SPMYM2-20-Q- (Salient Characteristics) PAU TESTING EQUIPMENT.pdf

Salient Characteristics for a Phased Array UT/Flaw Detector

Project #941-600 17 Jul 20

1. One (1) Phased Array UT/ Flaw Detector

2. The Olympus America Inc Phase Array UT/Flaw Detector shall include the following parts and quantities listed in the text box below.

# Qty Description Item # Part Number 1 1 Phased Array instrument Q1000094 OMNIX3-PATFM32128PR-UE 2 1 Scanner U8750053 COBRA 3 2 Full spare part kit U8775188 COBRA-SP-FULL 4 1 Preamplifier U8120038 5682-KIT01 5 1 Hand scanner U8750024 HSMT-COMPACT 6 1 “Y” adapter (splitter) U8100133 OMNI-A2-SPLIT 128 7 2 Custom phased array probe, 2.25 Mhz U8331117 2.25CCEVV35-16-8X10-A-15C-P-2.5-OM 8 2 Custom phased array probe, 3.5 Mhz US331149 3.5CCEV35-16-8X10-A15C-P-2.5-OM 9 2 Standard phased array probe, 5.0 Mhz U8331163 5CCEV35-16-8X10-A15-P-2.5OM

10 2 Standard phased array probe, 7.5 Mhz U8330826 7.7CCEV35-16-8X10-A15-P-2.5-OM 11 2 Custom phased array probe, 10 Mhz U8331014 10CCEV35-32-8X7-A15-P-2.5-OM 12 1 Kit U8721205 COBRA-A-SA15 13 2 Non-standard wedge Q7201892 SA15-N60S-CUNI-IH 14 2 Customer wedge Q7201930 SA15-N60S-CUNI-IH-AOD1.66 15 2 Non-wedge Q7201776 SA15-N60S-CUNI-IH-AOD2.375 16 2 Non-standard wedge Q7201777 SA15-N60S-CUNI-IH-AOD2.875 17 2 Non-standard wedge U8722143 SA15-N60S-CUNI-IH-AOD3.5 18 2 Non-standard wedge Q7201778 SA15-N60S-CUNI-IH-AOD4.5 19 2 Angle beam transducer U8435019 C542-SM 20 2 Angle beam transducer U8435020 C543-SM 21 2 Centrascan composite angle beam U8435021 C544-SM 22 2 Videoscan miniature angle beam U8474029 V564-SM 23 2 Wedge for conventional TOFD uT probe U8710004 ST1-60L-IHC 24 2 Wedge for conventional TOFD uT probe U8710028 ST1-60L-IHC-10D2 25 2 Wedge for conventional TOFD uT probe U8710032 ST1-60L-IHC-AOD3 26 2 Wedge for conventional TOFD uT probe U8710033 ST1-60L-IHC-10D3.5 27 2 Wedge for conventional TOFD uT probe U8710034 ST1-60L-IHC-A0D4 28 2 Wedge for conventional TOFD uT probe U8710006 ST1-70L-IHC 29 2 Wedge for conventional TOFD uT probe U8710039 ST1-70L-IHC-A0D2 30 2 Wedge for conventional TOFD uT probe U8710043 ST1-70L-IHC-A0D3 31 2 Wedge for conventional TOFD uT probe U8710044 ST1-70L-IHC-A0D3.5 32 2 Wedge for conventional TOFD uT probe U8710045 ST1-70L-IHC-A0D4 33 2 Wedge for conventional TOFD uT probe U8701657 ST1-80L-IHC 34 4 Miniature short approach screw-in wedge U8700405 ABSA-4T-45 35 4 Miniature short approach screw-in wedge U8700408 ABSA-4T-60 36 4 Miniature short approach screw-in wedge U8700410 ABSA-4T-70 37 24 Cable U8800349 LCM-74-6 38 3 Lithium ion battery pack U8760010 OMNI-A-BATT 39 1 External battery charger U8767077 OMNI-A-CHARGER 40 1 ESbeam tool Q1490012 SOFT-ESBEAM9SL 41 2 Angle beam transducer U8431030 A542S-SM 42 2 Angle beam transducer U8431031 A543S-SM

2. NRTL Certification Report - This includes the equipment and its component parts shall be in compliance with applicable Code of Electrical Regulations (CFR) Title 29, Part 1910. By definition, any equipment will be deemed acceptable and approved by TRF, Bangor, if it meets specific Occupational Safety and Health Administration (OSHA) conditions outlined in CFR Title 29, Part 1910; Subparts "O" and "S". Specifically, equipment will be "Accepted" by TRF, Bangor, if it has been inspected and found by a Nationally Recognized Testing Laboratory (NRTL) to conform to specified plans or procedures of applicable codes. The equipment (as a whole system) shall be Nationally Recognized Testing Laboratory (NRTL) inspected and certified (by an OSHA authorized third party).

One (1) “hard” copy of the NRTL certification report shall be provided. If the equipment type/model has already been NRTL inspected and certified, a certification report (one (1) ”hard” copy) or documentation mounted on the equipment, (which acknowledges it is NRTL certified), shall be provided.