REVISED SALIENT CHARACTERISTICS.docx

Salient Characteristics CCTV System Upgrade Building 1105 Parking Garage, 5 Floors

FOR CLIN 0001

The CCTV System overhaul includes replacement cameras for all locations currently in operation. The current system includes 18 camera views. The new system will have to have at least 18 cameras for one-to-one replacement. Additional cameras are needed for sustainment.

Cameras needed for installation include:

· Fixed dome (bullet and/or mini-dome) Requesting the following equipment:

· 1 each IPS08-D14-OI04

· 6 each IPS05-B12-OI03

· Alarm inputs/outputs

· Day/Night Capable

· Outdoor Rated IP67

· Field of View: 103°/74° (Standard), 25°/19° (Telephoto)

· Focal Length: 2.7-13.5mm, 13-55mm

· H.264, H.265

· MJPEG

· Imager: Progressive Scan RGB 1/2.7” CMOS

· Power over Ethernet+ (PoE+) IEEE 802.3at Class 4 (48V 0.38A); 24 VAC 1.27A 50/60Hz

· IK10 Vandal Resistant

· Onvif Profile S

· Quad Video Streams

· Wide Dynamic Range Dual Exposure, True WDR 110 dB Technologies

· Lens Type: Motorized Varifocal and Focus, P-Iris

· IR Distance: Up to 70m for outdoor model

· Warranty included

· 360 degree cameras with ceiling mounts (11 each IBPN-M-IS12-0)

· Alarm inputs/outputs

· True Day/Night capable

· Field of View: 90° / 55°

· Focal Length 2.8 mm

· H.264

· 4 x 4MP 1/3” CMOS Sensor

· MJPEG

· Onvif Profile S

· Outdoor Rated IP66

· Fixed Lens

· Minimum Illumination Color 0.41 Lux | B/W 0.022 Lux

· Max frame rate: 30 fps

· IK10 Vandal Resistant

· Triple Stream

· True Wide Dynamic Range

· Minimum Illumination Color 0.41 Lux, B/W 0.022 Lux

· Power over Ethernet (PoE+) IEEE 802.3at Type 2 Class 4, 12VDC

· TWDR (Multi-shutter)

· UL Listed (62368-1)

· NDAA Compliant

· Wide area coverage

· 4x4MP multidirectional camera heads for 360 coverage

· Independently set up the positioning, angle and rotation of each camera head

· Warranty included All cameras must have a mount (either ceiling, roof, or other depending on location/view) and mounting accessories.

· Requesting the following equipment:

· 1 each RHOLW All cameras must be compatible with current American Dynamics Victor video management system. Cameras that are not American Dynamics Illustra Pro require the purchase of licenses and updates to the currently running Network Video Recorder (NVR).

Licenses are required for equipment that will be added to the current AACS/CCTV system (C-Cure 9000/American Dynamics Victor Video Management Application).

A network switch must be purchased to provide connectivity of the system to the current AACS/CCTV network. Network Switches must be compatible with current infrastructure, and must be approved by C109.12 Network Engineering & Operations (for example, they only allow Cisco Certified network equipment on the AACS/CCTV network).

· Specifications for network switch (Part number: C9300-24S-A, plus support equipment):

· 24-port 1G SFP with modular uplinks, Network Advantage

· 24-port licenses

· 715W AC 80+ platinum Config 1 Power Supply

· 715W AC 80+ plat Config 1 Secondary PS

· 24-port Fiber Term Licenses

· 20 EACH 1000BASELX/LH SFP tr mod MMF/SMF 1310nm

· Network Plug-n-Play License for zero-touch device deployment Purchase of a virtual NVR (Part Number: ADVEVIRT), is required to provide connectivity of CCTV system to current network. Either American Dynamics proprietary virtual NVR or a compatible NVR is required. Associated equipment is also required: Transcoder (Part Number: TYCTRNSCDRA), and licenses for each camera (Part Number: ADVEC01).

· Requesting the following equipment:

· 1 each ADVEVIRT

· 1 each TYCTRNSCDRA

· 28 each ADVEC01 Cable management is required. Additional conduit and fittings will be required to retrofit new camera runs into existing infrastructure. Minimum amount to cover runs from basement up to 5th floor, and across floors. C/109.17 will perform all installation for this project. This request is for equipment only.

· ¾” EMT Conduit (500 ft)

· 2” Rigid Conduit (50 ft)

· Associated hardware, connectors, couplings, conduit bodies (LB,LL, LR, Straight), straps, weatherproof boxes/covers, etc. for each size:

· Requesting the following equipment

· 100 ea Compression Conduit Connector: Steel, 3/4 in Trade Size, 1 25/32 in Overall Length, Non-Insulated (part# 52AU57)(equivalent part is acceptable)

· 250 ea Compression Conduit Coupling: Steel, 3/4 in Trade Size, 2 5/32 in Overall Length, Blue/Gray, Rain Tight (part# 52AU79) (equivalent part is acceptable)

· 200 ea 3/4' Conduit 1, hole straps (part# E1S075) (equivalent part is acceptable)

· 50 ea 2" Rigid Conduit Coupler (part# 2CLP1) (equivalent part is acceptable)

· 11 ea 2" Aluminum Conduit Outlet Body, with cover and gasket (part# OC-6) (equivalent part is acceptable)

· 11 ea 2" Aluminum Conduit Outlet Cover Plate (part# OL-60) (equivalent part is acceptable)

· 11 ea 2" Aluminum Conduit Outlet Cover Plate Gasket (part# OL-6-RG) (equivalent part is acceptable) Cabling must be compatible with currently installed components, and additional equipment is needed to provide connectivity. Termination equipment is needed for C109.17 to install fiber optic cabling. Additional cabling/jumpers/equipment will be necessary to provide upgrades to the server cabinet and to provide onsite/offsite monitoring.

Vendor must provide deliver, material/equipment:

· Cat6 cabling and plugs – 6 different colors (black, blue, purple, pink, red, green) for identification, 2 reels of each color, 1000’ reels/boxes, and RJ-45 Plugs (min. 100 ea)

· Requesting 2000’ of each color of Cat6 cabling (2000’ of black, 2000’ of blue, 2000’ of purple, 2000’ of pink, 2000’ of red, 2000’ green).

· Requesting 100 ea Cat6 RJ-45 plugs (part number 85-366) (equivalent part is acceptable)

· 20 horizontal cable manager (part number WMPSE) to manage patch cables on any standard EIA 19 inch (483mm) rack or cabinet. Manages copper, fiber optic, and coax cables.

· 600 ea OM4 Duplex multimode fiber optic patch cables. Equal amounts of each size (1 meter, 3 meter, 4 meter, 5 meter, 7 meter, 8 meter). LC to LC termination.

· Requesting 100 of each length of patch cables. This would be 100 ea of the 3 meter patch cables, 100 ea of the 4 meter patch cables, 100 ea of the 5 meters patch cables, 100 ea of the 7 meter patch cables, 100 ea of the 8 meters in length. This will be 600 patch cables in total.

· Fiber optic cabling and termination supplies. Including fusion splicing supplies(2806032-01) , pigtail cassettes (CCH-CS12-A9-P00RE), Anaerobic LC connectors(95-201-98-SP), closet housings (CCH-CP24-B3), Wall Mount Housing for 4 CCH Panels (WCH-04P), and single mode riser rated 4-strand (S-OP-4-ND-G-3-BK-SIC-CUT REEL, minimum 5000ft to allow connection from building 1105 to infrastructure located inside CIA).

· This request is for supplies to perform fusion splicing. C/109.17 has a fusion splicer on hand, so the request is for the following equipment only:

· 4 pkgs (50 per pkg) 40mm heat-shrink fusion single-fiber splice protectors (part number 2806032‐01)

· 4 each pigtail cassettes (part number CCH‐CS12‐A9‐P00RE)

· 100 each Anaerobic LC connectors (part number 95‐201‐98‐SP)

· 4 each closet connector housings (part number CCH‐CP24‐B3)

· 1 each Wall Mount Housing (part number WCH‐04P)

· 5000 ft single mode riser rated 4‐strand (part number S‐OP‐4‐ND‐G‐3‐BK‐SIC‐CUT REEL)

· 40 each Single Mode Fiber Optic Patch Cables - 1 meter, LC to LC 1M LC-LC 9/125 DPX OS1/2 SM FBR-BLK (part number 33360) (equivalent part is acceptable)

Additional connectivity equipment includes:

· 20 ea Media Converter - 10/100/1000TX To 1000SX/LX Media Converter w/SFP Slot (Part Number: FCU-2805SFP)

· 40 ea Media Converter - SFP - LC Connector - 1000BASE-LX SFP TRANSCEIVER (Part Number: SFP-S10)

· 18 ea PoE Injectors- 90 Watt (Part number: IA-POE-90-U00-EU)

Additional monitoring/control equipment includes:

· Keyboards and licenses compatible with American Dynamics Victor video management system (3 ea AD2089, 6 ea ADVCPTZKEY1, 3 ea RS232 to USB adapter, 2 ea ADVC-SASVMK victor Enterprise SAS Add-on License, victor Client Virtual Matrix PTZ Keyboard Control).

· 4 Video Wall Monitors (Part Number: ADLCD43MB4K)

Salient Characteristics CCTV System Upgrade Naval Base Yokosuka Detachment Enclave

FOR CLIN 0002

The CCTV system overhaul includes replacement cameras for all locations currently installed, as well as additional locations requested by C/1120 Physical Security. The current system includes six cameras, and four additional views to be added. Additional cameras may be needed for sustainment.

Cameras needed for installation include:

· PTZ Network Camera (P/N: Q6128-E)

· CMOS Image Sensor size 1/2.3

· Outdoor Ready

· IR Capable

· Color and B/W Illumination

· IK08 Vandal Rating

· IP66 IP rating

· Day and Night functionality

· Electronic image stabilization

· Focal length 3.9 - 46.8 mm

· Horizontal field of view 70.7 - 6.2 °

· Vertical field of view 43.5 - 3.5 °

· 360 endless pan range

· Tilt range+20 to -90

· Optical zoom, 12

· Digital zoom, 12

· PoE Class 4

· 4K resolution at 30 fps

· Sharpdome technology

· Electronic image stabilization

· Pan performance up to 700°/s

· 5 year warranty Licenses may be needed to add these cameras to the video management system in current operation (American Dynamics Victor video management system).

Additional equipment for camera installation includes mounts (P/N: T91L61), mounting hardware, and midspan PoE Injectors (P/N: T8134) for each camera.

Unusual camera mounting installations require the following equipment:

· Parapet Mount, 2 each (P/N: TQ6501-E)

· Conduit Adapter 3/4" U-Shape 30 mm, 2 each (P/N: 5505-191)

· Conduit Adapter 3/4″ NPS, 2 pcs, 2 each (P/N: 5505-641)

· Steel Straps, 12 each (P/N: TX30) Additional installation infrastructure required for installation include the following:

· Unistrut Channel, 1 5/8-IN. X 1 5/8-IN., 9/16-IN. X 1 1/8-IN. SLOTTED HOLES, 14 GA (200 ft total)

· Flexible Conduit, ¾ IN x 50 ft (P/N: LA1250) (250 ft total)

· CAT5e Stranded Bulk Cable (P/N: A7J304-1000-PUR) (3000 ft total)

· Non-metallic, white, 1-piece hinged, low-voltage surface raceway with adhesive backing. Raceway is 8 ft. L x 1.01 W x 0.58 in. H (P/N: LD5IW8-A) (96 ft total)

· Tee fitting for use with LD5, LDPH5, and LDS5 raceway, ABS, 65.5mm x 102.6mm x 16.3mm, White (P/N: TFC5IW-X) (10 total)

· Right Angle Fitting, Non Metallic Raceway, Type LD5, Height (In.) 0.58 Width (In.) 2 Length (In.) 2, Color: White, Material of Construction PVC Mounting Snap On Connection (P/N: RAF5IWE) (15 each)