SPI_AK16914275.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of

Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB

Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

.476687 (05BU0) FIRE EXTINGUISHER 19207 AK16914275

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

13 OCT 2020

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 31.5 1.623 29.8 X 9.7 X 9.7

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 42

13. CLEANING 1-B A/R CUSHIONING: A-A-59136, CL 1, GR A, 4.0# DENSITY

MIL-STD-2073-1 2-C 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D,

14. DRYING GR 275, VR SW, SIZE: 8-5/8 X 8-5/8 X 27-1/2

MIL-STD-2073-1 3-D 1 ENVELOPE: MIL-DTL-6060E

15. PACKING 4-E 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR,

GR W5c, VR SW, SIZE: 9-1/4 X 9-1/4 X 29

a. LEVEL A

MIL-STD-2073-1 & NOTE G

b. LEVEL B

MIL-STD-2073-1 & NOTE G

16. MARKING

MIL-STD-129 & NOTE F

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. SEE TABLE 1 AND FIGURES 1 – 4 FOR SIZES AND LOCATIONS.

C. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

D. CLOSE BAG BY HEAT SEAL.

E. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B1.

F. ADDITIONAL MARKINGS WILL BE INCLUDED FOR THE FIRE EXTINGUISHER DENOTING ITEM AS

HAZARDOUS CLASS 2.2 IN ACCORDANCE WITH CFR TITLE 29, 40 AND 49.

G. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D

6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,

EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

A4210-01-691-4275

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

476687 (05BU0) FIRE EXTINGUISHER 19207 AK16914275

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

13 OCT 2020

17. NOTES/DRAWING

TABLE 1 – CUSHIONING BILL OF MATERIAL

ITEM DESCRIPTION QTY REFERENCE

A 8-1/2 X 8-1/2 X 2 THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

B 8-1/2 X 8-1/2 X 2 THICKNESS WITH HOLE 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

C 8-1/2 X 8-1/2 X 2 THICKNESS WITH CUT OUT 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

FIGURE 1 – ITEM B DIMENSIONS

FIGURE 2 – ITEM C DIMENSIONS

4210-01-691-4275 A

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

476687 (05BU0) FIRE EXTINGUISHER 19207 AK16914275

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

13 OCT 2020

17. NOTES/DRAWING

FIGURE 3 – LOCATIONS OF CUSHIONING ON ENDS OF EXTINGUISHER

A

A (BOTTOM)

C (X2)

B (X2)

4210-01-691-4275 A