SPMYM2-22-Q-1681 (ADDITIONAL ORDERING DATA) WELDER.pdf

Light weight Industrial Stick/TIG welding machine

Must meet the following specifications:

• Must be able to weld on material type: Mild Steel, Stainless Steel

• Must be able to weld maximum material thickness3/8 in (Aluminum), 3/8 in (Mild Steel)

• Must be able to weld minimum material thickness0.004 in (Mild Steel), 0.012 in (Aluminum)

• Input Frequency50/60 Hz

• Max. Input Current200A at 230 - 460 VAC 1ph, 300A at 230 - 460 VAC 3ph

• Must run on single-phase at 5-200 Amps and three-phase at 5-300 Amps

• Polarity DC

• Stick Welding Maximum Output Current 300 A

• Stick Welding Minimum Output Current 5 A

• Stick Welding Output @ Duty Cycle 200 A @ 28 V, 100%, 250 A @ 30 V, 60%, 300 A @ 32 V, 40%

• TIG Welding Maximum Output Current 300 A

• TIG Welding Minimum Output Current 5 A

• TIG Welding Output @ Duty Cycle 200 A @ 18 V, 100%, 250 A @ 20 V, 60%, 300 A @ 22 V, 40%

• Welding Processes Stick Welding (SMAW), TIG Welding (GTAW)

• Must have Amperage Range 5 A to 300 A

• Must have Digital Readout Display, Integrated Latch System, Intuitive Interface, Rugged Case, Small, Three Handle Design

• Must include power supply, 10-ft. input cable, and two OKC 50 connectors

• Input Voltage208V AC, 460V AC

• Must have the following dimensions: Overall Depth 18.5 inches, Overall Height 12.61 inches, Overall Width 7.91 inches

• Plug Type: Bare Leads

• Must meet Nationally Recognized Testing Laboratory standards (CSA)

• Must weigh 33 pounds or less (for mobility standards)

• Must have welding Mode: CC

• Rated Output - STICK 40% Duty Cycle 3ph at 300 A / 30 V 60% Duty Cycle 3ph at 250 A / 30 V 100% Duty Cycle 1ph/3ph at 200 A / 28 V

• Rated Output - TIG 40% Duty Cycle at 300 A / 20 V 60% Duty Cycle at 250 A / 20 V 100% Duty Cycle 1ph/3ph at 200 A / 18 V

• Low open circuit voltage option must be enabled (VRD)