19-Q-0442.docx

SPMYM219Q0442

Section SF 30 - BLOCK 14 CONTINUATION PAGE

CLAUSES INCORPORATED BY FULL TEXT

1. The Contractor’s POC is

2. Buyer POC is THOMAS TREPANIER

3. Invoice Information:

The contractor shall utilize the electronic invoicing upon delivery of supplies indicated herein. Invoice may be submitted not more than one every two weeks. Invoices must be submitted electronically using Wide Area Work Flow (WAWF) – Receipt and Acceptance. The contractor shall self-register at the web site: https://wawf.eb.mil. Contractor training is available on the Internet at https://wawftraining.eb.mil.

Additional support can be accessed by calling the NAVY WAWF Assistance Line: 1-877-251-9293.

See clause 252.232-7006 for WAWF table.

4. Inspection Level:

QA 4 7 days inspection

5. Defense Biometric Identification System (DBIDS):

Effective 14 August 2017, NCACS credentials will no longer be accepted for base access. Any new contractor, vendor or supplier requesting base access will be required to obtain a Defense Biometric Identification System (DBIDS) credential. NCACS credentials will no longer be issued. Only DBIDS credentials will be issued to ALL contractors, vendors and suppliers seeking base access AFTER 30 June 2017. Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions. The system provides continuous vetting anytime the DBIDS card is scanned at an installation entry point.

If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential:

· Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center (VCC) representative.

· The VCC will pull up your information in the computer, ensuring all information is current and correct.

· Once your information is validated, a temporary DBIDS credential is provided.

· Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 180 days).

· For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center.

· The representative will enter base access authorization and then you may proceed to work.

If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

· Present a letter or official document from any government sponsoring organization that provides the purpose for your access.

· Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

· Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

· Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

All deliveries must pass through the base Truck Inspection Station. All delivery vehicles are subject to inspection. Drivers should expect delays due to heightened security.

For access to the main, perimeter gates at any Navy Base Kitsap installation, contractors are required to be a US Citizen and have either:

(a) DBIDS badge or

(b) Request a One-day Visitor badge at Pass & ID. Be prepared to present:

-Photo ID -Original proof of citizenship (any one of the following is acceptable):

-Current vehicle registration and insurance -Bill of lading that has the delivery address on it

Please note: The DBIDS badge does not give access through the second, Operational Area (OA) gate to lower base Bangor or to the Controlled Industrial Area (CIA) at Puget Sound Naval Shipyard (PSNS). To gain access to either the OA Gate or CIA area, a Navy Region Bangor or NAVSEA Badge is required.

To request a NAVY REGION NW badge, https://www.bavr.cnic.navy.mil/. Sponsor email is jennifer.way@dla.mil

To request a NAVSEA badge, call PSNS Pass & ID 360-476-4882.

FOR MORE INFORMATION VISIT: https://www.cnic.navy.mil/om/dbids.html

Section SF 1449 - CONTINUATION SHEET

JACKET MENS - S

FFP

BRAND NAME OR EQUAL TO PORT AUTHORITY MEN'S ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING, W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: SMALL

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83080961

PURCHASE REQUEST NUMBER: N4523A83080961

PROJECT: 6X3

PSC CD: 8405

NET AMT

JACKET MENS - M

BRAND NAME OR EQUAL TO PORT AUTHORITY MEN'S ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING, W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: MEDIUM

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83080962

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET MENS - L

BRAND NAME OR EQUAL TO PORT AUTHORITY MEN'S ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING, W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: LARGE

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83080963

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET MENS - XL

BRAND NAME OR EQUAL TO PORT AUTHORITY MEN'S ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING, W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: XL

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83080964

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET MENS - 2XL

BRAND NAME OR EQUAL TO PORT AUTHORITY MEN'S ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING, W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: 2XL

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83080965

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET LADY - S

BRAND NAME OR EQUAL TO PORT AUTHORITY LADIES ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS

- AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- AND BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: SMALL

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83090961

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - M

BRAND NAME OR EQUAL TO PORT AUTHORITY LADIES ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS

- AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- AND BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: MEDIUM

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83090962

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - L

BRAND NAME OR EQUAL TO PORT AUTHORITY LADIES ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS

- AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- AND BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: LARGE

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83090963

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - XL

BRAND NAME OR EQUAL TO PORT AUTHORITY LADIES ENDEAVOR JACKET

- 100% POLYESTER TWILL WITH PU COATING

- MESH UPPER BODY LINING W/NYLON LOWER BODY AND SLEEVE LINING

- 2 WAY ZIPPER WITH ERGONOMIC PULL

- INSIDE CHEST POCKET TWO SIDE POCKETS

- AJUSTABLE TAB CUFFS W/HOOK AND LOOP CLOSURES

- AND BOTTOM HEM TOGGLE ADJUSTMENT

- JACKET COLOR BLACK/GUN METAL

- SIZE: XL

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR TO MATCH SLEEVE HIGHLIGHT (BLACK)

- 28PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83090964

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - BL - S

BRAND NAME OR EQUAL TO DICKIES 12 OZ BLANKET LINED JACKET WITH CORDUROY WITH CORDUROY COLLAR.

- ZIP FRONT CHEST POCKET

- BI-SWING BACK

- ADJUSTABLE WAIST TABS

- TWO HAND WARMER POCKETS

- INSIDE POCKET

- TRIPLE NEEDLE FELLED SEAM CONSTRUCTION

- WATER REPELLENT FINISH

- HIGH PERFORMANCE DUCK EXTERIOR

- LINING: 65 PERCENT ACRYLIC/ 35 PERCENT POLYESTER

- SLEEVE LINING: 6 OZ. POLYESTER FILL QUILTED TO NYLON TAFFETA

- JACKET COLOR: BLACK

- SIZE: SMALL

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR GOLD - 30PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83100961

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - BL - M

BRAND NAME OR EQUAL TO DICKIES 12 OZ BLANKET LINED JACKET WITH CORDUROY WITH CORDUROY COLLAR.

- ZIP FRONT CHEST POCKET

- BI-SWING BACK

- ADJUSTABLE WAIST TABS

- TWO HAND WARMER POCKETS

- INSIDE POCKET

- TRIPLE NEEDLE FELLED SEAM CONSTRUCTION

- WATER REPELLENT FINISH

- HIGH PERFORMANCE DUCK EXTERIOR

- LINING: 65 PERCENT ACRYLIC/ 35 PERCENT POLYESTER

- SLEEVE LINING: 6 OZ. POLYESTER FILL QUILTED TO NYLON TAFFETA

- JACKET COLOR: BLACK

- SIZE: MEDIUM

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR GOLD - 30PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83100962

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - BL - L

BRAND NAME OR EQUAL TO DICKIES 12 OZ BLANKET LINED JACKET WITH CORDUROY WITH CORDUROY COLLAR.

- ZIP FRONT CHEST POCKET

- BI-SWING BACK

- ADJUSTABLE WAIST TABS

- TWO HAND WARMER POCKETS

- INSIDE POCKET

- TRIPLE NEEDLE FELLED SEAM CONSTRUCTION

- WATER REPELLENT FINISH

- HIGH PERFORMANCE DUCK EXTERIOR

- LINING: 65 PERCENT ACRYLIC/ 35 PERCENT POLYESTER

- SLEEVE LINING: 6 OZ. POLYESTER FILL QUILTED TO NYLON TAFFETA

- JACKET COLOR: BLACK

- SIZE: LARGE

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR GOLD - 30PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83100963

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - BL - XL

BRAND NAME OR EQUAL TO DICKIES 12 OZ BLANKET LINED JACKET WITH CORDUROY WITH CORDUROY COLLAR.

- ZIP FRONT CHEST POCKET

- BI-SWING BACK

- ADJUSTABLE WAIST TABS

- TWO HAND WARMER POCKETS

- INSIDE POCKET

- TRIPLE NEEDLE FELLED SEAM CONSTRUCTION

- WATER REPELLENT FINISH

- HIGH PERFORMANCE DUCK EXTERIOR

- LINING: 65 PERCENT ACRYLIC/ 35 PERCENT POLYESTER

- SLEEVE LINING: 6 OZ. POLYESTER FILL QUILTED TO NYLON TAFFETA

- JACKET COLOR: BLACK

- SIZE: XL

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR GOLD - 30PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83100964

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - BL - 2XL

BRAND NAME OR EQUAL TO DICKIES 12 OZ BLANKET LINED JACKET WITH CORDUROY WITH CORDUROY COLLAR.

- ZIP FRONT CHEST POCKET

- BI-SWING BACK

- ADJUSTABLE WAIST TABS

- TWO HAND WARMER POCKETS

- INSIDE POCKET

- TRIPLE NEEDLE FELLED SEAM CONSTRUCTION

- WATER REPELLENT FINISH

- HIGH PERFORMANCE DUCK EXTERIOR

- LINING: 65 PERCENT ACRYLIC/ 35 PERCENT POLYESTER

- SLEEVE LINING: 6 OZ. POLYESTER FILL QUILTED TO NYLON TAFFETA

- JACKET COLOR: BLACK

- SIZE: 2XL

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR GOLD - 30PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83100965

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - S - FLEX

BRAND NAME OR EQUAL TO DICKIES FLEX SANDED DUCK MOBILITY COAT PART NUMBER TC476

- COLOR: BLACK

- SIZE: SMALL

- 9.8 OZ DUCK

- 98 PERCENT COTTON/2% SPANDE

- INTERIOR POCKETS

- DURABLE WATER REPELLENT

- BI-SWING BACK

- STRECTCH SHERPA FLEECE LINING

- REINFORCED CUFFS

- CORDUROY COLLAR.

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR: GOLD

- 30 PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83110961

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - M FLEX

BRAND NAME OR EQUAL TO DICKIES FLEX SANDED DUCK MOBILITY COAT PART NUMBER TC476

- COLOR: BLACK

- SIZE: MEDIUM

- 9.8 OZ DUCK

- 98 PERCENT COTTON/2% SPANDE

- INTERIOR POCKETS

- DURABLE WATER REPELLENT

- BI-SWING BACK

- STRECTCH SHERPA FLEECE LINING

- REINFORCED CUFFS

- CORDUROY COLLAR.

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR: GOLD

- 30 PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83110962

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - L FLEX

BRAND NAME OR EQUAL TO DICKIES FLEX SANDED DUCK MOBILITY COAT PART NUMBER TC476

- COLOR: BLACK

- SIZE: LARGE

- 9.8 OZ DUCK

- 98 PERCENT COTTON/2% SPANDE

- INTERIOR POCKETS

- DURABLE WATER REPELLENT

- BI-SWING BACK

- STRECTCH SHERPA FLEECE LINING

- REINFORCED CUFFS

- CORDUROY COLLAR.

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR: GOLD

- 30 PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83110963

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - XL FLEX

BRAND NAME OR EQUAL TO DICKIES FLEX SANDED DUCK MOBILITY COAT PART NUMBER TC476

- COLOR: BLACK

- SIZE: XL

- 9.8 OZ DUCK

- 98 PERCENT COTTON/2% SPANDE

- INTERIOR POCKETS

- DURABLE WATER REPELLENT

- BI-SWING BACK

- STRECTCH SHERPA FLEECE LINING

- REINFORCED CUFFS

- CORDUROY COLLAR.

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR: GOLD

- 30 PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83110964

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - 2 XL FLEX

BRAND NAME OR EQUAL TO DICKIES FLEX SANDED DUCK MOBILITY COAT PART NUMBER TC476

- COLOR: BLACK

- SIZE: 2XL

- 9.8 OZ DUCK

- 98 PERCENT COTTON/2% SPANDE

- INTERIOR POCKETS

- DURABLE WATER REPELLENT

- BI-SWING BACK

- STRECTCH SHERPA FLEECE LINING

- REINFORCED CUFFS

- CORDUROY COLLAR.

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR: GOLD

- 30 PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83110965

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

JACKET - 3XL FLEX

BRAND NAME OR EQUAL TO DICKIES FLEX SANDED DUCK MOBILITY COAT PART NUMBER TC476

- COLOR: BLACK

- SIZE: 3XL

- 9.8 OZ DUCK

- 98 PERCENT COTTON/2% SPANDE

- INTERIOR POCKETS

- DURABLE WATER REPELLENT

- BI-SWING BACK

- STRECTCH SHERPA FLEECE LINING

- REINFORCED CUFFS

- CORDUROY COLLAR.

- LOGO: TO BE EMBRIODERED ON LEFT CHEST AT STANDARD POCKET HEIGHT

- COLOR: GOLD

- 30 PT TIMES NEW ROMAN ON 2 LINES AS SHOWN BELOW

PSNS & IMF

PDQ

Bidding On:

Manufacturer's Name: __________________________________________ Brand_______________________________________________________ No: _________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE. PLEASE QUOTE BEST POSSIBLE DELIVERY.

FOB: Destination

MILSTRIP: N4523A83110966

PURCHASE REQUEST NUMBER: N4523A83080961

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

360-476-7640 FOB: Destination N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

N4523A

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must--

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by--

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)

The Contractor is responsible for the delivery of each item quantity within allowable variations, if any. If the Contractor delivers and the Government receives quantities of any item in excess of the quantity called for (after considering any allowable variation in quantity), such excess quantities will be treated as being delivered for the convenience of the Contractor. The Government may retain such excess quantities up to $250 in value without compensating the Contractor therefor, and the Contractor waives all right, title, or interests therein. Quantities in excess of $250 will, at the option of the Government, either be returned at the Contractor's expense or retained and paid for by the Government at the contract unit price.

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(Contracting Officer shall insert the significant evaluation factors, such as (i) technical capability of the item offered to meet the Government requirement; (ii) price; (iii) past performance (see FAR 15.304); and include them in the relative order of importance of the evaluation factors, such as in descending order of importance.)

Technical and past performance, when combined, are . (Contracting Officer state, in accordance with FAR 15.304, the relative importance of all other evaluation factors, when combined, when compared to price.)

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2017) ALTERNATE I (OCT 2014)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

(a) Definitions. As used in this provision-- “Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

“Sensitive technology”—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___ . [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ .] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ___ ] is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.)

[The offeror shall check the category in which its ownership falls]:

___ Black American.

___ Hispanic American.

___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).

___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).

___ Individual/concern, other than one of the preceding.

(d)…