SPECS.pdf
PDF 89 KB Posted
- Attached to
- Ordnance Deformer Federal contract opportunity
- Solicitation number
- FA489720Q0036
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - FA489720Q0036.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATION SHEET
Mountain Home AFB, ID
DMIL Machine 22 July 2020
1. GENERAL: The 366th Fighter Wing located on Mountain Home AFB, ID requires a small arms brass deformer for demilitarization (DMIL) of expended small arms cartridge casings (ESACCs) of .50 caliber (12.7 millimeter) or smaller.
2. MINIMUM SPECIFICATIONS: Stationary Ordnance Deformer, must (at a minimum) comply with the following salient characteristics:
2.1. Physical Characteristics
2.1.1. Electrical: 480v three phase.
2.1.2. 50 hp soft start electric motor.
2.1.3. Process 8,000 – 11,000 lbs per hour of ESACCs.
2.1.4. Electric conveyor drive.
2.1.5. Capable of deforming spent cartridges, up to and including 20mm., beyond the point of reuse.
2.2. Warranty
2.2.1. 2 year manufactured components and workmanship
2.2.2. Parts and components manufactured which fail due to defective material or poor workmanship will be repaired and/or replaced to remedy the failure.
3. INSTALLATION: The Contractor shall provide all personnel, equipment, tools, materials, supervision, transportation, and other items needed to setup/install the requested ordnance deformer.
3.1. The Contractor shall install the requested ordnance deformer in accordance with
(IAW) manufacturer’s specifications.
3.2. The Contractor shall ensure proper operation of the installed ordnance deformer.
3.3. Any equipment not functioning properly IAW manufacture’s specifications shall be diagnosed and repaired by the Contractor.
3.4. The Contractor shall ensure cleanliness of Government facility is maintained at all times.
3.5. The Government will inspect facility for cleanliness prior to Contractor’s departure.
3.6. Any damage done to Government property by the Contractor shall be repaired by the Contractor at the Contractor’s expense.
4. TRAINING: The Contractor shall conduct training of entire system to Government personnel.
4.1. Following completion of installation by purchaser, the Contractor shall provide technical support if there are any issues either by telephone or in person.
5. SPECIFICS:
3.1. Shipping must be included in the quotation.
3.1.1. Contractor shall deliver to the Gunfighter Recycle Center – 1800 Ironwood Dr., Mountain Home AFB ID, 83648
3.1.2. Delivery will be no later than 90 days after date of contract (ADC).
File details come from the government source that posted it. Updated .