SPI (AK16998899 REV A).pdf

PDF 3 MB Posted Jun 26, 2023

Attached to: Vehicular Seat Federal contract opportunity
Solicitation number: SPRDL1-23-R-0061
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Dec 21, 2023

This document is a special packaging instruction for a crew seat identified under the federal contract opportunity solicitation number SPRDL1-23-R-0061 issued by the Defense Logistics Agency Land and Maritime. The instruction provides detailed requirements for individually packaging the crew seat, including fabricating custom foam blocks, applying cushioning and wrapping, and constructing a wood container. The seat must be preserved and packaged according to Military Standards MIL-STD-2073-1 and MIL-STD-1186. It also identifies packaging dimensions and weights, as well as quality assurance and marking requirements.

View the file

Other files for this federal contract opportunity

Other files attached to Vehicular Seat, newest first.
File	Type	Posted
SPRDL123R0061-0002.pdf	PDF	Aug 7, 2023
SPRDL123R0061-0001.pdf	PDF	Jun 30, 2023
SPRDL1-23-R-0061 Solicitation.pdf	PDF	Jun 26, 2023

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BM

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED

FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

21 MAR 2022

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 159.1 17.852 32.9 X 29.3 X 32.0

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1, METHOD 32

13. CLEANING 1-B 2 CUSHIONING: A-A-59135, CL 2, GR A, SIZE 10X10X1/4

MIL-STD-2073-1

14. DRYING 2-C CUSHIONING AND BLOCKING: SEE NOTES

MIL-STD-2073-1 3 WRAP: A-A-3174, TY I, CL 1, 6 MIL,

15. PACKING

NOTE D: SIZE: 89 X 49 (1 EA), NOTE F: 115 X 59 (1 EA)

4-D-E 1 CONTAINER: ASTM D5118, ST RSC, TY CF, CL DOM,

A. LEVEL A VAR SW, GR 275, SIZE: 26 X 25-3/8 X 29-3/8

MIL-STD-2073-1 & NOTE H

B. LEVEL B 5-F 1 BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 58 X 60

NOT APPLICABLE

16. MARKING 6-G 1 CONTAINER: ASTM D6251, TY III, CL 2, ST A,

MIL-STD-129 SIZE: 30-3/8 X 26-3/4 X 26

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER

SPECIFICATION.

B. APPLY CUSHIONING 10 X 10 (2 EACH) TO THE CLIPS AND SECURE WITH TAPE ASTM D5486 AS SHOWN IN

SKETCH ON PAGE 7.

C. FABRICATE BLOCKS “A”, “B”, “C”, “D”, “E”, “F”, “G”, “H”, “I”, “J” AND “K” IN ACCORDANCE WITH THE

CHART ON PAGE 3.

FABRICATE BLOCK “C” (1 EACH) AS SHOWN IN SKETCH ON PAGE 4.

FABRICATE BLOCK ASSEMBLY “2” BY SECURING BLOCK “B” (1 EACH), BLOCK “C” (1 EACH)

TO BLOCK “A” USING A SUITABLE WATERPROOF GLUE AS SHOWN IN SKETCH ON PAGE 5.

FABRICATE BLOCK ASSEMBLY “3” BY SECURING BLOCK “E” (1 EACH) TO BLOCK “F” (1 EACH) USING A

SUITABLE WATERPROOF GLUE AS SHOWN IN SKETCH ON PAGE 5.

FABRICATE BLOCK ASSEMBLY “4” (1 EACH) BY SECURING BLOCK “K” (1 EACH) TO BLOCK “F” (1 EACH)

USING A SUITABLE WATERPROOF GLUE AS SHOWN IN SKETCH ON PAGE 6.

FABRICATE BLOCK ASSEMBLY “5” (1 EACH) BY SECURING BLOCKS “I” (2 EACH) AND “J” TO BLOCK “H”

USING SUITABLE WATERPROOF GLUE AS SHOWN IN SKETCH ON PAGE 7.

D. PLACE ASSEMBLY “5” ON THE SEAT AND SECURE USING THE SEAT BELTS AS SHOWN ON PAGE 8.

APPLY WRAP SIZE: 89 X 49 TO THE CREW SEAT AND SECURE WITH TAPE ASTM D5486.

PLACE SEAT ASSEMBLY ON BLOCK ASSEMBLY “3” AS SHOWN ON IN SKETCH ON PAGE 9. PLACE

BLOCK ASSEMBLY “2” (1 EACH), BLOCKS “D” (2 EACH), BLOCK “G” (1 EACH) AND BLOCK ASSEBMLY “4”

AROUND THE SEAT ASSEMBLY AND SECURE WITH TAPE ASTM D5486 AS SHOWN IN SKETCHES ON

PAGES 9 AND 10.

NOTE “D” CONTINUED ON PAGE 2:

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 11 Pages

AK16998899

A2540-01-699-8899

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

21 MAR 2022

17. NOTES/DRAWING (Continued)

NOTE “D” CONTINUED:

PLACE CUSHIONED PART INTO CONTAINER AS SHOWN IN SKETCH ON PAGE 10.

MARK THE HEAVY SIDE OF THE CARTON IN ONE INCH LETTERS “HEAVY SIDE” AS SHOWN IN SKETCH

ON PAGE 10.

E. CLOSURE: CLOSE CONTAINER IN ACCORDANCE WITH ASTM D1974, METHOD 2B6.

F. APPLY BAG SIZE: 58 X 60 TO CARTON. CLOSURE: HEAT SEAL.

APPLY WRAP SIZE 115 X 59 OVER BAGGED ITEM TO PREVENT PUNCTURE TO THE BARRIER

MATERIAL. SECURE WITH TAPE ASTM D5486.

PLACE ITEM INTO THE WOOD CONTAINER WITH THE HEAVY SIDE DOWN AS SHOWN IN SKETCH ON

PAGE 11.

G. CONTAINER IS CONSTRUCTED OF ALL 1/2-INCH THICK PLYWOOD AND 1 INCH THICK NOMINAL LUMBER

AND IS MODIFIED TO INCLUDE BEVELED SKIDS. SIZE AND APPLICATION OF SKIDS ARE IN

ACCORDANCE WITH ASTM D6251.

TOP OF CONTAINER SHALL BE SECURED TO SIDES AND ENDS WITH WOOD SCREWS.

H. UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 11 Pages

2540-01-699-8899

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

BLOCK DESCRIPTION SIZE QTY COMMENTS

A A-A-59136, CLASS 1, GR A, TY I, 25-1/4 X 21-13/16 X 2 1

B A-A-59136, CLASS 1, GR A, TY I, 25-1/4 X 3-3/4 X 3 1

C A-A-59136, CLASS 1, GR A, TY I, 25-1/4 X 18 X 3 1 FABRICATE IN ACCORDANCE

WITH SKETCH ON PAGE 3.

D A-A-59136, CLASS 1, GR A, TY I, 25-1/4 X 25-1/4 X 2 2 FABRICATE IN ACCORDANCE WITH

SKETCH ON PAGE 5.

E A-A-59136, CLASS 1, GR A, TY I, 25-13/16 X 13-1/2 X 1 1

F A-A-59136, CLASS 1, GR A, TY I, 25-13/16 X 25-1/4 X 2 2

G A-A-59136, CLASS 1, GR A, TY I, 24-1/4 X 21-13/16 X 2 1

H A-A-59136, CLASS 1, GR A, TY I, 18 X 15 X 2 1 FABRICATE IN ACCORDANCE

WITH SKETCH ON PAGE 6.

I A-A-59136, CLASS 1, GR A, TY I, 9 X 7-1/2 X 2 2 FABRICATE IN ACCORDANCE

WITH SKETCH ON PAGE 6.

J A-A-59136, CLASS 1, GR A, TY I, 13-3/4 X 5-1/4 X 2 1 FABRICATE IN ACCORDANCE

WITH SKETCH ON PAGE 6.

K A-A-59136, CLASS 1, GR A, TY I, 18 X 17 X 2 1

BLOCK ASSEMBLY “1” IS NOT USED.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 11 Pages

AK16998899

A 2540-01-699-8899

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 4 of 11 Pages

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 5 of 11 Pages

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 6 of 11 Pages

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 7 of 11 Pages

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 8 of 11 Pages

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 9 of 11 Pages

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

APPLY WRAP SIZE 115 X 59 OVER BAGGED ITEM TO PREVENT PUNCTURE TO THE BARRIER

MATERIAL. SECURE WITH TAPE ASTM D5486.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 10 of 11 Pages

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12596555 (19207) SEAT, CREW 19207

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 11 of 11 Pages

SPECIAL PACKAGING INSTRUCTION

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

File details come from the government source that posted it. Updated Jun 26, 2023.