SPI AK15653896.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 6 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

901500 (3R5K2) DRY CHEMICAL, FIRE EXTINGUISHER 19207 AK15653896

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4210-01-565-3896 03/18/2016

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 17.6 0.644 20.4 X 7.9 X 6.9

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 42

13. CLEANING 1-B 1 WRAP: MIL-PRF-121, TY II, SIZE: 22 X 24

MIL-STD-2073-1 2-C A/R CUSHIONING: ASTM-D4727, TY CF, CL D, GR 600,

14. DRYING VR DW

MIL-STD-2073-1 3-C A/R CUSHIONING: A-A-59136, CL 1, GR A, 2.0# DENSITY

15. PACKING 4-D 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D

GR 275, VR SW, SIZE: 7 X 6 X 18

a. LEVEL A 5-E 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 16 X 30

MIL-STD-2073-1 & NOTE H 6-F 1 CONTAINER: ASTM-D5118, TY CF, ST FOL, CL WR,

b. LEVEL B GR W5c, VR SW, SIZE: 7-1/2 X 6-1/2 X 18-3/4

MIL-STD-2073-1 & NOTE H

16. MARKING

MIL-STD-129 & NOTE G

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. WRAP ITEM ENTIRELY WITH PAPER, SECURE WITH TAPE.

C. SEE TABLE 1 AND FIGURES 1 – 8 FOR SIZES AND ORIENTATION.

D. PLACE WRAPPED ITEM AND CUSHIONING INTO CONTAINER AS SHOWN IN FIGURES 6 – 8, CLOSE

INNER CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

E. CLOSE BAG BY HEAT SEAL.

F. CLOSE OUTER CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 4B2.

G. ADDITIONAL MARKINGS WILL BE INCLUDED FOR THE FIRE EXTINGUISHER DENOTING ITEM AS

HAZARDOUS CLASS 2.2 IN ACCORDANCE WITH CFR TITLE 29, 40 AND 49.

H. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D

6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,

EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 6

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

901500 (3R5K2) DRY CHEMICAL, FIRE EXTINGUISHER 19207 AK15653896

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4210-01-565-3896 03/18/2016

TABLE 1 – CUSHIONING INFORMATION

ITEM SIZE QTY REFERENCE

A 6 X 7 (PAD WITH CUT OUT) 3

ASTM-D4727, TY CF, CL D, GR 600, VR DW, SEE

FIGURE 1

B 6 X 7 (PAD) 2 ASTM-D4727, TY CF, CL D, GR 600, VR DW

C 11-3/4 X 21-1/4 (FLAT LAYOUT) 1 ASTM-D4727, TY CF, CL D, GR 600, VR DW

D 11-3/4 X 24-1/4 (FLAT LAYOUT) 1 ASTM-D4727, TY CF, CL D, GR 600, VR DW

E 11-3/4 X 6 (PAD) 3 ASTM-D4727, TY CF, CL D, GR 600, VR DW

F 26-1/4 X 5 (FLAT LAYOUT) 1 ASTM-D4727, TY CF, CL D, GR 600, VR DW

G 6-1/2 X 5 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

H 5 X 1-1/2 X 2” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

FIGURE 1 – ITEM A DIMENSIONS

NOTE: ATTACH ALL THREE (3) OF ITEM A TOGETHER USING GLUE.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 6

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

901500 (3R5K2) DRY CHEMICAL, FIRE EXTINGUISHER 19207 AK15653896

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 2 – ITEM C DIMENSIONS (FLAT LAYOUT)

FIGURE 3 – ITEM D DIMENSIONS (FLAT LAYOUT)

NOTE: ITEMS C AND D SHALL BE SECURED BY THE MANUFACTURER’S JOINT TAB USING STAPLES, GLUE, OR TAPE.

FLUTE DIRECTION

MANUFACTURER’S

JOINT TAB

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 6

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

901500 (3R5K2) DRY CHEMICAL, FIRE EXTINGUISHER 19207 AK15653896

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 4 – ITEM F DIMENSIONS (FLAT LAYOUT)

NOTE: ITEM F SHALL BE SECURED BY THE MANUFACTURER’S JOINT TAB USING STAPLES, GLUE, OR TAPE.

FIGURE 5 – PLACEMENT OF ITEM A ON FIRE EXTINGUISHER

NOTE: PLACE CUT OUT OF PAD AROUND NECK OF FIRE EXTINGUISHER. WRAP NOT SHOWN FOR CLARITY.

FIGURE 6– ITEM B, C, D &E LOCATIONS INSIDE INNER CONTAINER

FLUTE DIRECTION

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 6

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

901500 (3R5K2) DRY CHEMICAL, FIRE EXTINGUISHER 19207 AK15653896

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 7 – ORIENTATION OF FIRE EXTINGUISHER AND ITEM A INSIDE INNER CONTAINER

FIGURE 8 – ITEM F, G AND H LOCATIONS INSIDE INNER CONTAINER

A

D

C

B E (QTY 3)

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 6

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

901500 (3R5K2) DRY CHEMICAL, FIRE EXTINGUISHER 19207 AK15653896

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

NOTE PLACE ITEM B ON TOP OF INNER CONTAINER CONTENTS.

F G

H