SPMYM124Q0002 ORDERING DATA.pdf
PDF 137 KB Posted
- Attached to
- PARKER HOSES AND ADAPTERS Federal contract opportunity
- Solicitation number
- SPMYM124Q0002
About this file
This document provides ordering data for heavy duty hoses and camlock adapters required under the solicitation SPMYM124Q0002 from the Defense Logistics Agency Land and Maritime. The agency requires 50-foot and 25-foot lengths of 4-inch diameter nitrile rubber hoses with a minimum working pressure of 350 PSI and maximum of 450 PSI. Each hose assembly must include heavy duty male and female camlock adapters permanently attached to both ends of the hose. The hoses and fittings must be hydrostatically tested to 600 PSIG for 30 minutes with zero leaks. The document specifies technical requirements for temperature and pressure ratings, material composition, and certification testing. Acceptable product options include models from Parker and Novaflex Oilfield or approved equivalents.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM124Q0002.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ORDERING DATA
PARKER 7311 NXT-4000 4" HOSE X 50' FT WITH HD CAMLOCKS ON BOTH ENDS
PARKER 7311 NXT-4000 4" HOSE X 25' FT WITH HD CAMLOCK ENDS
• 4" I.D. X 4.83" O.D.
• HOSE SHALL HAVE A WORKING PRESSURE OF 350 PSI MINIMUM AND
450 PSI MAXIMUM
• HOSE SHALL HAVE A MINIMUM 1,600 PSI BURST PRESSURE
• 2.70- 2.80 LBS MAXIMUM WEIGHT PER FOOT WITHOUT COUPLING
• SHALL HAVE A TEMPERATURE RATING OF -40 DEGREES (F) TO 200
DEGREES (F)
• SHALL BE WEATHER, OIL, SOLVENT, AND MILD ACID RESISTANT
• SHALL HAVE NITRILE BLEND RUBBER WITH UHMPE WRAPPED FINSISH
COVER.
• SHALL HAVE A NITRILE RUBBER INNER TUBE.
• SHALL HAVE HIGH TENSILE DUAL STATIC WIRE PLIES (MINIMUM OF
FOUR (4) FOR REINFORCEMENT)
• TO BE SUPPLIED IN 25/50 FOOT LENGTHS (+12" / -12")
• EACH HOSE ASSEMBLY SHALL HAVE THE FOLLOWING ADAPTERS ON
EACH END, CONNECTED TO THE HOSE FITTINGS: 4" MALE HEAVY DUTY
CAM LOCK X HOSE SHANK (PT COUPLING P/N: 1200540H W/ 40EHD
BRASS BODY) ON ONE END AND 4" FEMALE HEAVY DUTY CAM LOCK X
HOSE SHANK (PT COUPLING P/N: 1200340H W/ 40CHD BRASS BODY) ON
THE OTHER END.
NOTE: EACH COUPLING SHALL BE PERMANTLY/MECHANICALLY ATTACHED BY
INTERNALLY EXPANDED, UTILIZING A STAINLESS STEEL FERRULE IN
ACCORDANCE WITH THE COUPLING MANUFACTURE RECOMMENDATION.
• EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG'S
NAME, (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED
AT 600 PSIG WITH CLEAN, FRESH WATER FOR 30 MINUTES WITH ZERO
LEAKS, WEEPS, END FITTING SLIPPAGE AND/OR BULGES.
• A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING
276, AND
• A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH CONTRACT.
HOSE SHALL BE PARKER 7311NXT-4000 OR NOVAFLEX OILFIELD FRACKING HOSE
P/N: 3274BT(U)-04000-00 OR EQUIVALENT.
File details come from the government source that posted it. Updated .