SPECIFICATION SHEET.pdf
PDF 118 KB Posted
- Attached to
- STEEL GRIT Federal contract opportunity
- Solicitation number
- SPMYM224Q0473
About this file
This specification sheet outlines testing and sampling requirements for steel grit procurements. It specifies that steel grit orders must be poly-lined and sealed, with pallets poly covered and mercury free. Testing will include hardness testing of ten particles from each sample per SAE J1993 paragraph 10.4 and ASTM E 384, with three hardness readings taken on each particle and ninety percent of readings for each sample within specified ranges. Samples will also be tested for conformance to chemical and physical properties defined in SAE J1993. If one sample fails, the entire order shall fail and all batches delivered as part of that order shall be rejected, with sampling and testing of individual batches not required.
The related federal contract opportunity is a solicitation from the Defense Logistics Agency Land and Maritime for steel grit. Testing and sampling requirements are defined in the attached specification sheet.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-24-Q-0473.pdf | ||
| EXHIBIT A.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NSN: LLN050404 DOC: 3342-7905
E. STEEL DRUMS INSIDE AND OUTSIDE ARE REQUIRED
TO BE POLY-LINED AND SEALED, PALLETS ARE REQUIRED
TO BE POLY COVERED
**** MERCURY FREE APPLIES *****
1. Can you update the steel grit ordering data for Shop Stores to include the following information:
a. ASTM B 215 Method B will not be used to draw samples for testing. Keystone samplers and sample splitters will not be used. A representative sample will be drawn from drums per the following sample schedule.
Lot Size Sample Size 2 to 15 drums 2 16 to 25 drums 3 26 to 90 drums 5 91 to 150 drums 8 151 to 280 drums 13 281 to 500 drums 20 501 to 1,200 drums 32 1201 to 3,200 drums 50 3201 to 10,000 drums 80
b. For hardness testing, ten particles will be tested from each sample per SAE J1993 paragraph 10.4 and ASTM E 384.
Three hardness readings will be taken on each particle. Ninety percent of the hardness readings for each sample shall be within the specified range.
C. The samples will be tested for conformance to other chemical and physical properties as defined in SAE J1993.
d. If one sample fails the entire order shall fail and all batches delivered as part of that order shall be rejected.
Sampling and testing of each batch delivered shall not be required.
File details come from the government source that posted it. Updated .