SPI AK01505897.pdf
PDF 120 KB Posted
- Attached to
- Track Shoe, Vehicula Federal contract opportunity
- Solicitation number
- SPRDL1-23-R-0032
About this file
This document provides special packaging instructions for track shoe assemblies procured under solicitation number SPRDL1-23-R-0032. The special packaging instructions specify how to preserve, clean, dry, pack, block, strap, and mark 14,202 track shoe assemblies identified as National Stock Number 2530-00-150-5897. The assemblies are to be preserved and packed according to Military Standard 2073-1E and assembled into secured units of two sections of eight shoe strips each before packing at level A or B. The Defense Logistics Agency Land and Maritime is the procuring agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL123R0032.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CL
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
11645125 (19207) TRACK SHOE ASSEMBLY 19207 AK01505897
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2530-00-150-5897 05-16-2017 J
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
016 NONE 80.0 0.827 28.0 X 6.9 X 7.4
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1E, METHOD 20 1C A/R PRESERVATIVE: MIL-PRF-16173, GRADE 1.
13. CLEANING 2D 2 BLOCKING: ASTM-D6199, CLASS 2, GROUP II OR III,
MIL-STD-2073-1E SIZE: 2 X 6 (NOM) X 60
14. DRYING 3D 12 BLOCKING: ASTM-D6199, CLASS 2, GROUP II OR III,
MIL-STD-2073-1E SIZE: 2 X 6 (NOM) X 8
4E 4 STRAPPING: ASTM-D3953, TYPE I,
15. PACKING SIZE: 1-1/4 OR 3/4 X 0.035 X A/R.
a. LEVEL A 5G 3 STRAPPING: ASTM-D3953, TYPE I, MIL-STD-2073-1E AND NOTE H SIZE: 1-1/4 X 0.035 X A/R.
b. LEVEL B 6G 4 BLOCKING: ASTM-D6199, CLASS 2, GROUP II OR III, MIL-STD-2073-1E AND NOTE H SIZE: 1 X 2 (NOM) X 22
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
∗ ESTIMATED PACKED WEIGHT: 2750 LBS.
A. PRESERVATION AND PACKING SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1E.
B. SHOES SHALL BE ASSEMBLED INTO EIGHT SHOE TRACK SECTIONS.
C. PRESERVATIVE SHALL BE APPLIED TO ALL UNPAINTED METALLIC SURFACES. APPLICATION MAY BE ACCOMPLISHED BY DIPPING, SPRAYING OR BRUSHING. PRESERVATIVE ON RUBBER COMPOUND IS
ACCEPTABLE.
D. NAIL BLOCKING FROM STEP 3, ONTO BLOCKING FROM STEP 2, THREE PIECES EACH AS ILLUSTRATED ON PAGE 2. BLOCKING IS TO BE FLUSH AT ENDS. TWO OF THESE ASSEMBLIES ARE REQUIRED.
E. LAY ONE 8-SHOE STRIP SECTION ON FLOOR WITH CENTER GUIDES UP. PLACE ASSEMBLED BLOCKING FROM NOTE D ON EACH SIDE OF CENTER GUIDES. SECURE BLOCKING TOGETHER WITH TWO PIECES
OF STRAPPING, STEP 4, AND NAILS AS SHOWN ON PAGE 2.
F. PLACE SECOND 8-SHOE STRIP SECTION ON TOP OF BLOCKING AND 8-SHOE STRIP SECTION FROM
STEP E WITH CENTER GUIDES POINTING DOWN. MAKE SURE THAT THE END CONNECTORS AND
CENTER GUIDES ON ENDS OF TRACK ARE AT OPPOSITE ENDS. SEE PAGE 2.
G. POSITION BLOCKING FROM NOTE 6 AS ILLUSTRATED ON PAGE 2. TIGHTLY SECURE WITH STRAPPING FROM STEP 4 THRU BOTH SECTIONS OF TRACK AND AROUND BLOCKING. PLACE ANOTHER SECTION OF STRAPPING FROM STEP 5 COMPLETELY AROUND BOTH TRACK ASSEMBLIES AND BLOCKING. SEE
PAGE 2.
H. THE UNITIZED LOAD IS ACCEPTABLE FOR LEVEL A AND LEVEL B PACKING.
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CL
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
11645125 (19207) TRACK SHOE ASSEMBLY 19207 AK01505897
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2530-00-150-5897 05-16-2017 J
17. NOTES / DRAWING
NOTE:
CIRCLED NUMBERS REFERENCE STEPS FROM PAGE 1
File details come from the government source that posted it. Updated .