SPI AK15555461.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 5 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

065612 (06853) DRYER,AIR ASSEMBLY 19207 AK15555461

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4120-01-555-5461 11/9/2017 -

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 33.2 1.888 19.6 X 12.9 X 12.9

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1, SEE NOTES C - F

13. CLEANING 1-B A/R ITEM CONTENTS: SEE NOTE B

MIL-STD-2073-1 2-C A/R ITEM PREPARATION: SEE NOTES C & E

14. DRYING 3-D A/R CONSOLIDATION: SEE NOTES D & F

MIL-STD-2073-1

15. PACKING

a. LEVEL A

MIL-STD-2073-1 & NOTE H

b. LEVEL B

MIL-STD-2073-1 & NOTE H

16. MARKING

MIL-STD-129 & NOTE G

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. PART NUMBER 065612 (06853) DRYER,AIR ASSEMBLY, QTY 1, CONSISTS OF THE FOLLOWING:

SEGREGATED

PACK NUMBER

PART NUMBER

CAGE DESCRIPTION QTY

1 5001247 06853 PARTS KIT, BRACKET, V 1

1.1 112825 06853 LOWER MOUNTING BRACKET 1

1.2 249987 06853 3/8 HEX HEAD BOLT 2

1.3 202983 06853 3/8 LOCKWASHER 2

1.4 K046134 (CABLE)

K057631 (BRACKET)

06853 CABLE CLAMP ASSEMBLY (CABLE AND

UPPER BRACKET) 1

1.5 298476 06853 3/8 LOCKNUT 1

1.6 230240 06853 3/8 WASHER 1

1.7 K043772 06853 ISOLATOR 2

2 065612 06853 FILTER, ELEMENT, INTAKE 1

C. SEGREGATED PACK NUMBER 1 CONSISTS OF SEGREGATED PACK NUMBERS 1.1 – 1.7. PREPARE

SEGREGATED PACK NUMBER 1 AS FOLLOWS:

SEGREGATED PACK NUMBER: 1.1

DESCRIPTION: LOWER MOUNTING BRACKET QUANTITY: 1

1. CUSHIONING: A-A-59135,CL 1, GR A, SIZE: 12 X 12, SECURE WITH TAPE.

2. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 6 X 14, CLOSE BAG BY HEAT SEAL OR TAPE.

3. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 1”.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 10.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 5

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

065612 (06853) DRYER,AIR ASSEMBLY 19207 AK15555461

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4120-01-555-5461 11/9/2017 -

SEGREGATED PACK NUMBER: 1.2

DESCRIPTION: 3/8 HEX HEAD BOLT QUANTITY: 2

1. BAG: MIL-DTL-117, TY III, CL B, ST 2. SIZE: 3 X 3, PLACE BOTH ITEMS INTO BAG, CLOSE BAG BY

HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 2”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 10.

SEGREGATED PACK NUMBER: 1.3

DESCRIPTION: 3/8 LOCKWASHER QUANTITY: 2

1. BAG: MIL-DTL-117, TY III, CL B, ST 2. SIZE: 3 X 3, PLACE BOTH ITEMS INTO BAG, CLOSE BAG BY

HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 3”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 10.

SEGREGATED PACK NUMBER: 1.4 QUANTITY: 1

DESCRIPTION: CABLE CLAMP ASSEMBLY (CABLE AND UPPER BRACKET)

1. CUSHIONING: A-A-59135,CL 1, GR A, SIZE: 12 X 24, SECURE WITH TAPE.

2. BAG: MIL-DTL-117, TY III, CL B, ST 2. SIZE: 9 X 16, CLOSE BAG BY HEAT SEAL OR TAPE.

3. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 4”.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 10.

SEGREGATED PACK NUMBER: 1.5

DESCRIPTION: 3/8 LOCKNUT QUANTITY: 1

1. BAG: MIL-DTL-117, TY III, CL B, ST 2. SIZE: 3 X 3, CLOSE BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 5”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 10.

SEGREGATED PACK NUMBER: 1.6

DESCRIPTION: 3/8 WASHER QUANTITY: 1

1. BAG: MIL-DTL-117, TY III, CL B, ST 2. SIZE: 3 X 3, CLOSE BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 6”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 10.

SEGREGATED PACK NUMBER: 1.7

DESCRIPTION: ISOLATOR QUANTITY: 2

1. BAG: MIL-DTL-117, TY III, CL B, ST 2. SIZE: 3 X 5, PLACE BOTH ITEMS INTO BAG, CLOSE BAG BY

HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 7”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 5

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

065612 (06853) DRYER,AIR ASSEMBLY 19207 AK15555461

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

D. CONSOLIDATION: COMBINE ITEMS FROM NOTE C, SEGREGATED PACK NUMBERS 1.1 – 1.7

IN ACCORDANCE WITH THE FOLLOWING:

1. CONTAINER: ASTM-D5118, TY CF, ST FOL, CL WR, GR W5c, VR SW, SIZE: 10-1/2 X 2 X 10-1/2, CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 4B2.

2. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 10.

E. PREPARE SEGREGATED PACK NUMBER 2 AS FOLLOWS:

SEGREGATED PACK NUMBER: 2

DESCRIPTION: FILTER, ELEMENT, INTAKE QUANTITY: 1

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 14 X 24, CLOSE BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 2”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION, METHOD 10.

F. CONSOLIDATION: COMBINE ITEMS FROM NOTES D & E, SEGREGATED PACK NUMBERS 1 & 2

IN ACCORDANCE WITH THE FOLLOWING:

1. CUSHIONING: A-A-59136, CL 1, GR A, 2.0# DENSITY, SEE TABLE 1 AND FIGURES 1 - 2 FOR SIZES

AND ORIENTATION.

2. CUSHIONING: ASTM-D4727, TY CF, CL D, GR 350, VR DW SEE TABLE 1 AND FIGURE 3 FOR SIZE

AND ORIENTATION.

3. INNER CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 275, VR SW, SIZE: 12 X 12 X 18, CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

4. BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 27 X 38, CLOSE BAG BY HEAT SEAL.

5. OUTER CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR, GR W5c, VR SW, SIZE: 12-1/2 X 12-1/2

X 18-3/4, CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B1.

6. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

TABLE 1 – BILL OF MATERIAL

ITEM SIZE QTY REFERENCE

A 12 X 12 X 2” THICKNESS W/ SINGLE HOLE 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

B 12 X 12 X 2” THICKNESS W/ TWO (2) HOLES 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

C 12 X 12 X 2” THICKNESS W/O HOLE 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

D 12 X 12 PAD 1 ASTM-D4727, TY CF, CL D, GR 350, VR DW

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 5

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

065612 (06853) DRYER,AIR ASSEMBLY 19207 AK15555461

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 1 – ITEM A DIMENSIONS

FIGURE 2 – ITEM B DIMENSIONS

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 5

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

065612 (06853) DRYER,AIR ASSEMBLY 19207 AK15555461

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 3 – ORIENTATION OF CUSHIONING AND SEGREGATED PACK NUMBERS 1 & 2

*ALIGN ITEM B HOLES WITH PORTS ON TOP OF SEGREGATED PACK NUMBER 2.

NOTE: BAG AROUND SEGREGATED PACK NUMBER 2 REMOVED FOR CLARITY.

G. PROVIDE A PACKING LIST WITH THE UNIT PACK IN ACCORDANCE WITH MIL-STD-129 IDENTIFYING THE ITEMS WITHIN THE KIT. ON THE PACKING LIST, IDENTIFY THE ITEMS WITHIN EACH SEGREGATED

PACK TOGETHER WITH THEIR SEGREGATED PACK NUMBER.

H. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING

BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO

ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,

EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

INNER CONTAINER

SEGREGATED PACK

NUMBER 2

SEGREGATED PACK

NUMBER 1

A

D

C B*

SPECIAL PACKAGING INSTRUCTION