15Q0033P00001.doc

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

STATEMENT OF WORK

STATEMENT OF WORK (SOW)

(#1A, 1B, 2A and 2B RPSW Pump Mechanical Seal Conversion/ Installation)

USS GEORGE H. W. BUSH (CVN-77)

Scope:

1.1 Title: #1A, 1B, 2A and 2B RPSW Pump Mechanical Seal Conversion/ Installation

2. Location of work: Norfolk Naval Shipyard (NNSY)

2.1 Inside NNSY waterfront CIA; Building 171, Shop 31.

3. Reference:

3.1 OPNAVINST 5100.23G

3.2 29 CFR 1915.89

4. General Specifications:

4.1 Technical Represntative required to assist Norfolk Naval Shipyard in the installation of mechanical seals on a RPSW pump.

5. Period of Performance

5.1 July 15, 2015 thru December 15, 2015

6. Contractor Requirements:

6.1 Contractor shall provide one each Technical Representative to assist with the conversion and installation of the mechanical seals.

6.2 Contractor shall supply the John Crane mechanical seals NSP-00319 P/N M32682, 2 ea. required per unit.

6.3 Technical Representative shall have sufficient security clearance to allow him access to NNSY CIA area.

6.4 Technical Representative to be present during testing of the mechanical seal for troubleshooting and reassembly.

7. Government Responsibility:

7.1 Government shall provide all necessary conversion parts to accept John Crane mechanical seals.

7.2 Government shall provide all electricity and compressed air as needed.

7.3 Government shall provide timely access to NNSY, BLDG. 171, and Shop 31.

8. Points Of Contact:

8.1 To be provide after award

9. Safety Requirements:

9.1 "Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements OSHE OSHECM Chapter Hazardous Energy Control (HEC) requirements or safety requirements for site specific location of the contract.

a.

Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA’s Occupational Safety, Health, and Environment Corporate Manual (OSHECM) Chapter 250 (latest revision), when performing work under NNSY contract. All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer’s Representatives (CORs) be notified of the HEC scope of work prior to starting work. Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation. Appendix 250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC. HEC locks shall be provided by the contractor or NNGA for their employees use. The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number. HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed. HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out. OSHECM Chapter 250 Tags-Plus procedures will be strictly followed.

b.

Contractors and NNGAs may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA 1915.89 web site by using the following link to NNSY’s public access web site: http://www.navsea.navy.mil/shipyards/norfolk/default.aspx

c. Names and contact information for NNSY LOTCs and/or the Building Monitor will be provided by NNSY TPOC and/or CORs set forth elsewhere in this award document.

(End of Summary of Changes)