SPMYM123Q0071 COMBINED SYNOPSIS SOLICITATION.pdf

SPMYM123Q0071 COMBINED SYNOPSIS/SOLICITATION

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6 as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to

SAM.GOV ON 22 JUNE 2023. The solicitation number is SPMYM1-23-Q-0071. Quotes will be due by 12:00 AM EST on 29 JUNE 2023 and may be emailed to the attention of Ginger Beasley (ginger.beasely@dla.mil). Please make sure that the solicitation number (SPMYM1-23-Q-0071) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Vendors must answer all evaluation factors for their bids to be considered viable.

This solicitation documents and incorporates provisions and clauses in effect through FAC Number 2023-02 (check for updated FAC number at https://www.acquisition.gov/far) and DFARS Change Notice 03/22/2023 (check for updated DFARS change at https://www.acquisition.gov/dfars) . It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses:

https://www.acquisition.gov/far and https://www.acquisition.gov/dfars. The Request for Quotation (RFQ) number is SPMYM123Q0071. The NAICS code is 333618 and the Small Business Standard is 750 employees. The proposed contract action is for commercial items for which Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Single Award contract with Firm Fixed-price provisions, under the authority of FAR Subpart 13.5. The proposed contract is 100% set aside for small business concerns. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. All quotations received by the closing response date may be considered by the Government.

The Government requests responses from qualified sources capable of providing:

CLIN #: DESCRIPTION QUANTITY UNIT OF

ISSUE UNIT PRICE TOTAL

3046C001 FILTER HOUSING, PORT 4 EACH

3046C002 FILTER, ELEMENT, PUR 48 EACH

3046C003 HOUSING, FILTER, 2 4 EACH

Ordering Data

DOCUMENT NUMBERS:

3046C001,3046C002,3046C003

ITEM DESCRIPTION:

1.) JML: 3046C001 = FILTER HOUSING, PORT SIZE 2” NPS , THREADED, FLOW RATE 1035,

BOWL LONG, WITH DPG GAGE, ELEMENT GRADE AND TYPE, 3P, END SEAL U, PARKER

PN HN8L-3PUG

2.) JML: 3046C002 = FILTER, ELEMENT, PUROLATOR 70 MICRON FILTER ELEMENT,

POROPLATE ELEMENT ASSEMBLY, PUROLATOR FACET PP10DOE70.

3.) JML: 3046C003 = HOUSING, FILTER, 2" NPS THREADED CONNECTIONS, FOR 80

MICRON FILTER, 3M 6AL1

mailto:ginger.beasely@dla.mil https://www.acquisition.gov/far https://www.acquisition.gov/dfars https://www.acquisition.gov/far https://www.acquisition.gov/dfars

The anticipated delivery date for this acquisition is 10 WEEKS ARO. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only.

CONTACT INFORMATION, PALLETIZATION AND SHIPPING INSTRUCTIONS

If your company encounters any problems with this purchase order/contract, please contact Ginger Beasley by email at ginger.beasley@dla.mil or by telephone at (757) 396-8109.

PALLET REQUIREMENT

Contractors (drivers) delivering material to the Norfolk Naval Shipyard must come with two forms of Identification, one being a driver license or picture ID card issued by a State. The other form required is a SSN card, birth certificate issued by a state, Native American document or US citizen card. Driver(s) will not be escorted unless they have to go into the CIA.

All items/boxes over 40 lbs under this solicitation and/or contract is required to be palletized. Delivery will not be accepted to any material that IS NOT palletized. The shipment will not be offloaded and will be returned.

Material sourced or otherwise procured from NUFLO, Inc. (Cage Code: 3BZG7) and/or Synergy Flow Systems (Cage Code: 4GP29) are prohibited to be offered, sold, exchanged, or delivered to Norfolk Naval Shipyard.

Contract Number MUST be noticeable on the outside of the package and on the packing documents. All shipments must have the Contact Number or the Lead JML number labeled on the outside of all boxes. If not labeled the Warehouse may at the time of delivery turn the material away at the company's cost for not being able to identify the material.

SHIPPING LABEL INSTRUCTIONS

All shipments must have a label on the outside of each box, clearly providing the following information, in addition to packing slips inside the box:

Lead Document Number: (N421583046C001)

Contract or Purchasing Number: TBD

Government Purchasing Agent’s Name and Phone Number (if known): Ginger Beasley; (757-396-8109) mailto:ginger.beasley@dla.mil

If a label cannot be generated, the info must be clearly marked on the outside of each container.

Address all questions or concerns regarding the labeling or shipping documents with the government purchasing agent before confirming acceptance of the order.

The following FAR provisions and clauses are applicable to this procurement:

FAR provisions and clauses would be listed here by reference (unless they are fill-in).

52.202-1 Definitions JUN 2020 52.203-3 Gratuities APR 1984 52.203-17 Contractor Employee Whistleblower Rights and

Requirement To Inform Employees of Whistleblower Rights

JUN 2020

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

MAY 2011

52.204-7 System for Award Management OCT 2018 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-17 Ownership or Control of Offeror AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-20 Predecessor of Offeror AUG 2020 52.204-21 Basic Safeguarding of Covered Contractor Information

Systems

NOV 2021

52.209-2 Prohibition on Contracting with Inverted Domestic Corporations--Representation

NOV 2015

52.209-5 Certification Regarding Responsibility Matters AUG 2020 52.209-11 Representation by Corporations Regarding Delinquent Tax

Liability or a Felony Conviction under any Federal Law

FEB 2016

52.211-6 Brand Name or Equal AUG 1999 52.211-14 Notice Of Priority Rating For National Defense, Emergency Preparedness, and Energy Program Use

APR 2008

52.211-15 Defense Priority And Allocation Requirements APR 2008 52.211-17 Delivery of Excess Quantities SEP 1989 52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

MAR 2023

52.212-3 Alt I Offeror Representations and Certifications--Commercial Products and Commercial Services (MAY 2022) Alternate I

OCT 2014

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

DEC 2022

52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive Orders--Commercial Services

MAR 2023

The following clauses are included in FAR 52.212-5 (X):

(X) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

(X) 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities

NOV 2021

(X) 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

(X) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations

NOV 2015

(X) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors

MAR 2023

(X) 52.233-3 Protest After Award AUG 1996

(X) 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

(X) 52.203-6 Restrictions on Subcontractor Sales to the Government JUN 2020, with

Alternate I NOV

(X) 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards

JUN 2020

(X) 252.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment

NOV 2021

(X) 52.219-6 Notice of Total Small Business Set-Aside NOV 2020

(X) 52.219-28 Post-Award Small Business Program Representation MAR 2023

(X) 52.219-33 Nonmanufacturer Rule SEP 2021

(X) 52.222-19 Child Labor--Cooperation with Authorities and Remedies DEC 2022

(X) 52.222-21 Prohibition of Segregated Facilities APR 2015

(X) 52.222-26 Equal Opportunity SEP 2016

(X) 52.222-35 Equal Opportunity for Veterans JUN 2020

(X) 52.222-36 Equal Opportunity for Workers with Disabilities JUN 2020

(X) 52.222-37 Employment Reports on Veterans JUN 2020

(X) 52.222-50 Combating Trafficking in Persons NOV 2021

(X) 52.223-13 Acquisition of EPEAT® Registered Imaging Equipment JUN 2014

(X) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging

While Driving

JUN 2020

(X) 52.225-13 Restrictions on Certain Foreign Purchases FEB 2021

(X) 52.232-33 Payment by Electronic Funds Transfer—System for Award

Management

OCT 201

(X) 52.239-1 Privacy or Security Safeguards AUG 1996 52.219-1 Small Business Program Representations MAR 2023 52.227-1 Authorization and Consent JUN 2020 52.227-2 Notice And Assistance Regarding Patent And Copyright

Infringement

JUN 2020

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.233-2 Service Of Protest SEP 2006 52.242-13 Bankruptcy JUL 1995 52.242-15 Stop-Work Order AUG 1989 52.247-34 F.O.B. Destination NOV 1991 52.253-1 Computer Generated Forms JAN 1991 52.252-1 Solicitation Provisions Incorporated By Reference FEB 1998 52.252-2 Clauses Incorporated By Reference FEB 1998

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) Technical capability of the item offered meet the Government requirement

(ii) Price

(iii) Supplier Performance risk System (SPRS) and Federal Awardee Performance and Integrity Information

System (FAPPIS) will be reviewed to determine vendor responsibility

The relative order of importance of the evaluation factors are in descending order of importance. Technical and Price when combined are evaluated as being substantially more significant than all other factors combined.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.233-2 SERVICE OF PROTEST (SEP 2006)

(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from dla.maritime.postaward.fmse2@dla.mil.

(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.

Quoters shall include a completed copy of 52.212-3 and its ALT I with quotes. All clauses shall be incorporated by reference in the order.

Additional contract terms and conditions applicable to this procurement are:

DFARS provisions and clauses will be listed here by reference (unless they are fill-in)

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.203-7005 Representation Relating to Compensation of Former DoD Officials

SEP 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Antiterrorism Awareness Training for Contractors JAN 2023 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

mailto:dla.maritime.postaward.fmse2@dla.mil

252.204-7016 Covered Defense Telecommunications Equipment or Services--Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment of Services

JAN 2023

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements MAR 2022 252.204-7020 NIST SP 800-171 DoD Assessment Requirements JAN 2023 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.213-7000 Notice to Prospective Suppliers on Use of Supplier

Performance Risk System in Past Performance Evaluations

SEP 2019

252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors

JAN 2023

252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials

SEP 2014

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7001 Buy American And Balance Of Payments Program--Basic JAN 2023 252.225-7002 Qualifying Country Sources As Subcontractors MAR 2022 252.225-7020 Trade Agreements Certificate--Basic NOV 2014 252.225-7021 Trade Agreements--Basic JAN 2023 252.225-7036 Buy American –Free Trade Agreements--Balance of

Payments Program--Basic

JUN 2022

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7006 Wide Area Workflow Payment Instructions JAN 2023 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7002 Requests for Equitable Adjustment DEC 2022 252.244-7000 Subcontracts for Commercial Items JAN 2021 252.246-7008 Sources of Electronic Parts JAN 2023 252.247-7023 Transportation of Supplies by Sea JAN 2023

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission

(IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

http://www.aimglobal.org/?Reg_Authority15459

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL- STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.225-7000 BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE--BASIC (NOV

2014)

(a) Definitions. Commercially available off-the-shelf (COTS) item, component, domestic end product, foreign end product, qualifying country, qualifying country end product, South Caucasus/Central and South Asian (SC/CASA) state, South Caucasus/Central and South Asian (SC/CASA) state end product, and United States, as used in this provision, have the meanings given in the Buy American and Balance of Payments Program--Basic clause of this solicitation.

(b) Evaluation. The Government--

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American and Balance of Payments Program-- Basic clause of this solicitation, the offeror certifies that--

(i) Each end product, except those listed in paragraph (c)(2) or (3) of this provision, is a domestic end product; and http://dodprocurementtoolbox.com/site/uidregistry/ http://dodprocurementtoolbox.com/site/uidregistry/

(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The offeror certifies that the following end products are qualifying country end products:

___ (Line Item Number Country of Origin)

___ (Country of Origin)

(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'':

(Line Item Number) ___

(Country of Origin (If known)) ___

This announcement will close at on date at time Eastern.

This requirement will be prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures for commercial items found at FAR subpart 13.5, as supplemented with the additional information included in this notice. Accordingly, a Simplified Streamlined acquisition process will be used in the evaluation and award of the contract.

52.212-1 INSTRUCTIONS TO OFFERORS –COMMERCIAL ITEMS (MAR 2023) ADDENDUM

Quotations shall be emailed to Contract Specialist Name (E-mail: Contract Specialist Email Address) Questions relating to this notice are due on (insert date) no later than (insert time) (EST). Questions relating to this notice shall be submitted in writing via the above e-mail address. Please make sure that the solicitation number (SPMYM123QXXXX) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.

Quotations will consist of the following documents submitted together in Adobe Acrobat .pdf format:

1. Completed FAR 52.212-3 and its Alt I representations and certifications unless otherwise completed in

SAM;

2. Price for each line item being quoted in accordance with the Item No. listed on page 1 of this notice.

3. Acknowledgement of compliance with specifications as stated within this notice. (Note: This paragraph may not be necessary each time. It is to be utilized to ensure the vendor can supply the request and is technical in nature.)

Award will be made for the technically acceptable item or combination of technically acceptable items that result in the lowest aggregate price to the Government.

Price:

The estimated amount for each line item will be added together to determine the total estimated price which will become the evaluated price.

The vendor’s quoted price will be evaluated on the basis of price reasonableness. All prices must be considered fair and reasonable as determined by the Government. Price quote shall be held firm and valid for sixty (60) days.

The completion and submission of the above items will constitute a quote and will be considered the vendor’s unconditional assent to the terms and conditions of this solicitation and any attachments and/or exhibits.

Failure to provide all of these documents by the required date and time may preclude a quotation from award consideration at the discretion of the Government.

(Insert any applicable DLA local clauses/ provisions here in full text)

DISPUTES – AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (DEC 2016)

(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.

(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party.

The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233- 1), or, for the Agency, by the contracting officer, and approved at a level above the contracting officer after consultation with the ADR Specialist and legal counsel. Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the contracting officer before determining ADR to be inappropriate.

(c) If you wish to opt out of this clause, check here [ ]. Alternate wording may be negotiated with the contracting officer.

(End of Provision)

HAZARDOUS CHEMICAL EXPOSURE

Contractors are informed that their employees present on property under Norfolk Naval Shipyard cognizance may be exposed to hazardous chemicals as a result of shipyard operations. Information on the materials may be obtained from the Shipyard Safety and Health Office, Code 106.1, phone number (757) 396-3702 or 396-7912.

Ref. NAVSHIPYDNORINST PS100.56 VOL VI CHAPTER II PARA. 7-J(3)

Communications

(a) Except as specified in paragraph (b) below, no order, statement, or conduct of Government personnel who visit the Contractor's facilities or in any other manner communicate with Contractor personnel during the performance of this contract shall constitute a change under the "Changes" clause of this contract.

(b) The Contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and signed by the Contracting Officer, or is pursuant to specific authority otherwise included as a part of this contract.

(c) The Contracting Officer is the only person authorized to approve changes in any of the requirements of this contract and notwithstanding provisions contained elsewhere in this contract, the said authority remains solely with the Contracting Officer. In the event the Contractor effects any change at the direction of any person other than the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in charges incurred as a result thereof

Requirements for Access to the Norfolk Naval Shipyard

(a) Contractors’ representatives must be United States citizens. Representatives are to provide the NNSY Security Office proof of U.S. citizenship (i.e. DHS I-9 FORM. “Employee Eligibility Verification Form”). The I-9 is based on presentation of appropriate documentation that both verifies the employee’s eligibility for employment and denotes their citizenship status. Contractors can go to http://www.uscis.gov/i-9 to acquire the required form and completion guidance.

NOTE: The I-9 must be provided before a badge will be issued for unclassified contract work, for access to the shipyard. If the contract requires access to classified material, a visit request identifying the employee’s clearance status may suffice depending on the employee’s status within the JPAS database. In the case of contractor truck drivers, knowing some are owner operators, if they are carrying proof of citizenship they can be issued a badge for access to drop off/pick up material after being vetted by Pass Office clerks utilizing the SECNAV 5512/1 form (see link below). If the truck driver does not have sufficient documentation and the Sponsor (valid government employee) is willing to escort the driver to/from the desired location, a by-escort badge may be issued. All commercial vehicles entering NNSY must be inspected at the Commercial Vehicle Inspection Station (CVIS) located outside Gate 15 prior to entering the base.

(b) VENDORS/CONTRACTORS SHALL FORWARD ALL VISIT REQUESTS ON THEIR COMPANY

LETTERHEAD SIGNED BY AN AUTHORIZED COMPANY OFFICER.

(1) Vendors/contractors shall provide FULL name, FULL SSN, Date of Birth, Place of Birth and a specific statement attesting that the person(s) for whom they are requesting access are citizens of the United States.

By so stating, the vendor/contractor is certifying that they have positive documentation of that person’s citizenship on file (i.e. a signed and verified EEVF I-9 form). The request shall also state the specific reason for the visit request and the specific date(s) for which they are requesting access to Norfolk Naval Shipyard (i.e., date of delivery).

(2) Material Shipments: Upon completion of the above documentation, vendors/contractors shall fax the letter to the Material Division (phone: 757-396-3141 and fax: 757-396-1029).

(3) Service contractor: Upon completion of the above documentation, vendors/contractors shall fax the letter to Technical Point of Contact listed in the contract.

(c) IF THE PERSON FOR WHOM THE VENDOR/CONTRACTOR IS REQUESTING A BADGE WAS BORN

IN A FOREIGN COUNTRY, THAT PERSON SHALL BRING POSITIVE DOCUMENTATION OF UNITED

STATES CITIZENSHIP TO THE NORFOLK NAVAL SHIPYARD PASS OFFICE IN ADDITION TO THE

COMPANY LETTER. The additional documentation can be a birth certificate, passport or other official military documentation of United States citizenship. Once presented, it will be entered in the database and be available for future use so this step will not be required to be repeated.

(1) If the person for whom the vendor/contractor is requesting a badge is a naturalized United States citizen, that person SHALL BRING THEIR ORIGINAL NATURALIZATION papers with them to the pass office in addition to the aforementioned company letter. Once presented, it will be entered in the database and be available for future use so this step will not be required to be repeated.

(2) Any questions with regard to this requirement shall be addressed to the Purchasing Agent/Contract Specialist identified elsewhere on the solicitation/award document.

NOTE: PLEASE READ THE FOLLOWING AS IT APPLIES TO NEW ACCESS REQUIREMENTS

IMPLEMENTED AFTER 1 October 2011

(d) Commander, Navy Installations Command (CNIC), has established the Navy Commercial Access Control System (NCACS), a standardized process for granting unescorted access privileges to vendors, contractors, suppliers and service providers not otherwise entitled to the issuance of a Common Access Card (CAC) who seek access to and can provide justification to enter Navy installations and facilities. Visiting vendors may obtain daily passes directly from the individual Navy installations by submitting identification credentials for verification and undergoing a criminal screening / background check utilizing the SECNAV 5512/1 (DEPARTMENT OF THE NAVY LOCAL POPULATION ID CARD/BASE ACCESS PASS REGISTRATION) form (available at the Pass Office or online at https://navalforms.documentservices.dla.mil/web/public/home). Alternatively, if the vendor so chooses, it may voluntarily elect to obtain long-term credentials through enrollment, registration, background vetting, screening, issuance of credentials, and electronic validation of credentials at its own cost through a designated independent contractor NCACS service provider. Credentials will be issued every five years and access privileges will be reviewed / renewed on an annual basis. The costs incurred to obtain Navy installation access of any kind are not reimbursable, and the price(s) paid for obtaining long-term NCACS credentials will not be approved as a direct cost of this contract. Further information regarding NCACS can be obtained from the current service provider at http://www.rapidgate.com/enroll.

(a) OFFERORS SHALL IDENTIFY PRODUCT(S) QUOTED AS FOLLOWS: (mark with an “X” if applicable)

____________ (1) Quoting manufacturer/brand name and product/part number exactly as specified.

____________ (2) Identify Manufacturer ____________________________________

____________ (3) Quoting alternate material as follows:

ITEM NBR. MANUFACTURER/BRAND NAME PRODUCT/PART NBR.

____________ (4) Material not as specified. The following exceptions are taken to specification or purchase description:

(b) If offeror has marked (3) or (4) above, he/she shall submit adequate descriptive literature with the offer/ quotation to enable NNSY Personnel to technically evaluate the material offered.

(end of text)

(a) The offeror’s past performance shall be evaluated in accordance with FAR 13.106-2 or 15.305(a)(2), as applicable. This procurement is subject to Past Performance Information Retrieval System – Statistical Reporting (PPIRS-SR), authorized by the Department of Defense for use by participating activities during the acquisition of supplies and services.

(b) The purpose of the PPIRS-SR is to provide contracting personnel with quantifiable past performance information regarding delivery and quality, as collected from existing DoD reporting systems. PPIRS-SR uses the past performance data collected to classify each supplier’s performance by Federal Supply Class(es) or Service Code(s).

(c) Quality: The method used in PPIRS-SR to classify the quality of a supplier’s past performance is a comparison of quality records among all suppliers who have provided goods or services to the Federal Government which are categorized in the same Federal Supply Class or Service Class (FSC). Based on the comparison among suppliers in a specific FSC group, suppliers are classified by PPIRS-SR into a color rating that represents the supplier’s overall http://www.rapidgate.com/enroll quality performance for that specific Federal Supply Class or Service Class. The following is a summarization of the PPIRS-SR classification colors:

(1) Dark Blue: Top 5% of suppliers in FSC group*

(2) Purple: Next 10% of suppliers in FSC group*

(3) Green: Next 70% of suppliers in FSC group*

(4) Yellow: Next 10% of suppliers in FSC group*

(5) Red: Bottom 5% of suppliers in FSC group*

* If all supplier performance ratings for an entire FSC group are equal, all suppliers in that group will be classified Green.

(d) Delivery: Supplier delivery past performance is classified in PPIRS-SR by the supplier’s percentage of on time deliveries. On time deliveries are calculated using the number of line items delivered and a weighting factor which reflects the length of time a delivery was overdue. (e) PPIRS-SR classifications are established monthly for each supplier and can be reviewed at http://www.ppirs.gov/. Suppliers are granted access to PPIRS-SR for their own classifications. Offerors are encouraged to review their own classifications as well as the PPIRS-SR reporting procedures and methodology detailed in the PPIRS-SR Procedures Manual and the PPIRS-SR User Guide available at http://www.ppirs.gov. The method to challenge a rating is also found on the identified website.

(f) Suppliers with no history in PPIRS-SR will be considered to have a neutral PPIRS-SR rating.

(end of text)

L&M Proc Note 252-3 DLAD Procurement Notes Incorporated By Reference (Nov 2016) “DLAD Procurement Notes Incorporated By Reference (Nov 2016)

This solicitation incorporates one or more DLAD Procurement Notes by reference, with the same force and effect as if they were given in full text. The full text of a DLAD Procurement Note may be accessed electronically at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx and via 'References' on the DIBBS homepage.

(End of Text)

DLAD PROC NOTE C02

C02 Manufacturing Phase Out or Discontinuation of Production, Diminishing Sources and Obsolete Materials or Components. (DEC 2016) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)

The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components. The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.

In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry Data Exchange Program (GIDEP), where feasible; and to provide immediate advance notice of production phase-out to DLA DMSMS at dscc.dmsms@dla.mil.

DLAD PROC NOTE C03

C03 Contractor Retention of Supply Chain Traceability Documentation C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2020)

(1) By submitting a quotation or offer, the contractor, if it is not the manufacturer of the item, is confirming it currently has, or will obtain before delivery, and shall retain documented evidence (supply chain traceability documentation), as described in paragraph (2) of this procurement note, demonstrating the item is from the approved manufacturer and conforms to the technical requirements.

(2) At a minimum, the supply chain traceability documentation for the item shall include: basic item description, part number and/or national stock number, manufacturing source, manufacturing source’s Commercial and Government Entity (CAGE) code, and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to item(s) acceptance by the Government. The documentation should also include, if available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

(3) Contractors can find examples of acceptable supply chain traceability documentation at the Counterfeit Detection and Avoidance Program (CDAP) Website (http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection-Avoidance-Program/ ).

(4) The contractor shall immediately make documentation available to the contracting officer upon request. The contracting officer determines the acceptability and sufficiency of documentation. The contractor shall retain supply chain traceability documentation for six years after final payment under this contract for audit and other valid government purposes. If the contractor fails to retain or provide the documentation, or the contracting officer finds the documentation to be unacceptable, the contracting officer may take corrective action, including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

DLAD PROC NOTE C14

C14 Repackaging or Relabeling to Correct Deficiencies (May 2020)

(1) The Government may correct nonconforming packaging or marking for receipts of DLA-owned materiel if the estimated costs of correction are $1,000 or less. The contracting officer will advise the contractor of the discrepancy and that the Government has corrected the packaging or marking. The contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government’s costs to correct the deficiencies.

Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

(2) If the estimated costs of correction for receipts of DLA-owned materiel are more than $1,000, the contracting officer will advise the contractor of the discrepancy and have the materiel returned to the contractor for correction/resubmittal; or, if there are urgent requirements, have the Government remediate the discrepancy at the contractor’s expense.