SPMYM2-22-Q-2514 (SALIENT CHARACTERISTICS) SURFACE GRINDER.pdf
PDF 99 KB Posted
- Attached to
- SURFACE GRINDER Federal contract opportunity
- Solicitation number
- SPMYM2-22-Q-2514
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-22-Q-2514 (SOLICITATION) SURFACE GRINDER.pdf | ||
| SPMYM2-22-Q-2514 (CDRLS) SURFACE GRINDER.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS FOR
CLINS 0001 THRU 0006
High precision manual surface grinding machine 6 x 18 inch
Mitsui Hi-Tech Model 205MH or equivalent
The surface grinding machine shall not exceed:
Weight, pounds 2,100
Width, inches 70
Depth, inches 40
Table Height, inches 40 from floor
Total Height, inches 72
The surface grinder shall meet the following specifications:
Table surface shall be at least 6” x 19” but not more than 7” x 20”
Table movement shall be at least 8” x 20”
Grinding wheel height shall be at least 18” from table.
Longitudinal feed 4” per revolution of hand wheel
Cross feed .1” per revolution of hand wheel
Vertical feed .05” per revolution of hand wheel
Cross feed hand wheel dial graduation .001”
Vertical feed hand wheel dial graduation .0001”
Grinding wheel size 8” x .75” x 1.25”
Spindle speed 3460 rpm
Spindle motor 1.33 HP
Power 3 phase 220V, 1.5 KVA, +/- 10%
The following standard accessories shall be provided:
Wheel adapter with puller
Jack bolts and base plates
Metric hand tool
Instruction manual
The grinding machine shall have the following:
Short casting head
Automatic lubrication
Oil bath system
Vertical ways shall be anti-friction hardened and ground steel with automatic lubrication
Table ways shall be removable D2 hardened and ground steel
Longitudinal table movement shall be on linear ball bearings between 3 vee ways and 1 flat way
Cross table movement shall be on double 90 degree vee ways
Spindle shall be removable cartridge type heavy duty with two sets of double row angular contacts and super precision ball bearings
Spindle motor shall be a dynamic balanced motor
Hand wheels shall be zero-setting slip-rings with verniers
Installed OS Walker Ceramax Fine Division Permanent Magnetic Chuck, 6" x 18”
Installed Magnescale LH Series Display, 2-axis cross and vertical feeds, digital readout system
National Recognized Testing Laboratory (NRTL) label will be permanently and securely attached to the machine. The equipment and its component parts will be in compliance with 29 CFR 1910, NFPA 70 and NFPA 79. Approval shall be as specified under the “Approval” and “Acceptance” criteria in the OSHA regulations Subpart “O”, Machinery and Machine Guarding paragraph 1910.212 and Subpart “S” Electrical, paragraph 1910.303 and paragraph 1910.399.
Deliverables:
NRTL inspection report.
Operating and Maintenance (O&M) Manuals. Three (3) hard copies and one (1) electronic copy(s) of O&M Manuals must be provided with the machine. O&M Manuals will contain technical information, specifications, instructions for the operation, maintenance of the machine and recommended spare parts list. All copies of technical data must be legible and written in the English language.
Technical Data shall contain at a minimum:
A. Data must enable an average journeyman mechanic to operate, program, maintain, and repair the equipment.
B. Complete instructions and information for all equipment, components, assemblies, subassemblies, attachments, and accessories.
C. Operating instructions including programming requirements, pre-operational checks, start up, shut down and emergency shutdown procedures.
D. Maintenance and service instructions, including all preventive maintenance schedules, and lubrication charts.
E. Trouble-shooting guides.
F. Parts list containing: illustrations, part numbers, part nomenclature, original manufacturer, cross reference numbers, and recommended spare parts, including quantities.
G. Energy control procedure, in accordance with 29 CFR 1910.147, to bring equipment to a zero energy state for maintenance.
H. All mechanical and electrical schematics with a table of contents showing discrete components block diagrams, wiring diagrams with inputs and outputs identified system electrical interface documents, and drawings for the specific model of all machine equipment/drives/controls supplied.
Shipping. Contractor will be responsible for shipping to delivery address.
Examination. The table will be examined to determine compliance with these requirements.
Delivery address: The "Ship/Deliver to" address on the Bill of Lading (B/L) should include the CLIN number.
| Salient Characteristics for JML number: 2193-3807 to 2193-3812 |
| Mitsui Hi-Tech Model 205MH or equivalent |
| The surface grinding machine shall not exceed: |
| Weight, pounds 2,100 |
| Width, inches 70 |
| Depth, inches 40 |
| Table Height, inches 40 from floor |
| Total Height, inches 72 |
| The surface grinder shall meet the following specifications: |
| Table surface shall be at least 6” x 19” but not more than 7” x 20” |
| Table movement shall be at least 8” x 20” |
| Grinding wheel height shall be at least 18” from table. |
| Longitudinal feed 4” per revolution of hand wheel |
| Cross feed .1” per revolution of hand wheel |
| Vertical feed .05” per revolution of hand wheel |
| Cross feed hand wheel dial graduation .001” |
| Vertical feed hand wheel dial graduation .0001” |
| Grinding wheel size 8” x .75” x 1.25” |
| Spindle speed 3460 rpm |
| Spindle motor 1.33 HP |
| Power 3 phase 220V, 1.5 KVA, +/- 10% |
| The following standard accessories shall be provided: |
| Wheel adapter with puller |
| Jack bolts and base plates |
| Metric hand tool |
| Instruction manual |
| The grinding machine shall have the following: |
| Short casting head |
| Automatic lubrication |
| Oil bath system |
| Vertical ways shall be anti-friction hardened and ground steel with automatic lubrication |
| Table ways shall be removable D2 hardened and ground steel |
| Longitudinal table movement shall be on linear ball bearings between 3 vee ways and 1 flat way |
| Cross table movement shall be on double 90 degree vee ways |
| Spindle shall be removable cartridge type heavy duty with two sets of double row angular contacts and super precision ball bearings |
| Spindle motor shall be a dynamic balanced motor |
| Hand wheels shall be zero-setting slip-rings with verniers |
| National Recognized Testing Laboratory (NRTL) label will be permanently and securely attached to the machine. The equipment and its component parts will be in compliance with 29 CFR 1910, NFPA 70 and NFPA 79. Approval shall be as specified under the... |
| Deliverables: |
| NRTL inspection report. |
| Operating and Maintenance (O&M) Manuals. Three (3) hard copies and one (1) electronic copy(s) of O&M Manuals must be provided with the machine. O&M Manuals will contain technical information, specifications, instructions for the operation, maintenan... |
| Technical Data shall contain at a minimum: |
| A. Data must enable an average journeyman mechanic to operate, program, maintain, and repair the equipment. |
| B. Complete instructions and information for all equipment, components, assemblies, subassemblies, attachments, and accessories. |
| C. Operating instructions including programming requirements, pre-operational checks, start up, shut down and emergency shutdown procedures. |
| D. Maintenance and service instructions, including all preventive maintenance schedules, and lubrication charts. |
| E. Trouble-shooting guides. |
| F. Parts list containing: illustrations, part numbers, part nomenclature, original manufacturer, cross reference numbers, and recommended spare parts, including quantities. |
| G. Energy control procedure, in accordance with 29 CFR 1910.147, to bring equipment to a zero energy state for maintenance. |
| H. All mechanical and electrical schematics with a table of contents showing discrete components block diagrams, wiring diagrams with inputs and outputs identified system electrical interface documents, and drawings for the specific model of all machi... |
| Shipping. Contractor will be responsible for shipping to delivery address. |
| Examination. The table will be examined to determine compliance with these requirements. |
| Delivery address: The "Ship/Deliver to" address on the Bill of Lading (B/L) should include the JML number. |
File details come from the government source that posted it. Updated .