SPMYM2-18-Q-2566.pdf

SEE ADDENDUM

(No Collect Calls)

SPMYM218Q2566 04-May-2018

b. TELEPHONE NUMBER

360-476-5881

8. OFFER DUE DATE/LOCAL TIME

06:00 AM 18 May 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

SPMYM29. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

SUSAN M. PETERSON

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

N4523A80653341

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

DLA MARITIME PUGET SOUND

ATTN: SUE PETERSON

467 W STREET

BREMERTON WA 98314-5100

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS AX

13b. RATING

DO-C9E

CODE15. DELIVER TO CODE N4523A 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

PUGET SOUND NAVAL SHIPYARD

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

TEL: 360-476-7640 FAX:

360-476-4121FAX:

TEL: 360-476-5881

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,250

NAICS:

333992

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF90

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

SPMYM218Q2566

Section SF 30 - BLOCK 14 CONTINUATION PAGE

CLAUSES INCORPORATED BY FULL TEXT

1. The Contractor’s POC is

Phone:

Fax:

E-mail:

2. Buyer POC is: SUSAN PETERSON

Phone: 360-476-5881

Fax:

E-mail: SUSAN.PETERSON@DLA.MIL

3. Invoice Information:

The contractor shall utilize the electronic invoicing upon delivery of supplies indicated herein. Invoice may be submitted not more than one every two weeks. Invoices must be submitted electronically using Wide Area Work

Flow (WAWF) – Receipt and Acceptance. The contractor shall self-register at the web site: https://wawf.eb.mil.

Contractor training is available on the Internet at https://wawftraining.eb.mil.

Additional support can be accessed by calling the NAVY WAWF Assistance Line: 1-877-251-9293.

See clause 252.232-7006 for WAWF table.

4. Inspection Level:

QA 4 7 days inspection

5. Defense Biometric Identification System (DBIDS):

Effective 14 August 2017, NCACS credentials will no longer be accepted for base access. Any new contractor, vendor or supplier requesting base access will be required to obtain a Defense Biometric Identification System

(DBIDS) credential. NCACS credentials will no longer be issued. Only DBIDS credentials will be issued to ALL contractors, vendors and suppliers seeking base access AFTER 30 June 2017. Defense Biometric Identification

System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions.

The system provides continuous vetting anytime the DBIDS card is scanned at an installation entry point.

If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a

DBIDS credential:

Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor

Control Center (VCC) representative.

The VCC will pull up your information in the computer, ensuring all information is current and correct.

Once your information is validated, a temporary DBIDS credential is provided.

Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 180 days).

https://wawf.eb.mil/ https://wawftraining.eb.mil/

For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control

Center.

The representative will enter base access authorization and then you may proceed to work.

If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

Present a letter or official document from any government sponsoring organization that provides the purpose for your access.

Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

Upon completion of the background check, the Visitor Control Center representative will complete the

DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

All deliveries must pass through the base Truck Inspection Station. All delivery vehicles are subject to inspection.

Drivers should expect delays due to heightened security.

For access to the main, perimeter gates at any Navy Base Kitsap installation, contractors are required to be a US

Citizen and have either:

(a) DBIDS badge or

(b) Request a One-day Visitor badge at Pass & ID. Be prepared to present:

-Photo ID

-Original proof of citizenship (any one of the following is acceptable):

State Certified Birth Certificate (must have the raised seal)

Unexpired U.S. passport/Passport Card

Alien Registration Card

State Issued ENHANCED Drivers License

Naturalization papers

Certificate/Statement of Birth Born Abroad)

-Current vehicle registration and insurance

-Bill of lading that has the delivery address on it

Please note: The DBIDS badge does not give access through the second, Operational Area (OA) gate to lower base

Bangor or to the Controlled Industrial Area (CIA) at Puget Sound Naval Shipyard (PSNS). To gain access to either the OA Gate or CIA area, a Navy Region Bangor or NAVSEA Badge is required.

To request a NAVY REGION NW badge, https://www.bavr.cnic.navy.mil/. Sponsor email is jennifer.way@dla.mil

To request a NAVSEA badge, call PSNS Pass & ID 360-476-4882.

FOR MORE INFORMATION VISIT: https://www.cnic.navy.mil/om/dbids.html https://www.bavr.cnic.navy.mil/ mailto:jennifer.way@dla.mil https://www.cnic.navy.mil/om/dbids.html

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each

INDUCTION BLANKET

FFP

44 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

PRO HEAT 35 AIR COOLED SYSTEM

MF: MILLER ELECTRIC P/N 300079 OR EQUAL

IN ACCORDANCE WITH SPECIFICATIONS BELOW

Must be air cooled system

Must be capable of preheat temperatures of 400 degrees F (204 degrees C)

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 10.75 inch (27 cm) pipe, 11.3 x 44 inch (29cm x 112cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring new training for operators, or alteration of existing welding process instructions

Any "or equal" may require to provide a non-returnable sample

Bidding On:

Manufacturer's Name:__________________________________________

Brand_______________________________________________________

No:_________________________________________________________

OFFERS OF AN OR EQUAL OFFERS PRODUT MUST SUBMIT TECHNICAL

INFORMATION AND COMPLIANCE OF SPECIFICATIONS WITH QUOTE

TO BE CONSIDERED RESPONSIVE.

FAILURE TO PROVIDE THE ENTIRE, COMPLETED,AND SIGNED

SOLICITATION PACKAGE TO INCLUDE ALL CERTIFICATIONS AND

SUBMITTALS WILL RESULT IN YOUR OFFER BEING CONSIDERED NON-

RESPONSIVE

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: N4523A80653341

PURCHASE REQUEST NUMBER: N4523A80653341

PROJECT: 6X6

SIGNAL CODE: A

NET AMT

0002 1 Each

INDUCTION BLANKET

FFP

40 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300080 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 8.625 inch (22 cm) pipe, 13.1 x 40 inch (33 cm x 102 cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80653342

PURCHASE REQUEST NUMBER: N4523A80653341

0003 1 Each

INDUCTION BLANKET

FFP

47 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N 300078 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 12 inch (31 cm) pipe, 10.1 x 47 inch (119cm x 26cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80653343

PURCHASE REQUEST NUMBER: N4523A80653341

0004 1 Each

INDUCTION BLANKET

FFP

53 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300077 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 14 inch (36 cm) pipe, 10.1 x 53 inch (134cm x 26cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80653344

PURCHASE REQUEST NUMBER: N4523A80653341

0005 1 Each

INDUCTION BLANKET

FFP

60 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300075 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 16 inch (41 cm) pipe, 60 x 10.1 inch (152cm x 26cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80653345

PURCHASE REQUEST NUMBER: N4523A80653341

0006 1 Each

INDUCTION BLANKET

FFP

66 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 3000074 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 18 inch (46 cm) pipe, 66 x 9.0 inch (168cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80653346

PURCHASE REQUEST NUMBER: N4523A80653341

0007 1 Each

INDUCTION BLANKET

FFP

72 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300073 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 20 inch (51 cm) pipe, 72 x 9.0 inch (183cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80653347

PURCHASE REQUEST NUMBER: N4523A80653341

0008 1 Each

INDUCTION BLANKET

FFP

78 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MF: MILLER ELECTRIC P/N 300072 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 22 inch (56 cm) pipe, 78 x 9.0 inch (198cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80653348

PURCHASE REQUEST NUMBER: N4523A80653341

0009 1 Each

INDUCTION BLANKET

FFP

85 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300071 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 24 inch (61 cm) pipe, 85 x 9.0 inch (216cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80653349

MFR PART NR: 300079

PURCHASE REQUEST NUMBER: N4523A80653341

0010 1 Each

INDUCTION BLANKET

FFP

91 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300070 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 26 inch (66 cm) pipe, 91 x 9.0 inch (231cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663340

PURCHASE REQUEST NUMBER: N4523A80653341

0011 1 Each

INDUCTION BLANKET

FFP

97 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300069 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 28 inch (71 cm) pipe, 97 x 9.0 inch (246cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663341

PURCHASE REQUEST NUMBER: N4523A80653341

0012 1 Each

INDUCTION BLANKET

FFP

104 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300068 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 30 inch (76 cm) pipe, 104 x 9.0 inch (264Cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663342

PURCHASE REQUEST NUMBER: N4523A80653341

0013 1 Each

INDUCTION BLANKET

FFP

110 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300067 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 32 inch (81 cm) pipe, 110 x 9.0 inch (279cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663343

PURCHASE REQUEST NUMBER: N4523A80653341

0014 1 Each

INDUCTION BLANKET

FFP

116 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300066 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 34 inch (86 cm) pipe, 116 x 9.0 inch (295cm x 23cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663344

PURCHASE REQUEST NUMBER: N4523A80653341

0015 1 Each

INDUCTION BLANKET

FFP

122 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

PRO HEAT 35 AIR COOLED SYSTEM MILLER ELECTRIC P/N: OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 36 inch (91 cm) pipe, 122 x 7.5 inch (310cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663345

PURCHASE REQUEST NUMBER: N4523A80653341

0016 1 Each

INDUCTION BLANKET

FFP

129 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300064 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 38 inch (97 cm) pipe, 129 x 7.5 inch (328cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663346

PURCHASE REQUEST NUMBER: N4523A80653341

0017 1 Each

INDUCTION BLANKET

FFP

135 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300087 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 40 inch (102 cm) pipe, 135 x 7.5 inch (343cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663347

PURCHASE REQUEST NUMBER: N4523A80653341

0018 1 Each

INDUCTION BLANKET

FFP

141 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300063 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 42 inch (107 cm) pipe, 141 x 7.5 inch (358cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663348

MFR PART NR: 300079

PURCHASE REQUEST NUMBER: N4523A80653341

0019 1 Each

INDUCTION BLANKET

FFP

154 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300062 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 46 inch (117 cm) pipe, 154 x 7.5 inch (391cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80663349

MFR PART NR: 300079

PURCHASE REQUEST NUMBER: N4523A80653341

0020 1 Each

INDUCTION BLANKET

FFP

160 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 30061 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 48 inch (122 cm) pipe, 160 x 7.5 inch (406cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80673341

MFR PART NR: 300079

PURCHASE REQUEST NUMBER: N4523A80653341

0021 1 Each

INDUCTION BLANKET

FFP

173 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300060 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 52 inch (132 cm) pipe, 173 x 7.5 inch (439cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80673342

MFR PART NR: 300079

PURCHASE REQUEST NUMBER: N4523A80653341

0022 1 Each

INDUCTION BLANKET

FFP

185 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 224584 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 56 inch (142 cm) pipe, 185 x 7.5 inch (470cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80673343

MFR PART NR: 300079

PURCHASE REQUEST NUMBER: N4523A80653341

0023 1 Each

INDUCTION BLANKET

FFP

197 INCH INDUCTION BLANKET

MUST BE COMPITABLE WITH THE 460-575 V, 3-PHASE, 60 HZ MILLER

MILLER ELECTRIC P/N: 300336 OR EQUAL

Must be able to conform to circular and flat parts/materials needing preheat

Must be manufactured of high temperature flexible materials

Must be able fit 60 inch (152 cm) pipe, 197 x 7.5 inch (500cm x 19cm)

Must work with 460-575V, 3-phase, 60 HZ power source with rated output of

35KW at 100% duty cycle

Any "or equal" submissions must comply with all shipyard electrical welding equipment requirements without equipment modification

Any "or equal" equipment must be able to be put into service without requiring

MILSTRIP: N4523A80673344

MFR PART NR: 300079

PURCHASE REQUEST NUMBER: N4523A80653341

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

0004 Destination Government Destination Government

0005 Destination Government Destination Government

0006 Destination Government Destination Government

0007 Destination Government Destination Government

0008 Destination Government Destination Government

0009 Destination Government Destination Government

0010 Destination Government Destination Government

0011 Destination Government Destination Government

0012 Destination Government Destination Government

0013 Destination Government Destination Government

0014 Destination Government Destination Government

0015 Destination Government Destination Government

0016 Destination Government Destination Government

0017 Destination Government Destination Government

0018 Destination Government Destination Government

0019 Destination Government Destination Government

0020 Destination Government Destination Government

0021 Destination Government Destination Government

0022 Destination Government Destination Government

0023 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 28-SEP-2018 1 PUGET SOUND NAVAL SHIPYARD

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

360-476-7640

N4523A

0002 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0003 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0004 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0005 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0006 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0007 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0008 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0009 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0010 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0011 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0012 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0013 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0014 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0015 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0016 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0017 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0018 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0019 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0020 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0021 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0022 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

0023 28-SEP-2018 1 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2016

52.204-13 System for Award Management Maintenance OCT 2016

52.204-16 Commercial and Government Entity Code Reporting JUL 2016

52.204-18 Commercial and Government Entity Code Maintenance JUL 2016

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

NOV 2015

52.212-1 Instructions to Offerors--Commercial Items JAN 2017

52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017

52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

OCT 2015

52.232-1 Payments APR 1984

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.243-1 Changes--Fixed Price AUG 1987

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.204-7004 Alt A System for Award Management Alternate A FEB 2014

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.225-7001 Buy American And Balance Of Payments Program-- Basic

(Dec 2017)

DEC 2017

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017

252.225-7048 Export-Controlled Items JUN 2013

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.247-7023 Transportation of Supplies by Sea APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016)

(a) Definitions. As used in this provision--

Commercial and Government Entity (CAGE) code means—

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics

Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity;

or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA

Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

(b) The Offeror represents that it [ ___ ] has or [ ___ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates ``has'' in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code:

Immediate owner legal name: ___

(Do not use a ``doing business as'' name)

Is the immediate owner owned or controlled by another entity?:

[ ___ ] Yes or [ ___ ] No.

(d) If the Offeror indicates ``yes'' in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code:

Highest-level owner legal name:

(Do not use a ``doing business as'' name)

(End of provision)

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must--

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by--

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2017)

ALTERNATE I (OCT 2014)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

(a) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or https://www.sam.gov/portal

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

“Sensitive technology”—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act

(50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least

51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the

United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___ . [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the

United States or its outlying areas. Check all that apply.

https://www.acquisition.gov/

(1) Small business concern. The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB

Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each

WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB

Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ .] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ___ ] is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the

List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.)

[The offeror shall check the category in which its ownership falls]:

___ Black American.

___ Hispanic American.

___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea),…