SPMYM2-22-Q-1409 (SALIENT CHARACTERISTICS) THREAD ROLLING MACHINE.pdf
PDF 131 KB Posted
- Attached to
- THREAD ROLLING MACHINE Federal contract opportunity
- Solicitation number
- SPMYM2-22-Q-1409
About this file
This document outlines requirements for a thread rolling machine and associated federal contract opportunity. The Defense Logistics Agency Land and Maritime is seeking to procure a thread rolling machine manufactured to original equipment manufacturer specifications. The machine must include minimum features such as independent spindle drive control, radial die line-up via motor control, and graphical cycle monitoring. The anticipated 100% total small business set-aside contract would have an April 2022 solicitation release date and April 2022 quote submission deadline. The thread rolling machine must be delivered by June 2022 to the specified Silverdale, Washington facility.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-22-Q-1409 (SOLICITATION) THREAD ROLLING MACHINE.pdf | ||
| SPMYM2-22-Q-1409 (SPECIFICATIONS) THREAD ROLLING MACHINE.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS THREAD ROLLING MACHINE
To include the following minimum/equal features:
• High accuracy independent control of spindle drive axis.
• Radial die line-up via motor control from the HMI.
• Graphing of cycle to allow fine control over process.
• HMI control of RPM and die depth position.
• HMI storage of set-up parameters.
• Digital scale for operator to quickly and easily monitor die position.
• Penetration rate is calculated.
• Quality control parameters to enable setting of cycle torque and position limits.
• Type: Infeed and Thrufeed.
• Motors: Servo Drive – 40HP Coolant – ¼ HP.
• Dies: Maximum Diameter – 8” Maximum Die Face Width – 5-1/2”.
• Spindle Size: 2-1/2”.
• Spindle RPM: 1-91 RPM.
• Rolling Pressure: Adjustable to 1000,000 lbs.
• Capacity: Maximum Diameter -3”.
• Hydraulic Capacity: 50 Gallons.
• Coolant Capacity: 80 Gallons.
• Thread Length control Limit Switch.
• Front “L” Support Including Front Bar Feed Fixture.
• Spring Loaded Rear Stop.
• Pneumatic part hold down with 2 handed cycle start.
• Enclosed Toe-In Indicator.
• Outboard Spindle support.
• Center Support Stands.
• Center support tubes for each size.
• 3/8-16 thread die, Infeed 3-1/2” wide.
• 3/8” D2 work support x 3” long.
• 1/2"-13 thread die, Infeed 5” wide.
• 1/2" D2 work support x 3” long.
• 5/8”-11 thread die, Infeed 5” wide.
• 3/4”-10 thread die, Thru Feed 3” wide.
• Roller support #320-1078 5/8 and 3/4 work
• 1”-8 thread die, Thru Feed 3” wide.
• Roller support for 1” work
• Available power is 480 V 3- phase60 hz, if required a transformer shall be included.
• The equipment shall be furnished with two (2) copies of the manufacturer’s standard Operation, Maintenance, and Repair Manual(s).
• NRTL
• On Site Training: Operators 3-8 hour days / Maintenance 1-8 hour day
• Package Freight, shipping to receiving activity (TRF, Bangor)
File details come from the government source that posted it. Updated .