SPMYM122Q0164 AMENDMENT FINAL.pdf

AN4215821590425

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

I.THIS AMENDMENT IS BEING CREATED TO UPDATE THE ORDERING DATA IN SECTION 3.2, TABLE 1

II. ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 08-Jul-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X SPMYM122Q0164

X 9B. DATED (SEE ITEM 11)

28-Jun-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

08-Jul-2022

CODE

DLA MARITIME NORFOLK

LAKEISHA VIOLENUSELLIS

CODE NMAB.Q7

(757)278-5101

PORTSMOUTH VA 23709-5000

SPMYM1 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SPMYM122Q0164

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 13-Jul-2022 05:00 PM to 14-Jul-2022 05:00 PM.

The following have been modified:

SOW

STATEMENT OF WORK

BAND SAW FOR Code 920

1. SCOPE: This Statement of Work defines the specification for a Metal cutting VERTICAL Band Saw.

It includes the associated training and service support.

1.1. Background: This procurement significantly improve the cycle time for cutting raw material. It shall consist of Two (2) each Vertical BandSaw and all components necessary for operation.

2. DOCUMENTS:

2.1. DESIGN: The machine shall be new and unused, capable of performing its intended function. The machine shall be complete, so that when connected to the utilities identified herein, it can be used for any function for which it is designed and constructed.

2.2. ELECTRICAL DESIGN: The entire electrical system shall conform to the requirements below and NFPA '79. All machine components shall use a single electrical source.

2.3. WORK LIGHT: The equipment shall include a work light to illuminate the work envelope. The lighting shall comply with NFPA 79 requirements, and have a protective shield. Fluorescent or other lighting with a strobe effect is not acceptable.

2.4. CONTROLS: Operator controls, instrumentation and indicators shall be mounted convenient to operating personnel. Such devices shall be clearly and legibly marked for function and identification. Controls shall be fitted with suitable handles, pushbuttons, or control knobs, as applicable.

2.5. SAFETY SIGNS AND LABELS: Safety signs and labels shall be in accordance with NEMA Z535.4.

Safety signs and labels shall be securely attached to the equipment in visible locations, at the point of hazard(s), with any safety precautions to be observed by the operator or maintenance personnel permanently marked on the signs.

2.6. SAFETY GUARDING: Covers, guards, or other safety devices shall be provided per ANSI B11.22 and 29 CFR 1910. The safety devices shall not interfere with the operation of the machine. The safety devices shall prevent unintentional contact with the guarded part, and shall be removable to facilitate inspection, maintenance, and repair of the parts.

2.7. INTERCHANGEABILITY: All parts subject to replacement shall be manufactured to definite dimensions and tolerances. Replacement parts shall be interchangeable without requiring modification.

2.8. LUBRICATION: Bearings (except sealed-for-life and self-lubricating type), mating gears and sliding parts shall be provided with means for lubrication. Reservoirs of splash-type systems shall be fitted with oil level sight gauges. Automatic force-feed and manually operated force feed systems shall be supplied with a filter.

Manually operated systems shall have control handles mounted in an accessible location convenient to the operator.

Oil holes, grease fittings and filler caps shall be easily accessible.

3. REQUIREMENTS:

3.1. The machine shall have the following salient characteristics

3.1.1. Electrical requirements: 460 Volts / 60 HZ / 3 Phase

3.1.2. Manual Tilt W/ SURE-LOCK.

3.1.3. Digital Tilt Readout.

3.1.4. Laser Line Generator

3.1.5. Dead roller conveyor 5’ L x 18” W, 2-1/2” Dia. With 12” Spacing loading side

3.1.6. Dead roller conveyor 5’ L x 18” W, 2-1/2” Dia. With 12” Spacing discharge side

3.1.7. Infinitely variable speed drive system

3.1.8. Coolant flushed, blade cleaning wire brush.

3.1.9. Flushing hose and auxiliary coolant nozzles

3.1.10. Build in Flood System with Coolant pan.

3.1.11. Automatic Band Mist lubricator.

3.1.12. Hydraulic blade tension.

3.1.13. 3° forward cant.

3.1.14. Blade breakage/stall motion detector-shut off switch

3.1.15. Band door interlocks.

3.1.16. Automatic Column Return.

3.1.17. Clutch power Feed

3.2. Machine Size and Capacity: The size and capacity of the Horizontal band saw shall be not less than specified in Table I.

TABLE 1

Characteristics Value

Cutting Capacity @ 90° 18" x 22" vertical Cutting Capacity @ 45° Right 18" X 14.5" vertical (minimum) Cutting Capacity @ 45° Left 18"x13" vertical (minimum)

Cutting Capacity @ 60° Right 18"x 9.7"vertical (minimum) Cutting Capacity @ 60° Left 18"x 7.3"vertical (minimum) Blade Size (L x W x Gage): 15.4"x 1.25"x 0.042

Band Speed (Variable) 50-450 fpm Speed Range 0-250 L

Blade Drive Motor 5 H.P.

Coolant Pump 1/8 H.P.

Coolant Tank Capacity 21 Gal Table Capacity 1800 Lbs.

3.3. Standard Equipment: All standard equipment required for proper operation of the Vertical Band Saw (such as special tools) shall be furnished.

3.4. SAW BLADE:

4. QUALITY ASSURANCE PROVISIONS:

4.1. Inspection and acceptance of the machine shall be performed at destination by Code 98 Industrial Engineering Branch and shall consist of type and kind; condition; operability, if readily determinable; preservation;

packaging.

5. TRAINING:

5.1. ON-SITE TRAINING: Within seven days after receipt of a written request by the receiving activity, the services of a qualified training representative(s) shall be provided. The representative(s) shall train personnel on site at the receiving activity. Training service shall be for a period of time sufficient to instruct personnel of the journeyman mechanic's level in the proper operation and maintenance of the equipment.

6. TECHNICAL MANUALS:

6.1. Three (3)/ one PDF- complete sets of technical manuals covering, installation, operation, service and maintenance, and part-listing shall be provided.

7. PRESERVATION, PACKAGING AND PACKING:

7.1. The equipment shall be packaged, packed and preserved for shipment to reach ultimate destination undamaged. Package shall be prominently marked "NOT FOR OUTSIDE STORAGE". Yellow packaging, packing, preservation and marking are prohibited.

7.2. The equipment shall be shipped palletized for ease of off-loading by fork lift truck. The Government shall be made aware in advance of any special lifting instructions.

7.3. The weight of the equipment shall be prominently and conspicuously displayed in pounds on each pallet.

7.4. The contractor shall notify NNSY TPOC at least two (2) working days in advance to schedule a delivery date for the equipment.

7.5. Shipping destination:

C/O Code 983 TPOC- DLA Building 234 Norfolk Naval Shipyard, Portsmouth, VA 23709

(End of Summary of Changes)