SPECS Sheet OSS Fiber Project.docx
DOCX document 16 KB Posted
- Attached to
- OSS Fiber Optics Federal contract opportunity
- Solicitation number
- FA489723QC030
About this file
This specification sheet outlines fiber optic cable material requirements for a project at Mountain Home Air Force Base in Idaho. The 366th Communications Squadron requires 2 splice cassettes, 10,000 feet of 48 strand single mode armored cable, 4 installation harnesses, fire block sealant, label maker tape, wire pulling lubricant, mule tape, swivels, cable tags, Velcro, cable ties, and a closet connector housing. An additional 30,000 feet of detectable conduit is also specified. The material must be installed between the GATR site and Building 900 in accordance with manufacturer specifications. The installation work center will provide all labor, equipment, tools and perform the setup, installation, and testing to ensure proper operation of the installed fiber optic circuit. Any non-functioning equipment must be diagnosed and repaired.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| COMBO-OSS fiber-Final.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATION SHEET
Mountain Home AFB, ID OSS Fiber Project 23 February 2023
1. GENERAL: The 366 Communications Squadron located on Mountain Home AFB, ID requires fiber optic cable material. This material will be installed between the GATR site and Bldg 900.
2. The LOM MINIMUM SPECIFICATIONS: The items to be purchased (at a minimum) comply with the following salient characteristics:
2.1 Physical Characteristics
2.1.1 Qty 2 x 24 Strand Pigtailed Splice Cassettes or equal
2.1.2 10,000 feet of 48 Strand Single Mode Armored Filled Cable or equal
2.1.3 Qty 4 x Installation Harnesses
2.1.4 Qty 20 x Fire Block Insulating Foam Sealant - 12oz can or equal
2.1.5 Qty 2 x Label Maker Tape
2.1.6 Qty 3 x Wire Pulling Lubricant - 5 Gallons
2.1.7 Qty 7 x Reels of 3,000 ft Mule Tape or equal
2.1.8 Qty 4 x Swivels
2.1.9 Qty x 24 packs of Cable Tags (5 per pack)
2.1.10 Qty 2 x Rolls of Velcro or equal
2.1.11 Qty 1 x pack of 8 inch Cable Ties (1000 per pack)
2.1.12 Qty 1 x 4 Unit Closet Connector Housing
2.1.13 30,0000 feet of 2in 4 cell detectable or equal
3. INSTALLATION: The SCONT work center shall provide all personnel, equipment, tools, materials, supervision, transportation, and other items needed to setup/install the project.
3.1. The SCONT work center shall install all requested equipment in accordance with (IAW) manufacturer’s specifications.
3.2 The SCONT work center shall ensure proper operation of the installed fiber optic circuit.
3.3 Any equipment not functioning properly IAW manufacture’s specifications shall be diagnosed and repaired by the SCONT work center.
File details come from the government source that posted it. Updated .