SPI - AK16236725.pdf
PDF 83 KB Posted
- Attached to
- Cylinder Assembly Federal contract opportunity
- Solicitation number
- SPRDL1-23-Q-0087
About this file
This document provides special packaging instructions for a cylinder assembly being procured by the Defense Logistics Agency Land and Maritime under solicitation number SPRDL1-23-Q-0087. Key details include specifications for cleaning, drying, preservation, wrapping, blocking/bracing, and marking of the cylinder assembly in accordance with various military standards prior to packing in a modified Type III container. Dimensions and quantities are provided for lumber to be used in blocking and bracing the item interior during transportation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - SPRDL123Q0087.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
MP-0007873T (0LVS7) CYLINDER ASSEMBLY 19207 AK16236725
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-623-6725 9/17/2012 -
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 108.1 1.663 30.8 X 10.6 X 8.8
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 20
13. CLEANING 1-B A/R ITEM PREPARATION
MIL-STD-2073-1D 2-C A/R PRESERVATIVE: MIL-PRF-10924
14. DRYING 3-D A/R CAPS/PLUGS: NAS-847
MIL-STD-2073-1D 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE: 33 X 36
15. PACKING
5-F 2 BLOCKING/BRACING: ASTM-D6199, CL 3
1 CONTAINER: ASTM-D6251, TY III, CL 2, ST I, MODIFIED
a. LEVEL A SIZE: 27-3/4 X 8-1/4 X 6-1/2
MIL-STD-2073-1D & NOTE H
b. LEVEL B
NONE
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. ENSURE CYLINDER ASSEMBLY IS FULLY RETRACTED PRIOR TO PACKING.
C. APPLY PRESERVATIVE THROUGH ALL GREASE (ZERK) FITTINGS AND TO ALL UNPAINTED, UNPLATED
METALLIC SURFACES.
D. SEAL ALL OPENINGS TO ITEMS INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. WRAP ITEM ENTIRELY WITH PAPER, SECURE WITH TAPE ASTM-D6123.
F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE BELOW AND PAGE 2 FOR SIZES AND ORIENTATION.
G. CONTAINER MODIFIED TO INCLUDE 2 X 4 SKIDS PLACED IN ACCORDANCE WITH ASTM D6251. CLOSE
CONTAINER IN ACCORDANCE WITH ASTM D6251.
H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
ITEM SIZE QTY REFERENCE
A 2 X 4 X 7-3/4 1 ASTM-D6199, CL 3
B 2 X 4 X 5-1/2 1 ASTM-D6199, CL 3
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
MP-0007873T (0LVS7) CYLINDER ASSEMBLY 19207 AK16236725
44.. NNAATTIIOONNAALL SSTTOOCCKK NNOO.. 55.. DDAATTEE 66.. RREEVVIISSIIOONN
3040-01-623-6725 9/17/2012 --
17. NOTES/DRAWING
ORIENTATION OF BLOCKING/BRACING
ORIENTATION OF CYLINDER ASSEMBLY IN CONTAINER
NOTE: WRAP REMOVED FOR CLARITY
File details come from the government source that posted it. Updated .