SPMYM223Q0661.pdf

PDF 583 KB Posted Feb 2, 2023

Attached to: HEX HEAD SCREWS Federal contract opportunity
Solicitation number: SPMYM223Q0661
Issued by: Defense Logistics Agency Land and Maritime

View the file

Other files for this federal contract opportunity

Other files attached to HEX HEAD SCREWS, newest first.
File	Type	Posted
SPMYM223Q0661 AMENDMENT.pdf	PDF	Feb 6, 2023
CDRL PACK.pdf	PDF	Feb 2, 2023

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SEE ADDENDUM

(No Collect Calls)

SPMYM223Q0661 02-Feb-2023

b. TELEPHONE NUMBER

360-813-9165

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 06 Feb 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

SPMYM29. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

RICHARD A. KEY

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

N4523A30257028

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

DLA MARITIME PUGET SOUND

ATTN: RICHARD KEY

467 W STREET

BREMERTON WA 98314

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N4523A 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

PUGET SOUND NAVAL SHIPYARD

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

TEL: 360-476-7640 FAX:

360-476-4121FAX:

TEL: 360-813-9165 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

332722

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF96

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

SPMYM223Q0661

Section SF 1449 - CONTINUATION SHEET

VENDOR INFORMATION

1. The Contractor’s POC is Phone:

Fax:

E-mail:

2. Buyer POC is Richard Key Phone: 360-813-9165 Fax:

E-mail: richard.key@dla.mil

3. Invoice Information:

The contractor shall utilize the electronic invoicing upon delivery of supplies indicated herein. Invoice may be submitted not more than one every two weeks. Invoices must be submitted electronically using Wide Area Work Flow (WAWF) – Receipt and Acceptance. The contractor shall self-register at the web site: https://wawf.eb.mil.

Contractor training is available on the Internet at https://wawftraining.eb.mil.

Additional support can be accessed by calling the NAVY WAWF Assistance Line: 1-877-251-9293.

See clause 252.232-7006 for WAWF table.

4. Inspection Level:

QA 2 45 days inspection

5. Defense Biometric Identification System (DBIDS):

Effective 14 August 2017, NCACS credentials will no longer be accepted for base access. Any new contractor, vendor or supplier requesting base access will be required to obtain a Defense Biometric Identification System (DBIDS) credential. NCACS credentials will no longer be issued. Only DBIDS credentials will be issued to ALL contractors, vendors and suppliers seeking base access AFTER 30 June 2017. Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions.

The system provides continuous vetting anytime the DBIDS card is scanned at an installation entry point.

If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential:

Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center (VCC) representative.

The VCC will pull up your information in the computer, ensuring all information is current and correct.

Once your information is validated, a temporary DBIDS credential is provided.

Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 180 days).

For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center.

The representative will enter base access authorization and then you may proceed to work.

If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

Present a letter or official document from any government sponsoring organization that provides the purpose for your access.

Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

Upon completion of the background check, the Visitor Control Center representative will complete the

DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

All deliveries must pass through the base Truck Inspection Station. All delivery vehicles are subject to inspection.

Drivers should expect delays due to heightened security.

For access to the main, perimeter gates at any Navy Base Kitsap installation, contractors are required to be a US Citizen and have either:

(a) DBIDS badge or

(b) Request a One-day Visitor badge at Pass & ID. Be prepared to present:

-Photo ID -Original proof of citizenship (any one of the following is acceptable):

State Certified Birth Certificate (must have the raised seal) Unexpired U.S. passport/Passport Card Alien Registration Card

Enhanced state-issued driver's license only accepted from Michigan, Minnesota, New York, Vermont, and Washington. Real ID licenses are not accepted at this time.

Naturalization papers Certificate/Statement of Birth Born Abroad)

-Current vehicle registration and insurance -Bill of lading that has the delivery address on it

Please note: The DBIDS badge does not give access through the second, Operational Area (OA) gate to lower base Bangor or to the Controlled Industrial Area (CIA) at Puget Sound Naval Shipyard (PSNS). To gain access to either the OA Gate or CIA area, a Navy Region Bangor or NAVSEA Badge is required.

To request a NAVY REGION NW badge, https://www.bavr.cnic.navy.mil/. Sponsor email is trina.williamson@navy.mil

To request a NAVSEA badge, call PSNS Pass & ID 360-476-4882.

FOR MORE INFORMATION VISIT: https://www.cnic.navy.mil/om/dbids.html

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1,800 Each

HEXAGON HEAD SCREW

FFP

1/2"-13UNC-2A X 2" LG, QQ-N-281, MIL-DTL-1222

M1222RN8C232NANN

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C232NANN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw, Type I, Grade 400, As Formed or Stress Relieved

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" Diameter, 2" Long

3. Thread series, and class of fit (see 3.9.1): 13UNC-2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): NA

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): NA

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MILSTD-

1684: NA

E. Type of coating and the minimum coating thickness for all internally-threaded fasteners, all externally-threaded fasteners with class 3A or 5 threads, and those externally-threaded fasteners with class 2A threads that need a thicker coating, when required: NA F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: NA G. When titanium alloy fasteners are to be coated with an inorganic coat: NA H. When cut or ground threads are not permitted: Permitted I. The tread series, when a nonstandard thread series is needed: NA J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: NA K. Is self locking element required? No If yes, specification type/class: Select one:

6.1 Intended use. Fasteners meeting this specification are intended for general, high temperature, high strength and corrosive environment applications where a high degree of reliability is required. It is designed to be used to acquire commercial off-the-shelf fasteners with added inspections to verify the high degree of reliability required. Fastener types and grades have been selected to meet diverse applications which include: elevated temperatures, immersion in sea water, salt air/marine environments, high preloads and high shock loadings.

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

NA (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements: None NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N4523A30257028

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

SIGNAL CODE: A

PSC CD: 5305

NET AMT

CONTRACT DATA REQUIREMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

FOR DETAILS

PURCHASE REQUEST NUMBER: N4523A30257028

0002AA 1 Each

CONTRACT DATA REQUIREMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT A, SEQUENCE A001, CLIN 0001

FOB: Destination

MILSTRIP: N4523A30257028

PURCHASE REQUEST NUMBER: N4523A30257028

0003 1,800 Each

1/2"-13UNC-2A X 2-1/4" LG, QQ-N-281, MIL-DTL-1222

M1222RN8C236NANN

MATERIAL ORDERING DATA

MIL-DTL-1222

IDN: 4523A 3025-7029

ICN: 5305LLS054806 KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C236NANN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw, Type I, Grade 400, As Formed or Stress Relieved

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" Diameter, 2-1/4" Long

3. Thread series, and class of fit (see 3.9.1): 13UNC-2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): NA

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): NA

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MILSTD-

1684: NA

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

NA (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

FOB: Destination

MILSTRIP: N4523A30257029

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIREMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0004AA 1 Each

CONTRACT DATA REQUIREMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT B, SEQUENCE B001, CLIN 0003

FOB: Destination

MILSTRIP: N4523A30257029

0005 8 Box

1/2"-13UNC-2A X 1" LG, QQ-N-281, MIL-DTL-1222, 100EA=1BX

M1222RN8C216NANN

MFR:

BOX=100 EACH

MATERIAL ORDERING DATA

MIL-DTL-1222

IDN: 4523A 3025-7902

ICN: NIIN: 01-372-0336 KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C224NANN

1. Configuration, Type, Style, Grade & Condition (see 1.2): SCREW, TY-I, GR- 400, As Formed or Stress Relieved.

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" DIA. X 1-1/2" LG

3. Thread series, and class of fit (see 3.9.1): 13UNC -2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see 1.2): N/A C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MILSTD- 1684: N/A E. Type of coating and the minimum coating thickness for all internally-threaded fasteners, all externally-threaded fasteners with class 3A or 5 threads, and those externally-threaded fasteners with class 2A threads that need a thicker coating, when required: N/A F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: N/A G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A H. When cut or ground threads are not permitted: Not Permitted I. The tread series, when a nonstandard thread series is needed: N/A J. Bearing surface of the bolt or nut, when a specific bearing surface is needed:

N/A K. Is self locking element required? No If yes, specification type/class: Select one:

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

N/A (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: Select one:

5. Magnetic permeability test: Select one:

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements:

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

NSN: 5305-01-351-4314

MILSTRIP: N4523A30257902

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIREMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0006AA 1 Each

CONTRACT DATA REQUIRMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT C, SEQUENCE C001, CLIN 0005

FOB: Destination

MILSTRIP: N4523A30257902

0007 900 Each

3/8"-16UNC-2A X 2" LG, QQ-N-281, MIL-DTL-1222

M1222RN6C232NANN

MFR:

MATERIAL ORDERING DATA

MIL-DTL-1222

IDN: 4523A 3025-7900

ICN: KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF

RELIABILITY IS REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN6C232NANN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw, Type I, Grade 400, As Formed or Stress Relieved

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 3/8" Diameter, 2" Long

3. Thread series, and class of fit (see 3.9.1): 16UNC-2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): NA

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): NA

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-STD-1684: NA E. Type of coating and the minimum coating thickness for all internally-threaded fasteners, all externally-threaded fasteners with class 3A or 5 threads, and those externally-threaded fasteners with class 2A threads that need a thicker coating, when required: NA F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: NA G. When titanium alloy fasteners are to be coated with an inorganic coat: NA H. When cut or ground threads are not permitted: Permitted I. The tread series, when a nonstandard thread series is needed: NA J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: NA K. Is self locking element required? No If yes, specification type/class: Select one:

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

NA (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements: None

FOB: Destination

MILSTRIP: N4523A30257900

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIREMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0008AA 1 Each

CONTRACT DATA REQUIRMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT D, SEQUENCE D001, CLIN 0007

FOB: Destination

MILSTRIP: N4523A30257900

0009 1,250 Each

1/2"-13UNC-2A X 1-1/2" LG, QQ-N-281, MIL-DTL-1222

M1222RN8C224NANN

MFR:

IDN: 4523A 3025-7903

ICN: NIIN: 01-372-0336 KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C224NANN

1. Configuration, Type, Style, Grade & Condition (see 1.2): SCREW, TY-I, GR- 400, As Formed or Stress Relieved.

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" DIA. X 1-1/2" LG

3. Thread series, and class of fit (see 3.9.1): 13UNC -2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see 1.2): N/A C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

N/A K. Is self locking element required? No If yes, specification type/class: Select one:

6.1 Intended use. Fasteners meeting this specification are intended for general, high with added inspections to verify the high degree of reliability required. Fastener types and grades have been selected to meet diverse applications which include: elevated temperatures, immersion in sea water, salt air/marine environments, high preloads and high shock loadings.

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

N/A (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: Select one:

5. Magnetic permeability test: Select one:

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements:

FOB: Destination

NSN: 5306-01-372-0336

MILSTRIP: N4523A30257903

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIRMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0010AA 1 Each

CONTRACT DATA REQUIRMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT E, SEQUENCE E001, CLIN 0009

FOB: Destination

MILSTRIP: N4523A30257903

0011 500 Each

1/2"-13UNC-2A X 2-1/2" LG, QQ-N-281, MIL-DTL-1222

M1222RN8C240NANN

IDN: 4523A 3027-7910

ICN: NIIN: 01-502-7342 KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C240NANN

1. Configuration, Type, Style, Grade & Condition (see 1.2): SCREW, TY-I, GR- 400, As Formed or Stress Relieved.

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" DIA. X 2-1/2" LG

3. Thread series, and class of fit (see 3.9.1): 13UNC -2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see 1.2): N/A C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

N/A K. Is self locking element required? No If yes, specification type/class: Select one:

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

N/A (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: Select one:

5. Magnetic permeability test: Select one:

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements:

FOB: Destination

NSN: 5305-01-502-7342

MILSTRIP: N4523A30277910

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIRMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0012AA 1 Each

CONTRACT DATA REQUIREMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT F, SEQUENCE F001, CLIN 0011

FOB: Destination

MILSTRIP: N4523A30277910

0013 700 Each

1/2"-13UNC-2A X 1-3/4" LG, QQ-N-281, MIL-DTL-1222

M1222RN8C228NANN

IDN: 4523A 3025-7904

ICN: NIIN: 01-508-2360 KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C228NANN

1. Configuration, Type, Style, Grade & Condition (see 1.2): SCREW, TY-I, GR- 400, As Formed or Stress Relieved.

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" DIA. X 1-3/4" LG

3. Thread series, and class of fit (see 3.9.1): 13UNC -2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see 1.2): N/A C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

N/A K. Is self locking element required? No If yes, specification type/class: Select one:

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

N/A (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: Select one:

5. Magnetic permeability test: Select one:

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements:

FOB: Destination

NSN: 5306-01-508-2360

MILSTRIP: N4523A30257904

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIRMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0014AA 1 Each

CONTRACT DATA REQUIREMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT G, SEQUENCE G001, CLIN 0013

FOB: Destination

MILSTRIP: N4523A30257904

0015 400 Each

1/2"-13UNC-2A X 3" LG, QQ-N-281, MIL-DTL-1222

M1222RN8C248NANN

MFR:

MATERIAL ORDERING DATA

MIL-DTL-1222

IDN: 4523A 3025-7032

ICN: 5305LLS054808 KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C248NANN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw, Type I, Grade 400, As Formed or Stress Relieved

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" Diameter, 3" Long

3. Thread series, and class of fit (see 3.9.1): 13UNC-2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): NA

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): NA

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MILSTD-

1684: NA

6.1 Intended use. Fasteners meeting this specification are intended for general, high temperature, high strength and corrosive environment applications where a high degree of reliability is required. It is designed to be used to acquire commercial off-the-shelf fasteners grades have been selected to meet diverse applications which include: elevated temperatures, immersion in sea water, salt air/marine environments, high preloads and high shock loadings.

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

NA (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements: None

FOB: Destination

MILSTRIP: N4523A30257032

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIRMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0016AA 1 Each

CONTRACT DATA REQUIREMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT H, SEQUENCE H001, CLIN 0015

FOB: Destination

MILSTRIP: N4523A30257932

0017 200 Each

1/2"-13UNC-2A X 4-1/2" LG, ASTM A449, MIL-DTL-1222

M1222RN8C272GFNZX

MATERIAL ORDERING DATA

MIL-DTL-1222

IDN: 4523A 3025-7031

ICN: 5305LLS054807 KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C272GFNZX

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw, Type I, Grade 5, Hardened and Tempered

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" Diameter, 4-1/2" Long

3. Thread series, and class of fit (see 3.9.1): 13UNC-2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): NA

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): NA

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MILSTD-

1684: NA

E. Type of coating and the minimum coating thickness for all internally-threaded fasteners, all externally-threaded fasteners with class 3A or 5 threads, and those externally-threaded fasteners with class 2A threads that need a thicker coating, when required: Zinc Coating F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: NA G. When titanium alloy fasteners are to be coated with an inorganic coat: NA H. When cut or ground threads are not permitted: Permitted I. The tread series, when a nonstandard thread series is needed: NA J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: NA K. Is self locking element required? No If yes, specification type/class: Select one:

6.1 Intended use. Fasteners meeting this specification are intended for general, high temperature, high strength and corrosive environment applications where a high degree of grades have been selected to meet diverse applications which include: elevated temperatures, immersion in sea water, salt air/marine environments, high preloads and high shock loadings.

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

NA (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements: None

FOB: Destination

MILSTRIP: N4523A30257031

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIRMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0018AA 1 Each

CONTRACT DATA REQUIREMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT J, SEQUENCE J001, CLIN 0017

FOB: Destination

MILSTRIP: N4523A30257031

0019 500 Each

1/2"-13UNC-2A X 1-1/4" LG, ASTM-F593, MIL-DTL-1222

M1222RN8C220SDNN

IDN: 4523A 3025-7907

ICN: 5305LLS054801 KO: KOI:

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS,

SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY

REQUIRED; dated 08 DEC 2020.

B. Part Number (see 3.14): M1222RN8C220SDNN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Screw, Type I, CRES 316, Solution Annealed & Cold Worked

a. Configuration for socket head cap screws style: N/A (ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 1/2" Diameter, 1-1/4" Long

3. Thread series, and class of fit (see 3.9.1): 13UNC-2A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): NA

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): NA

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MILSTD-

1684: NA

6.1 Intended use. Fasteners meeting this specification are intended for general, high temperature, high strength and corrosive environment applications where a high degree of grades have been selected to meet diverse applications which include: elevated temperatures, immersion in sea water, salt air/marine environments, high preloads and high shock loadings.

PER NSTM S9086-CJ-STM010 Chapter 75 Rev 5, para 075.3.2.2.1.2 (caution statement) this spec shall be used to procure all K-monel socket head capscrews.

MATERIAL ORDERING DATA

MIL-DTL-1222

L. Identification markings, when a nonstandard identification marking is needed:

NA (Per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT):

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: NO

Note to Engineer: If you select “yes”, specify additional requirements in the Additional Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional Data Requirements section.

Additional Data Requirements: None

FOB: Destination

MILSTRIP: N4523A30257907

PURCHASE REQUEST NUMBER: N4523A30257028

PROJECT: 606

CONTRACT DATA REQUIREMENTS LISTING

FFP

SEE ATTACHED CONTRACT DATA REQUIREMENTS LISTING (CDRL)

0020AA 1 Each

CONTRACT DATA REQUIREMENTS LISTING

FFP

CERTIFICATION DATA REPORT FOR CHEMICAL AND MECHANICAL

(PHYSICAL) PROPERTIES PER DI-MISC-82386

EXHIBIT K, SEQUENCE K001, CLIN 0019

FOB: Destination

MILSTRIP: N4523A30257907

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 N/A N/A N/A N/A 0002AA Destination Government Destination Government 0003 Destination Government Destination Government 0004 N/A N/A N/A N/A

0004AA N/A N/A N/A Government 0005 Destination Government Destination Government 0006 N/A N/A N/A N/A 0006AA N/A N/A N/A Government 0007 Destination Government Destination Government 0008 N/A N/A N/A N/A 0008AA N/A N/A N/A Government 0009 Destination Government Destination Government 0010 N/A N/A N/A N/A 0010AA N/A N/A N/A Government 0011 Destination Government Destination Government 0012 N/A N/A N/A N/A 0012AA N/A N/A N/A Government 0013 Destination Government Destination Government 0014 N/A N/A N/A N/A 0014AA N/A N/A N/A Government 0015 Destination Government Destination Government 0016 N/A N/A N/A N/A 0016AA N/A N/A N/A Government 0017 Destination Government Destination…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Feb 2, 2023.