ORDERING DATA.doc
DOC document 64 KB Posted
- Attached to
- RAW RUBBER Federal contract opportunity
- Solicitation number
- SPMYM2-24-Q-0129
About this file
This document provides material ordering data for a federal contract opportunity issued by the Defense Logistics Agency Land and Maritime. The data sheet specifies that the contractor must provide 100 pounds plus or minus 10 pounds of raw, uncured rubber in sheet form ranging from 2 to 3 feet wide by 3 to 6 feet long and 0.25 to 1 inch thick. Packaging must be at a commercial level with poly sheets between layers and all sides covered for pickup by the end use shop. The contractor must also provide a certificate of compliance to specification ZZ-R-768C along with the raw rubber.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOLICITATION SPMYM2-24-Q-0129.pdf | ||
| CDRLs (2).pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ZZ-R-768C
IDN: N4523A 3276-9800
ICN: 38OHD63112
KO: F29
KOI: 001
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
Paragraph 6.2 Ordering Data a.
ZZ-R-768C, RUBBER FOR MOUNTINGS (UNBONDED-SPOOL AND COMPRESSION TYPES), dated 08 SEP 2020.
b.
Form of material required: RAW, UNCURED RUBBER Uncured compound shall be furnished in sheet form ranging in size from 2 feet to 3 feet wide, by 3 feet to 6 feet in length, and ¼ inch to 1 inch thick.
c.
First article: FORMDROPDOWN d.
Type, dimensions and tolerance required for resilient components: RAW UNCURED RUBBER, 100LBS +/-10LBS e.
First article test report: FORMDROPDOWN f.
Packaging requirements: COMMERCIAL LEVEL. MILL RUN WITH POLY SHEETS BETWEEN LAYERS AND COVERED ON ALL SIDES.
DDPW/DLA – CALL END USE SHOP 31 @ ph# 360-476-6187 FOR PICKUP.
g.
Required markings: Interior packages and exterior containers shall be marked in accordance with MIL_STD-129.
Additional Data Requirements: All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
MUST PROVIDE CERTIFICATE OF COMPLIANCE (COC) TO SPECIFICATION ALONG WITH RAW RUBBER.
Prepared By: Ruth Sedgebeer Code: 260M
File details come from the government source that posted it. Updated .