SPI AK14760517.pdf
PDF 14 KB Posted
- Attached to
- CYLINDER ASSEMBLY Federal contract opportunity
- Solicitation number
- SPRDL1-21-Q-0023
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL121Q0023.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-4760517 06/12/13
AK14760517
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION 5. DATE
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
XPK
KYRLANGA
SPECIAL PACKAGING INSTRUCTION
AT264214 (1J955) CYLINDER 19207
1 EACH NONE 0491.0 0013.832
MIL-STD-2073-1D, METHOD 43
MIL-STD-2073-1D
MIL-STD-2073-1D
10. UNIT PACK CU. (CU. FT.) 11. UNIT PACK SIZE (IN)
12. MILITARY PRESERVATION
17. NOTES / DRAWING
15. PACKING
14. DRYING
13. CLEANING
7. QUP 8. ICQ 9. UNIT PACK WT. (LB)
20.
DESCRIPTION
18.
STEPS
19.
REQ'D
A. PRESERVATION MATERIAL CODE ZZ = FLUSH OR SLUSH INTERNALLY WITH NORMAL OPERATING LUBRICANT (PRESERVATIVE CODE 89). DRAIN EXCESS THROUGHLY AND SEAL ALL OPENINGS WITH CAPS/PLUGS OF
APPROPRIATE SIZE IAW NAS 847.
B. APPLY MIL-PRF-32033 PRESERVATIVE TO ALL UNPAINTED, UNPLATED, EXTERIOR METALLIC SURFACES AND WRAP
ITEM.
C. ENVELOP FABRICATION SHALL BE IAW MIL-DTL-6060. MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BARRIER AT THE MOUNTING LOCATIONG USING MMM-A-260 ADHESIVE OR COMMERICAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A SUFFICIENT QUANTITY OF ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE
AIRTIGHT SEAL.
D. BLOCKING, BRACING, CUSHIONING AND IMMOBILIZATION OF THE ITEM WITHIN THE CONTAINER SHALL MEET THE
REQUIREMENTS OF MIL-STD-2073-1D
MIL-STD-2073-1D
NOT APPLICABLE
MIL-STD-129
096.5 014.4 017.2X X
b. LEVEL B
16. MARKING
a. LEVEL A
1-A 2-B 3-B 4-C 5-D
AR
AR
PRESERVATIVE: SEE NOTES
PRESERVATIVE: MIL-PRF-32033
WRAP: MIL-PRF-121, TYPE II
BAG: MIL-DTL-6060
CONTAINER: ASTM D6251, CLASS 2
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
DD-Form-2169
File details come from the government source that posted it. Updated .