SPI AK07708121.pdf

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

0BSPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-JG

XAF

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

6767771 (24617) PLATE,MOUNTING 19207 AK07708121

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

5340-00-770-8121 09/30/2021 H

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 84.0 2.175 20.8 X 20.3 X 8.9

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1, METHOD 42

13. CLEANING 1B 1 WRAP: MIL-PRF-3420, STY B, CL 2, 25 X 54 IN

MIL-STD-2073-1 2C A/R CUSHIONING: SEE TABLE 1

14. DRYING 3D 1 CONTAINER: ASTM D5118, TY CF, CL DOM, STY RSC,

MIL-STD-2073-1 SIZE:19-1/2 X 19-1/4 X 7-5/8 IN

15. PACKING 4D A/R TAPE: ASTM D6123, SIZE: 2 X 51 IN

5E 1 BAG: MIL-DTL-117, TY I, CL E, STY 1, SIZE: 28 X 30 IN

a. LEVEL A 6F 1 CONTAINER: ASTM D5118, TY CF, CL WR, STY RSC, MIL-STD-2073-1 AND NOTE G GR V3C, SIZE: 20-1/2 X 20 X 8-1/8 IN

b. LEVEL B 7F A/R TAPE: ASTM D5486, TY III, SIZE: 2 X 52 IN

MIL-STD-2073-1 AND NOTE G

16. MARKING

MIL-STD-129

17. NOTES/ DRAWING

A. PRESERVATION AND PACKAGING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1 AND ANY

APPLICABLE CONTAINER SPECIFIATIONS.

B. WRAP PRESERVATIVE BARRIER AROUND ITEM. SECURE WITH TAPE.

C. FABRICATE CUSHIONING AS SHOWN IN TABLE 1, SEE FIGURE 1 FOR CUSHIONING PLACEMENT.

D. PLACE CUSHIONING AND ITEM INTO CONTAINER. CLOSE IN ACCORDANCE WITH ASTM D1974 METHOD 2B6.

E. PLACE BOXED ITEM INTO BAG. CLOSE BY HEAT SEAL.

F. PLACE INTO CONTAINER. CLOSE IN ACCORDANCE WITH ASTM D1974 METHOD 2B7.

G. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBERBOARD BOXES, WEATHER-RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM D5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS

WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-JG

XAF

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

6767771 (24617) PLATE,MOUNTING 19207 AK07708121

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

5340-00-770-8121 9/30/2021 H

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

17. NOTES/ DRAWING

TABLE 1 – CUSHIONING CUT LIST

CUSHION

DESCRIPTION QTY SIZE (IN.) NOTES MATERIAL

TOP PAD 6 19-1/4 X 19-1/4 LAMINATED ASTM D 4727, TY CF, CL DOM, VAR SW, GR 200

TOP PAD 4 19-1/4 X 19-1/4 HOLE: 5-7/16 DIAM.

CENTERED

ASTM D 4727, TY CF, CL, DOM, VAR SW, GR 200

TOP PAD 2 19-1/4 X 19-1/4 SOLID ASTM D 4727, TY CF, CL, DOM, VAR SW, GR 200

CENTER TUBE 1 SEE DIAGRAM CONSTRUCT PER

DIAGRAM

ASTM D 4727, TY CF, CL, DOM, VAR DW, GR 350

BOTTOM PAD 8 19-1/4 X 19-1/4 LAMINATED ASTM D 4727, TY CF, CL, DOM, VAR SW, GR 200

BOTTOM PAD 6 19-1/4 X 19-1/4 HOLE: 5-5/16 DIAM.

CENTERED

ASTM D 4727, TY CF, CL, DOM, VAR SW, GR 200

BOTTOM PAD 2 19-1/4 X 19-1/4 SOLID ASTM D 4727, TY CF, CL, DOM, VAR SW, GR 200

FIGURE 1 – CUSHIONING ASSEMBLY EXPLODED VIEW

SPECIAL PACKAGING INSTRUCTION