SPI PD_26161-01_54905_-.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 5 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

AB

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

26161-01 (54905) EXTINGUISHER,FIRE, 19207 AK16772080

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4210-01-6772080 03/01/2019 -

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 30.6 1.290 25.3 X 9.9 X 8.9

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 42

13. CLEANING 1-B A/R CUSHIONING: ASTM-D5118, TY CF, ST RSC, CL D,

MIL-STD-2073-1 GR 275, VR SW, SIZE: 8-1/8 X 7-1/8 X 4

14. DRYING 2-C A/R CUSHIONING: A-A-59136, CL 1, GR A, 2.0# DENSITY

MIL-STD-2073-1 3-C A/R CUSHIONING: ASTM-D4727, TY CF

15. PACKING 4-D 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D,

GR 275, VR SW, SIZE: 8-5/8 X 7-3/4 X 23-1/2

a. LEVEL A 5-E 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 22 X 31

MIL-STD-2073-1 & NOTE H 5-F 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR,

b. LEVEL B GR W5c, VR SW, SIZE: 9-1/2 X 8-1/2 X 24-1/2

MIL-STD-2073-1 & NOTE H

16. MARKING

MIL-STD-129 & NOTE G

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. CONTAINER MODIFIED TO HAVE HOLE LOCATED IN TOP FLAPS. SEE FIGURE 1 FOR HOLE LOCATION IN CONTAINER. CLOSE BOTTOM FLAPS OF CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6. PLACE CORRUGATED COLLAR (TABLE 1 – ITEM A) INSIDE CONTAINER. POSITION HOLE IN TOP FLAPS AROUND NECK OF CYLINDER, SEE FIGURE 2. SECURE TOP FLAPS WITH TAPE ALONG ENTIRE

FLAPS UP TO NECK OF CYLINDER.

C. SEE TABLE 1 AND FIGURES 1 - 6 FOR SIZES AND ORIENTATION.

D. CLOSE INNER CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

E. CLOSE BAG BY HEAT SEAL.

F. CLOSE OUTER CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B1.

G. IN ACCORDANCE WITH THE ITEM’S MATERIAL SAFTEY DATA SHEEET (MSDS) THIS ITEM IS

CONSIDERED TO BE A HAZAROUS MATERIAL FOR TRANSPORT.

1. PROPER SHIPPING NAME:

2. UNITED NATIONS OR IDENTIFICATION NUMBER:

3. HAZARD LABELS: NON-FLAMMABLE GAS

H. ADDITIONAL MARKINGS WILL BE INCLUDED FOR THE CYLINDER,COMPRESSED GAS,NITROGEN

DENOTING ITEM AS HAZARDOUS CLASS 2.2 IN ACCORDANCE WITH CFR TITLE 29, 40 AND 49.

I. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D

6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 5

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 AB

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

26161-01 (54905) EXTINGUISHER,FIRE, 19207 AK16772080

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4210-01-6772080 03/01/2019 -

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,

EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

TABLE 1 – CUSHIONING BILL OF MATERIAL

ITEM SIZE QTY REFERENCE

A 33 X 4 (FLAT LAYOUT) 1

CUSHIONING: ASTM-D4727, TY CF, CL D, GR

350, VR DW

B 8-1/2 X 7-5/8 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

C 8-1/2 X 16-1/4 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

D 5-3/4 X 16-1/4 X 1” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

E 5-3/4 X 16-1/4 X 2” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

FIGURE 1 – LOCATION OF HOLE IN CONTAINER (TOP VIEW)

NOTE: OUTSIDE DIMENSIONS OF CONTAINER SHOWN IN FIGURE.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 5

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

26161-01 (54905) EXTINGUISHER,FIRE, 19207 AK16772080

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 2 – CORRUGATED CUSHIONING DIMENSIONS (FLAT LAYOUT)

FLUTE DIRECTION

FIGURE 3 – LOCATION OF CONTAINER AROUND NECK OF CYLINDER

MANUFACTURER’S JOINT TAB

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 5

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

26161-01 (54905) EXTINGUISHER,FIRE, 19207 AK16772080

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 4 – IDENTIFICATION OF CUSHIONING INSIDE INNER CONTAINER (TOP VIEW)

NOTE: ITEM B (QTY 1) IS LOCATED ON BOTTOM OF CONTAINER

FIGURE 5 – IMAGE OF CYLINDER WITH CONTAINER ON NECK INSIDE INNER CONTAINER (TOP VIEW)

C

E

D

C

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 5

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

26161-01 (54905) EXTINGUISHER,FIRE, 19207 AK16772080

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 6 – LOCATION OF ITEM B (QTY 1) ON TOP OF CYCLINDER NECK CONTAINER (TOP VIEW)