part # 15E, Item # 1200515.

b.2nd Hose End; Brass, 1-1/2” Female Cam & Groove Quick Disconnect Coupler by Hose Shank, with Stainless Steel Passive Locking Device, Cam Arms, Pins, and Pull Rings, PT Coupling Co., Part # 15CSLII, Item # 1290315L2 .

c.End fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co. “Pro-Grip C50SS Crimp Ferrule Stainless Steel”sized to match the hose and fittings. Hose clamps will not be accepted.

14.All end fittings must be meet Commercial Item Description (CID) A-A-59326.

15.Branding / Marking: Hose shall be continuously ink-branded, stencil painted, or Mylar stripe branded/marked in ½” lettering (minimum), which must be in a contrasting color to the black outer cover of the hose. The lettering shall state as a minimum:

a.Standard Hose Brand/Line/Model number, Petroleum type, Date of Manufacture etc.

b.PSNS & IMF S/99

16.Price quotes for market survey request will not be accepted without the hose, fitting, and ferrulemanufacturer cut sheets or product description sheets attached, which shall include as a minimum the technical characteristic of the components and the manufacturer’s address, telephone/fax number and manufacturer point of contact. The market survey price quote must reference the manufacturer’s part numbers for the item quoted.

17.All quoting vendors if requested must submit a five-foot long hose assembly at vendor expense, fordestructive testing analysis.

18.All Or-Equal offers must be approved by PSNS & IMF Code 260.41 prior to purchase.

Hose Test & Assembly Certification:

Each certified hose is to be assigned by the manufacturer a unique serial number, to be permanently stamped or etch marked on the hose ferrule of each hose end. Hose manufacturer shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance to NAHAD standards, also that the hose is does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested & USCG certified (100% of hoses) shall be provided with shipped hoses. Written certifications shall include the witness signature of the tester, test date and must correspond to each unique hose serial number.

Applicable regulations: Industrial Process Instruction 0505-904B Ch-3, Codes of Federal Regulations, Title 33, Volume 2, Section 154, and Commercial Item Description (CID) A-A-59326.

N4523A33526422 CLIN0002

CONTRACT ITEM DESCRIPTION: ASW/PETROLEUM / OILY WASTE WATER HOSE ASSEMBLY

2-1/2" ID x 25' Long

N4523A33526423 CLIN0003

Or-Equal Purchase Specification:

Hose, Nonmetallic, Nitrile Tube & Nitrile or Neoprene Cover: Coupled and Fully Assembled.

Application for Intended Use: May be used for Temporary Service Petroleum/Oily Waste Transfer Systems, or Shipboard Seawater / Fresh Water Suction/Discharge Services.

1.Size: 2-1/2” I.D. by 25’ long.

2.Nominal OD: 3” 3.Vacuum: Full 4.Working Pressure: 250 PSI, minimum.

5.Burst Pressure: 1,000 PSI, minimum.

6.Rated bend radius: 10 inches or less.

7.Rated Continuous Temperature: -20ºF to 180ºF

Construction:

1.Tube: Extruded specially compounded Nitrile synthetic rubber. Must meet Rubber Manufacturers Association (RMA) Class A standard for high oil resistance. Hose shall be wrapped or mandrel type construction with a heavy enough wall construction to allow the use of crimped or swaged couplings with interlocking ferrules.

2.Reinforcement: Multiple braids of textile fabric with a high-tensile wire helix.

3.Cover: Specially compounded Nitrile, Neoprene or blended synthetic rubber. The cover shall be smooth slick finish, not a cloth wrap impression type, and shall meet RMA Class B standards for weather, ozone and limited oil resistance.

4.Cover Color: Black cover with a contrasting Red colored brand strip down the entire lay line with contrasting lettering.

5.Hose end assembly shall be accomplished in accordance with established National Association for Hose Accessories Distribution (NAHAD) certification standards.

6.Each hose assembly shall have the following components installed at each end:

•1st Hose End; Brass, 2-1/2” Male Cam & Groove Adapter by Hose Shank. PT Coupling Co., Part # 25E, Item # 1200525.

•2nd Hose End; Brass, 2-1/2” Female Cam & Groove Coupler by Hose Shank, with Stainless Steel Cam Arms, Pins, PullRings and Passive Locking Device. PT Coupling Co., Part # 25CSLII, Item # 1290325L2.

•End fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co., “ProGrip" C50SS CRIMPFERRULE STAINLESS STEEL. Ferrules to be sized to match the hose and fittings.No “or equal” bands, hose clamps, or sleeves will be accepted.

7.All end fittings must be made from US virgin brass with a machined finish IAW Commercial Item Description (CID) A-A-59326 and shall have a working pressure of 250 PSI or greater. Any manufacturers hose end coupling offered other than the above referenced part numbers must be approved by PSNS Code 260.41.

8.Branding / Marking: Hose shall be continuously ink-branded, stencil painted, Mylar or stripe branded /marked in ½” lettering (minimum), which must be in a contrasting color to the Red band strip and black outer cover of the hose.

The lettering shall state as a minimum:

a.Standard Hose Brand/Line/Model number, Petroleum type, Date of Manufacture etc.

b.PSNS & IMF S/99

9.Price quotes for market survey request will not be accepted without the hose, fitting, and ferrule manufacturer cut sheets or product description sheets attached, which shall include as a minimum the technical characteristic of the components and the manufacturer’s address, telephone/fax number and manufacturer point of contact. The market survey price quote must reference the manufacturer’s part numbers for the item quoted.

10.All quoting vendors if requested must submit a five-foot long hose assembly at vendor expense, for destructive testing analysis.

11.All Or-Equal offers must be approved by PSNS & IMF Code 260.41 prior to purchase.

Hose Test & Assembly Certification:

Each hose assembly shall be hydrostatically strength tested with commercial clean water as a test medium, at 275 (+10, -0) PSIG for 10 minutes. Each hose is to be certified to the requirements of the United States Coast Guard (USCG) for the transfer of oil over water. Each certified hose to be assigned by the manufacturer a unique serial number, to be permanently stamped or etch marked on the hose ferrule of each hose end. Hose manufacturer shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance to NAHAD standards. Also that the hose is does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested & USCG certified (100% of hoses) shall be provided with shipped hoses. Written certifications shall include the witness signature of the tester, test date and must correspond to each unique hose serial number.

Applicable regulations: NAVSHIPYDPUGET Instruction 10330.11C, Cat III, Industrial Process Instruction 0505-904B Ch-3, Codes of Federal Regulations Title 33, Volume 2, Section 154, Commercial Item Description

(CID) A-A-59326.

N4523A33526423 CLIN0003

(2-1/2" ID x 50' Long)

N4523A33526424 CLIN0004

Or-Equal Purchase Specification:

Hose, Nonmetallic, Nitrile Tube & Nitrile or Neoprene Cover: Coupled and Fully Assembled.

Application for Intended Use: May be used for Temporary Service Petroleum/Oily Waste Transfer Systems, or Shipboard Seawater / Fresh Water Suction/Discharge Services.

1.Size: 2-1/2” I.D. by 50’ long.

2.Nominal OD: 3” 3.Vacuum: Full 4.Working Pressure: 250 PSI, minimum.

5.Burst Pressure: 1,000 PSI, minimum.

6.Rated bend radius: 10 inches or less.

7.Rated Continuous Temperature: -20º F to 180º F

Construction:

2.Reinforcement: Multiple braids of textile fabric with a high-tensile wire helix.

4.Cover Color: Black cover with a contrasting Red colored brand strip down the entire lay line with contrasting lettering.

5.Hose end assembly shall be accomplished in accordance with established National Association for Hose Accessories Distribution (NAHAD) certification standards.

6.Each hose assembly shall have the following components installed at each end:

a.1st Hose End; Brass, 2-1/2” Male Cam & Groove Adapter by Hose Shank. PT Coupling Co., Part # 25E, Item # 1200525.

b.2nd Hose End; Brass, 2-1/2” Female Cam & Groove Coupler by Hose Shank, with Stainless Steel Cam Arms, Pins, Pull Rings,and Passive Locking Device. PT Coupling Co., Part # 25CSLII, Item # 1290325L2.

c.End fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co. “Pro-Grip" C50SS CRIMPFERRULE STAINLESS STEEL. Ferrules to be sized to match the hose and fittings.No “or equal” bands, hose clamps, or sleeves will be accepted.

7.All end fittings must be made from virgin brass, meet Commercial Item Description (CID) A-A-59326 and shall have a working pressure of250 PSI or greater. Any manufacturers hose end coupling offered other than the above referenced part numbers must be approved by PSNSCode 260.41.

The lettering shall state as a minimum:

a.Standard Hose Brand/Line/Model number, Petroleum type, Date of Manufacture etc.

b.PSNS & IMF S/99

10.All quoting vendors if requested must submit a five-foot long hose assembly at vendor expense, for destructive testing analysis.

11.All Or-Equal offers must be approved by PSNS & IMF Code 260.41 prior to purchase.

Hose Test & Assembly Certification:

Each hose assembly shall be hydrostatically strength tested with commercial clean water as a test medium, at 275 (+10, -0) PSIG for 10 minutes. Each hose is to be certified to the requirements of the United States Coast Guard (USCG) for the transfer of oil over water. Each certified hose is to be assigned by the manufacturer a unique serial number, to be permanently stamped or etch marked on the hose ferrule of each hose end. Hose manufacturer shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance to NAHAD standards, also that the hose is does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested & USCG certified (100% of hoses) shall be provided with shipped hoses. Written certifications shall include the witness signature of the tester, test date and must correspond to each unique hose serial number.

Applicable regulations: NAVSHIPYDPUGET Instruction 10330.11C, Cat III, Industrial Process Instruction 0505-904B. Codes of Federal Regulations, Title 33, Volume 2, Section 154, and Commercial Item Description

(CID) A-A-59326.

N4523A33526424 CLIN0004

CONTRACT ITEM DESCRIPTION: PETROLEUM / OILY WASTE WATER / SEAWATER OR FRESHWATER SUCTION/DISCHARGE

HOSE ASSEMBLY

(4" I.D. x 25' Long)

N4523A33526425 CLIN0005

Or-Equal Purchase Specification:

Hose, Nonmetallic, Nitrile Tube & Nitrile or Neoprene Cover: Coupled and Fully Assembled.

Application or Intended Use: May be used for Temporary Service Petroleum/Oily Waste Transfer Systems, or Shipboard Seawater / Fresh Water Suction/Discharge Services.

1)Size: 4” I.D. by 25’ long.

2)Nominal OD: 4-3/4” 3)Vacuum: Full 4)Working Pressure: 250 PSI, minimum.

5)Burst Pressure: 1,000 PSI, minimum.

6)Rated bend radius: 18 inches or less.

7)Rated Continuous Temperature: -20ºF to 180ºF

Construction:

8)Tube: Extruded specially compounded Nitrile synthetic rubber. Must meet Rubber Manufacturers Association (RMA) Class Astandard for high oil resistance. Hose shall be wrapped or mandrel type construction with a heavy enough wall construction to allow theuse of crimped or swaged couplings with interlocking ferrules.

9)Reinforcement: Multiple braids of textile fabrics with a high-tensile wire helix.

10)Cover: Specially compounded Nitrile, Neoprene or blended synthetic rubber. The cover shall be smooth, not cloth wrap impressiontype and shall meet RMA Class B standards for weather, ozone and limited oil resistance.

11)Cover Color: Black cover with a contrasting Red colored brand strip down the entire lay line with contrasting lettering.

12)Hose end assembly shall be accomplished in accordance with established National Association for Hose Accessories Distribution(NAHAD) certification standards.

13)Each hose assembly shall have the following components installed at each end:

A.1st Hose End; Brass, 4” Heavy Duty Male Cam & Groove Adapter by Hose Shank. PT Coupling Co., Part # 40EHD,Item # 1200540H.

B.2nd Hose End; Brass, 4” Heavy Duty Female Cam & Groove Coupler by Hose Shank with Stainless Steel Cam Arms, Pins, and PullRings. PT Coupling Co. Part # 40CHD, Item # 1200340H.

C.End Fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co., “Pro-Grip C50SS Stainless SteelCrimp Ferrule”, sized to match the hose and fittings. No “or equal” hose clamps or bands will be accepted.

14)All end fittings must be made from virgin brass and meet Commercial Item Description (CID) A-A-59326 and shall have a workingpressure of 250 PSI or greater. Any manufacturers hose end coupling offered other than the above referenced part numbers must beapproved by PSNS Code 260.41.

15)Branding / Marking: Hose shall be continuously ink-branded, stencil painted, Mylar or stripe branded /marked in ½” lettering(minimum), which must be in a contrasting color to the RED band strip and black outer cover of the hose. The lettering shall state as aminimum:

A.Standard Hose Brand/Line/Model number, Petroleum type, Date of Manufacture etc.

B.PSNS & IMF S/99

16)Price quotes for market survey request will not be accepted without the hose, fitting, and ferrule manufacturer cut sheets or productdescription sheets attached, which shall include as a minimum the technical characteristic of the components and the manufacturer’saddress, telephone/fax number and manufacturer point of contact. The market survey price quote must reference the manufacturer’s partnumbers for the item quoted.

17)All quoting vendors if requested must submit a five-foot long hose assembly at vendor expense, for destructive testing analysis.

18)All Or-Equal offers must be approved by PSNS & IMF Code 260.41 prior to purchase.

Hose Test & Assembly Certification:

Each hose assembly shall be hydrostatically strength tested with commercial clean water as a test medium, at 275 (+10, -0) PSIG for 10 minutes. Each hose is to be certified to the requirements of the United States Coast Guard (USCG) for the transfer of oil over water. Each certified hose is to be assigned by the manufacturer a unique serial number, to be permanently stamped or etch marked on the hose ferrule of each hose end. Hose manufacturer shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance to NAHAD standards. Also that the hose is does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested & USCG certified (100% of hoses) shall be provided with shipped hoses. Written certifications shall include the witness signature of the tester, test date and must correspond to each unique hose serial number.

Applicable regulations: PSNS&IMFINST 10330.11E, PSNS&IMFINST 11300.10K, Industrial Process Instruction 0505-904B CH-3, Code of Federal Regulations Title 33, Volume 2, Section 154, and Commercial Item Description (CID) A-A-59326.

N4523A33526425 CLIN0005

CONTRACT ITEM DESCRIPTION: PETROLEUM / OILY WASTE WATER / SEAWATER OR FRESHWATER SUCTION/DISCHARGE

HOSE ASSEMBLY

(4" I.D. x 50' Long)

N4523A33526426 CLIN0006

Or-Equal Purchase Specification:

Hose, Nonmetallic, Nitrile Tube & Nitrile or Neoprene Cover: Coupled and Fully Assembled.

Application or Intended Use: May be used for Temporary Service Petroleum/Oily Waste Transfer Systems, or Shipboard Seawater / Fresh Water Suction/Discharge Services.

1.Size: 4” I.D. by 50’ long.

2.Nominal OD: 4-3/4” 3.Vacuum: Full 4.Working Pressure: 250 PSI, minimum.

5.Burst Pressure: 1,000 PSI, minimum.

6.Rated bend radius: 18 inches or less.

7.Rated Continuous Temperature: -20ºF to 180ºF

Construction:

9.Reinforcement: Multiple braids of textile fabrics with a high-tensile wire helix.

10.Cover: Specially compounded Nitrile, Neoprene or blended synthetic rubber. The cover shall be smooth, not cloth wrap impressiontype and shall meet RMA Class B standards for weather, ozone and limited oil resistance.

11.Cover Color: Black cover with a contrasting Red colored brand strip down the entire lay line with contrasting lettering.

12.Hose end assembly shall be accomplished in accordance with established National Association for Hose Accessories Distribution(NAHAD) certification standards.

13.Each hose assembly shall have the following components installed at each end:

A.1st Hose End; Brass, 4” Heavy Duty Male Cam & Groove Adapter by Hose Shank, PT Coupling Co., Part # 40EHD, Item # 1200540H.

B.2nd Hose End; Brass, 4” Heavy Duty Female Cam & Groove Coupler by Hose Shank with 316 Stainless Steel Cam Arms, Pins, Pull Rings, and Passive Locking Device. PT Coupling Co., Part # 40CHD, Item # 1200340H.

C.End fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co., “Pro-Grip C50SS” Stainless Steel CrimpFerrules sized to match the hose. No “or equal” hose clamps accepted.

14.All end fittings must be made from US virgin brass with a machined finish IAW Commercial Item Description (CID) A-A- 59326 andshall have a working pressure of 250 PSI or greater. Any manufacturers hose end couplings offered other than the above referenced part numbers must be approved by PSNS Code 260.41.

15.Branding / Marking: Hose shall be continuously Ink Branded, stencil painted, Mylar, or Stripe Branded, marked in ½” lettering(minimum), which must be in a contrasting color to the RED band strip and black outer cover of the hose. The lettering shall stateas a minimum:

A.Standard Hose Brand/Line/Model Number, Petroleum type, Date of Manufacture etc.

B.PSNS & IMF S/99

16.Price quotes for market survey request will not be accepted without the hose, fitting, and ferrule manufacturer cut sheets or productdescription sheets attached, which shall include as a minimum the technical characteristic of the components and themanufacturer’s address, telephone/fax number and manufacturer point of contact. The market survey price quote must referencethe manufacturer’s part numbers for the item quoted.

17.All quoting vendors if requested must submit a five-foot long hose assembly at government expense, for destructive testinganalysis.

18.All Or-Equal offers must be approved by PSNS & IMF Code 260.41 prior to purchase.

Hose Test & Assembly Certification:

Each hose assembly shall be hydrostatically strength tested with commercial clean water as a test medium, at 275 (+10,-0) PSIG for 10 minutes. Each hose is to be certified to the requirements of the United States Coast Guard (USCG) for the transfer of oil over water. Each certified hose is to be assigned by the manufacturer a unique serial number, to be permanently stamped or etch marked on the hose ferrule of each hose end. Hose manufacturer shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance to NAHAD standards, also that the hose does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested & USCG certified (100% of hoses) shall be provided with shipped hoses. Written certifications shall include the witness signature of the tester, test date and must correspond to each unique hose serial number.

Applicable regulations: PSNS&IMFINST 10330.11E, PSNS&IMFINST 11300.10K, Industrial Process Instruction 0505-904B CH-3, Codes of Federal Regulations Title 33, Volume 2, Section 154, and Commercial Item (CID) A-A-59326. N4523A33526426 CLIN0006

CONTRACT ITEM DESCRIPTION: 2-1/2” SEWAGE (CHT) DISCHARGE HOSE ASSEMBLY

(2-1/2” ID X 25’ LONG)

(COMMERICALLY CALLED “SEWAGE TRANSFER” HOSE

N4523A33526427 CLIN0007

Or Equal Purchase Specification: Coupled and fully assembled.

Hose, Nonmetallic, Multiple Tube & Cover with helix wire construction; Coupled and Fully Assembled, 1.Size: 2-1/2” I.D. by 25’ Long.

2.Application: Temporary Marine (CHT) Ship to Shore Sewage Discharge Services.

3.Working Pressure: 150 PSI, minimum.

4.Burst Pressure: 600 PSI, minimum.

5.Vacuum Rating: 29 Hg 6.Rated bend radius: 9” inches or less.

7.Rated Continuous Temperature: -25º F to +180º F.

8.If requested all bidding vendors must submit: a hose, end fitting, and ferrule manufacturer cut sheet orproduct description sheet attachments, which shall include as a minimum the technicalcharacteristic of the components and the manufacturer’s address, telephone, fax number and manufacturerpoint of contact.

9.All quoting vendors if requested must submit a five-foot long hose assembly to Shop 99 at vendor’s expense, fordestructive testing analysis prior to PSNS & IMF Engineering Code 270TS approval to purchase.

10.PSNS & IMF Engineering Code 270TS must approve all exceptions and Or-Equal offer’s prior to purchase.

Construction:

1.Tube: Black, Nitrile, must meet Rubber Manufacturers Association (RMA) Class A standards for oil resistance.Hose shall be wrapped or mandrel type construction.

2.Reinforcement: Multiple spiral plied fabric helix construction.

3.Cover: Smooth Cover, Black synthetic rubber, Neoprene or blend, must meet minimum of RMA Class C standardsfor limited oil resistance.

4.Cover Color: Black (No continuous yellow accepted).

5.Hose end assembly shall be accomplished in accordance with established National Association for Hose &Accessories Distribution (NAHAD) certification standards.

6.Each hose assembly shall have the following components installed at each end:

a.1st Hose End; Brass, 2-1/2” Male Cam & Groove Adapter by Hose Shank, PT Coupling Co., Part # 25E,Item # 1200525.

b.2nd Hose End; Brass, 2-1/2” Female Cam & Groove Coupler by Hose Shank with Stainless Steel, Cam Arms,Pins, Pull Rings and Passive Locking Device, PT Coupling Co., Part # 25CSLII, Item # 1290325L2.

c.Hose end fittings to comply with COMMERCIAL ITEM DESCRIPTION (CID) A-A-59326/2 and A-A-59326/6.

d.End Fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co., “ProGrip”C50SS Stainless Steel Crimp Ferrule or equal, sized to match the hose. End fittings shall meet a workingpressure of 150 PSI or greater. (“Or equal” must be interlocking ferrule type system, no hose clamps, bands,or sleeves will be accepted).

7.Branding / Marking: Hose shall be continuously ink-branded, stencil painted, Mylar or stripe branded, marked in1-1/2” lettering (minimum), which must be in a contrasting color or background to the black outer cover of the hose.The lettering shall state as a minimum:

a.Hose Brand/Line/Model Number, Date of Manufacture.

b.PSNS S/99 CHT SEWAGE c.150 PSI MAX

Hose Test & Assembly Certification:

Each hose assembly shall be hydrostatically strength tested with commercial clean (Potable) water as a test medium, at 225 (+20, -0) PSIG for 10 minutes. Each hose to be certified to the testing procedures of the United States Coast Guard (USCG) regulations 33 C.F.R & 154.500 hose assemblies. Hose manufacturer shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance to NAHAD standards. Also that the hose is does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested & USCG certified (100% of hoses) shall be provided with shipped hoses. Written certifications shall include the witness signature of the tester, test date.

N4523A33526427 CLIN0007

CONTRACT ITEM DESCRIPTION: 2-1/2” SEWAGE (CHT) DISCHARGE HOSE ASSEMBLY

(2-1/2” ID X 50’ LONG)

(COMMERICALLY CALLED “SEWAGE TRANSFER” HOSE

N4523A33526428 CLIN0008

Or Equal Purchase Specification: Coupled and fully assembled.

Hose, Nonmetallic, Multiple Tube & Cover with helix wire construction; Coupled and Fully Assembled, 1.Size: 2-1/2” I.D. by 50’ Long.

2.Application: Temporary Marine (CHT) Ship to Shore Sewage Discharge Services.

3.Working Pressure: 150 PSI, minimum.

4.Burst Pressure: 600 PSI, minimum.

5.Vacuum Rating: 29 Hg 6.Rated bend radius: 9” inches or less.

7.Rated Continuous Temperature: -25º F to +180º F.

10.PSNS & IMF Engineering Code 270TS must approve all exceptions and Or-Equal offer’s prior to purchase.

Construction:

1.Tube: Black, Nitrile, must meet Rubber Manufacturers Association (RMA) Class A standards for oil resistance.Hose shall be wrapped or mandrel type construction.

2.Reinforcement: Multiple spiral plied fabric helix construction.

3.Cover: Smooth Cover, Black synthetic rubber, Neoprene or blend, must meet minimum of RMA Class C standardsfor limited oil resistance.

4.Cover Color: Black (No continuous yellow accepted).

5.Hose end assembly shall be accomplished in accordance with established National Association for Hose &Accessories Distribution (NAHAD) certification standards.

6.Each hose assembly shall have the following components installed at each end:

a.1st Hose End; Brass, 2-1/2” Male Cam & Groove Adapter by Hose Shank, PT Coupling Co., Part # 25E,Item # 1200525.

c.Hose end fittings to comply with COMMERCIAL ITEM DESCRIPTION (CID) A-A-59326/2 and A-A-59326/6.

a.Hose Brand/Line/Model Number, Date of Manufacture.

b.PSNS S/99 CHT SEWAGE c.150 PSI MAX

Hose Test & Assembly Certification:

N4523A33526428 CLIN0008

CONTRACT ITEM DESCRIPTION: 4” SEWAGE (CHT) DISCHARGE HOSE ASSEMBLY

(4” ID X 25’ LONG)

(COMMERICALLY CALLED “SEWAGE TRANSFER” HOSE

N4523A33526429 CLIN0009

Or Equal Purchase Specification: Coupled and fully assembled.

Hose, Nonmetallic, Multiple Tube & Cover with helix wire construction; Coupled and Fully Assembled, 1.Size: 4” I.D. by 25’ long.

2.Application: Temporary Marine (CHT) Ship to Shore Sewage Discharge Services.

3.Working Pressure: 150 PSI, minimum.

4.Burst Pressure: 600 PSI, minimum.

5.Vacuum Rating: 29 Hg 6.Rated bend radius: 12” inches or less.

7.Rated Continuous Temperature: -25º F to 180º F.

10.PSNS & IMF Engineering Code 270TS must approve all exceptions and Or-Equal offer’s prior to purchase.

Construction:

1.Tube: Black Nitrile, must meet Rubber Manufacturers Association (RMA) Class A standards for oil resistance.Hose shall be wrapped or mandrel type construction.

2.Reinforcement: Multiple spiral piled fabric helix construction.

3.Cover: Smooth (corrugated cover is not acceptable), Black synthetic rubber, Neoprene or blend, must meet RMAClass C standards for limited oil resistance.

4.Cover Color: Black (No continuous yellow accepted).

5.Hose end assembly shall be accomplished in accordance with established Association for Hose & AccessoriesDistribution (NAHAD) certification standards.

6.Each hose assembly shall have the following components installed at each end:

a.1st Hose End; Brass, 4” Male Cam & Groove Quick Disconnect Adapter by Hose Shank, PT Coupling Co.,Part # 40E, Item # 1200540.

b.2nd Hose End; Brass, 4” Female Cam & Groove Quick Disconnect Coupler by Hose Shank with StainlessSteel Cam Arms, Pins, Pull Rings, and Passive Locking Device, PT Coupling Co., Part # 40CHD,Item # 1200340H.

c.Hose end fittings to comply with COMMERCIAL ITEM DESCRIPTION (CID) A-A-59326/2 and A-A-59326/6.

d.End Fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co., “ProGrip”C50SS Stainless Steel Crimp Ferrule sized to match the hose and fittings. End fittings shall meet a workingpressure of 150 PSI or greater.

Must be interlocking ferrule type system, no hose clamps or bands will beaccepted.

7.Branding / Marking: Hose shall be continuously ink-branded, stencil painted, Mylar or stripe branded /marked in1-1/2” lettering (minimum), which must be in a contrasting color or background to the black outer cover of the hose.The lettering shall state as a minimum:

a.Hose Brand/Line/Model number, Date of Manufacture.

b.PSNS S/99 CHT SEWAGE c.150 PSI MAX

Hose Test & Assembly Certification:

Each hose assembly shall be hydrostatically strength tested with commercial clean water as a test medium, at 225 (+20, -0) PSIG for 10 minutes. Each hose is to be certified to the testing procedures of the United States Coast Guard (USCG) regulations 33 C.F.R & 154.500 hose assemblies. Hose manufacturer shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance to NAHAD standards. Also that the hose is does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested & USCG certified (100% of hoses) shall be provided with shipped hoses. Written certifications shall include the witness signature of the tester, test date.

N4523A33526429 CLIN0009

CONTRACT ITEM DESCRIPTION: 4” SEWAGE (CHT) DISCHARGE HOSE ASSEMBLY

(4” ID X 50’ LONG)

(COMMERICALLY CALLED “SEWAGE…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Dec 27, 2023.