SPI - AK14330030.pdf
PDF 146 KB Posted
- Attached to
- ADAPTER ASSEMBLY Federal contract opportunity
- Solicitation number
- SPRDL1-20-Q-0119
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL120Q0119.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BM
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
E8CR132-0030 (02978) ADAPTER ASSEMBLY 19207 AK14330030
4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION
2815-01-433-0030 05-24-2002 A
7. QUP 8. ICQ 9. UNIT PACK WT.(LB) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 178.2 6.376 39.3 X 31.5 X 8.9
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 10 & NOTE A 1-D BLOCKING/BRACING:
13. CLEANING
MIL-STD-2073-1D & NOTE B 2-E BARRIER: MIL-PRF-121, TY II
14. DRYING
MIL-STD-2073-1D & NOTE B 3-F 1 CONTAINER: ASTM D6251, OVERSEAS TYPE, ST A,
SIZE: 37-3/4 X 30 X 3-1/8
15. PACKING
a. LEVEL A
MIL-STD-2073-1D & NOTE C
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129
17. NOTES/DRAWINGS
A. THE UNIT PACK SHALL PROVIDE PHYSICAL AND MECHANICAL PROTECTION.
B. CLEAN AND DRY ITEM BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.
C. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
D. PLACE BLOCKING AS SHOWN ON PAGE 2 TO PREVENT MOVEMENT ONCE PART HAS BEEN PLACED IN
CONTAINER.
E. APPLY BARRIER MATERIAL BETWEEN ALL SECTIONS OF THE ADPTER ASSEMBLY THAT COME IN
DIRECT CONTACT WITH THE INTERIOR OF THE CONTAINER AND/OR BLOCKING/BRACING.
F. CONTAINER IS CONSTRUCTED OF ALL 3/8-INCH THICK PLYWOOD AND 1-INCH THICK NOMINAL LUMBER.
SIDES AND ENDS ARE CONSTRUCTED USING SOLID WOOD PANELS. SIZE AND APPLICATION OF SKIDS
ARE IN ACCORDANCE WITH ASTM D6251.
DD Form 2169, JUN 1997 Previous editions are obsolete. Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
-BM
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
E8CR132-0030 (02978) ADAPTER ASSEMBLY 19207 AK14330030
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2815-01-433-003 05-24-2002 A
17. NOTES/DRAWINGS CONTINUED
DD Form 2169, JUN 1997 Previous editions are obsolete Page 2 of 2 Pages
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
File details come from the government source that posted it. Updated .