SPI.pdf
PDF 106 KB Posted
- Attached to
- Rammer Linear, Actuator Federal contract opportunity
- Solicitation number
- SPRDL1-21-R-0040_Solicitation
About this file
This document contains a Special Packaging Instruction (SPI) form and related federal contract opportunity solicitation. The SPI form provides packaging and preservation requirements for a Linear Actuator, Rammer part number 13055589. It specifies that the item shall be cleaned, dried, wrapped in cushioning, and sealed in a bag and container in accordance with Military Standards. The related solicitation seeks this linear actuator item with identified National Stock Number and government part number. The opportunity type is a solicitation posted by the Defense Logistics Agency Land and Maritime. Offerors must submit proposals by July 7, 2021 for a guaranteed minimum quantity of 9 EA and maximum 5 year quantity of 314 EA, with delivery destination and FOB terms included.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL1-21-R-0040.pdf | ||
| SPRDL1-21-R-0040_0001.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for
Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.
13055589 LINEAR ACTUATOR, RAMMER 19200 AM13055589
4. NATIONAL STOCK NO.
5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
3040-01-652-9227 191007 - / L19K2236
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0)
10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA 16 U.P. 2.4 0.095 9.0 X 4.8 X 3.8
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 AR CAPS/PLUGS: NAS 847 (SEE NOTE A)
MIL-STD-2073-1, METHOD 41 2 2 CUSHIONING: A-A-59135 CL 2, GR A,
13. CLEANING SIZE: 10 X 10 X 1/4, (SEE NOTE B)
* 3 1 BAG: MIL-DTL-117, TY I, CL E, ST 1,
14. DRYING SIZE:13 X 9 (SEE NOTE C)
* 4 1 CONTAINER: ASTM D5118/D5118, ST RSC, TY CF,
15. PACKING CL WR, VAR SW, GR W5C,
a. LEVEL A I.D. SIZE: 8-1/2 X 4-1/4 X 3, (SEE NOTE D)
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* ITEMS SHALL BE CLEANED AND DRIED BY ANY PROCESS OR PROCESSES THAT ARE NOT INJURIOUS TO THE ITEM. ALL ITEMS SHALL PASS THE APPLICABLE CLEANING AND DRYING INSPECTION REQUIREMENTS OF MIL-STD-2073-1.
A. SEAL ALL OPENINGS TO THE INTERIOR OF THE LINEAR ACTUATOR, RAMMER WITH CAPS/PLUGS OF THE
APPROPRIATE SIZE.
B. APPLY A DOUBLE LAYER OF CUSHIONING WRAP TO THE LINEAR ACTUATOR, RAMMER. SECURE WITH TAPE ASTM
D5486/D5486M. DO NOT ALLOW TAPE TO COME INTO CONTACT WITH ITEM.
C. PLACE CUSHIONED ITEM IN BAG. CLOSURE SHALL BE BY HEAT SEALING.
D. CONTAINER CLOSURE SHALL BE IN ACCORDANCE WITH SEALING METHOD B OF ASTM D1974/D1974M.
WSC: KF ITEM SIZE: 7.3 X 3.0 X 1.4 ITEM WEIGHT: 2.0 APPROVED: JEFFREY VANDERVEER
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 1 Pages
File details come from the government source that posted it. Updated .