SOLE SOURCE - Copy.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)

The service or material listed on (Document number) 32218646 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below.

There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: SEACON Brantner and Associates DBA TE MOAG Manufacturer POC & Phone Nr. Judy Ghosn 619-456-67 Mfr. Address 1700 Gillespie Way, El Cajon, CA 920

_X_ Description of the item or service required, the estimated cost, and required delivery date.

The following part number is propriety 5078140-459-21 that is manufactured by SEACON Brantner and Associates. The estimated cost will be approximately XXXX each and four are required with a minimum order of 10 for a total of XXXX The RDD is 32weeks from ARO and needed by 04/28/2024

_X_ Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

The part number above is a necessary part of a deployable system that provides all command and control functions for the system, in order to perform its mission. No other known equipment exists to provide the subsea capability, pressure, and footprint (size and shape) to fit and function in the system installed. The part is under configuration control and is non-deviational. Any change would require a complete project redesign and subsequent costly rework finalize design, operational test, and approve drawings in order to make the system functional and ready for deployment.

_X_ The requested material or service represents the minimum requirements of the

Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_X_ The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

The part number above is a necessary part of a deployable system that provides all command and control functions for the system, in order to perform its mission. No other known equipment exists to provide the subsea capability, pressure, and footprint (size and shape) to fit and function in the system installed. The part is under configuration control and is non-deviational. Any change would require a complete project redesign and subsequent costly rework finalize design, operational test, and approve drawings in order to make the system functional and ready for deployment.

_X_ A patent, copyright, or proprietary data limits competition. The proprietary data is:

SEACON Brantner and Associates These are “direct replacements” parts/components for existing brand name equipment.

_X_ Other information to support a sole-source buy:

SEACON Brantner and Associates designs and builds specific cables just for the United States Navy.

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Title Date

Contracting Officer Signature Date_

SHOEMAKER Diitll id b

COREY JAMES

SHOEMAKERCOREYJA

Signature Activity 1096440045

Date: 20230810

Date