SPI.pdf
PDF 509 KB Posted
- Attached to
- F-16 Multimeter Federal contract opportunity
- Solicitation number
- SPRHA425Q0803
- Issued by
- Defense Logistics Agency Aviation
About this file
This document is a Special Packaging Instruction (SPI) for a Multimeter with Code ID 98747 and SPI Number F01-077-2764. The file provides detailed packaging, preservation, and shipping instructions for a military multimeter, including specific requirements for wrapping, cushioning, and protecting the device during transportation. Key packaging specifications include using heat-treated wooden materials compliant with International Standards for Phytosanitary Measures (ISPM No. 15), wrapping the bare unit, placing protective pads at the front panel ends, using desiccant and humidity indicators, and filling voids with additional cushioning. The packaging is designed to two levels (Level A and Level B), with precise dimensional and material requirements for the interior container, cushioning, and protective elements.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amend 0002.pdf | ||
| EDR.pdf | ||
| CDRLCPP.pdf | ||
| EDL.pdf | ||
| SPRHA425Q0803.pdf | ||
| SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 22 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
NOTES
1. WRAP BARE UNIT IN REF.-10 OR EQUAL AND TAPE USING REF.-12.
2. PLACE PAD, REF.-6, IN FRONT OF UNIT AT EACH END OF FRONT PANEL TO PROTECT KNOBS. PLACE REF.-7 ON EACH SIDE
OF WRAPPED UNIT AND PLACE IN INTERIOR CONTAINER WITH DESICCANT, REF.-8, HUMIDITY INDICATOR, REF.-9, THEN
CLOSE CONTAINER.
3. IF NEEDED LAMINATE PADS, REF.-6 AND -7, WITH ADHESIVE, A-A-59692 TYPE II OR EQUIVALENT TO ACQUIRE
REQUIRED THICKNESS.
4. FILL ANY VOIDS WITH ADDITIONAL CUSHIONING, REF.-11.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .