SPI_AK16580405.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

XCL

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12587653 (19207) CONTAINER, TRANSMISSION 19207 AK16580405

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

8145-01-658-0405 01/11/2021 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA. NONE 791.0 49.149 55.0 X 36.8 X 39.4

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1E, METHOD 55 1-B DESICCANT: MIL-D-3464, TY I (40 UNITS)

13. CLEANING

MIL-STD-2073-1E

14. DRYING

MIL-STD-2073-1E

15. PACKING

a. LEVEL A

MIL-STD-2073-1E AND NOTE D

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 AND NOTE C

17. NOTES / DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE CONTAINER IN ACCORDANCE WITH A-A-52462, INCLUDING THE FIRST ARTICLE

INSPECTION REQUIREMENT.

B. PLACE 40 UNITS OF DESICCANT INTO CONTAINER DESICCANT BASKET.

C. SPECIAL MARKINGS SHALL BE APPLIED AS FOLLOWS:

1) THE FOLLOWING INFORMATION SHALL BE MARKED ON THE CONTAINER DATA PLATE FOR ALL

CONTAINERS:

a) CONTAINER SPECIFICATION

b) CONTAINER CONTRACT NUMBER

c) CONTAINER NATIONAL STOCK NUMBER

2) ALL THE DATA PLATE INFORMATION WILL BE MARKED ON THE CONTAINER DATA PLATE FOR

THOSE CONTAINERS GOING TO A TRANSMISSION CONTRACTOR WITH THE FOLLOWING

INFORMATION FOR THE DATA PLATE:

a) TRANSMISSION MODEL NUMBER

b) TRANSMISSION WITH CONTAINER NUMBER

c) TRANSMISSION WITH CONTAINER NATIONAL STOCK NUMBER

3) “CARC” SHALL BE MARKED WITH PAINT CONFORMING TO MIL-DTL-53039 OR MIL-DTL-64159, COLOR BLACK, IN 1-INCH LETTERS IN AN AREA AS NEAR AS PRACTICAL TO THE NAMEPLATE.

4) “REUSABLE CONTAINER: DO NOT DESTROY” SHALL BE MARKED WITH PAINT CONFORMING TO

MIL-DTL-53039 OR MIL-DTL-64159, COLOR BLACK, IN ½-INCH LETTERS IN AN AREA ON THE LOWER

CONTAINER SECTION ON THE SAME END AS THE NAMEPLATE.

D. THE ITEM IS THE SHIPPING CONTAINER.