Attachment_1_Questions and Response (s).pdf
PDF 60 KB Posted
- Attached to
- Hose, Assembly, Steam Rubber Federal contract opportunity
- Solicitation number
- SPMYM121Q0098
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combined Synopsis.docx | DOCX document | |
| Combined Synopsis.pdf | ||
| RFQ _SPMYM121Q0098.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
8/9/2021
QUESTIONS AND RESPONSE (S)
1. EACH ASSEMBLY TO BE COUPLED, MALE x FEMALE BOSS AND SPUD WITH
POLYMER SEAT. MALE BOSS AND POLYMER SPUD TO BE PERMANENTLY
ASSEMBLED AND READY FOR USE.
Response:
On the female end of the hose will be a stem with a wing nut (Dixon GB26 and B27) while on the male end will be a MNPT x hose stem with a female spud on the end (Dixon MS26 and
B28).
2. EACH HOSE ASSEMBLY SHALL BE PERMANENTLY MARKED, AT A MINIMUM,
WITH REQUISITION NUMBER, WORKING PRESSURE AND MANUFACTURER'S
NAME.
A stainless-steel metal tag will not satisfy this requirement as it is not a permanent marking and will be removed and replaced by a shop test tag. On previous hoses, they were marked by stamping the rubber on the exterior so that the rubber is raised from the surface of the hose.
3. DO YOU NEED MALE PIPE THREAD OR FEMALE PIPE THREAD ON THE ENDS?
Response: See response under question #1.
4. VITON SEALS
A polymer type seal is what is typically used. Viton is an acceptable seal for this. All we require is that it can be used in steam systems of up to 450 degrees F.
5. SWIVEL OR NOT SWIVEL?
Response: See response under question #1.
File details come from the government source that posted it. Updated .