Specifications Sheet.docx
DOCX document 326 KB Posted
- Attached to
- Perimeter Solar Lighting Federal contract opportunity
- Solicitation number
- FA542223Q0018
About this file
This specifications sheet outlines requirements for a perimeter lighting project at Air Base 201 in Agadez, Niger. The project requires 413 concrete light pole bases, 413 aluminum or galvanized steel light poles that are approximately 15 feet long, and 413 solar LED lights that produce at least 6,000 lumens of light with a minimum 10 hour run time from a 52W solar panel. The lights must be IP65 certified and include mounting brackets. Products must be brand new and delivered to the 724th Expeditionary Air Base Squadron. Bidders must provide standard commercial warranties and warranty service contact information prior to project acceptance.
The related federal contract opportunity is a solicitation issued by the Department of the Air Force United States Air Forces in Europe - Air Forces Africa seeking proposals for the perimeter solar lighting project described in the specifications sheet.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - FA542223Q0018.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Requirements 724th Expeditionary Air Base Squadron (724 EABS) Perimeter Lighting 24 July 2023
1.0. PURPOSE. The purpose of this requirement is to provide improved lighting infrastructure to AB201 and advance the installation towards a semi-permanent condition. This requirement is referenced in the United States Africa Command Manual (ACM) 4700.05A Table F-1. These lights will be installed for the purpose of illuminating the perimeter road and fenceline at Air Base 201, Agadez, Niger. Solar lights are permitted for use per section 4-6 of UFC 3-530-01.
2.0. DESCRIPTION OF ITEMS. Equipment must meet minimum specifications listed below.
| Item | Quantity (QTY): | |
| 2.1. Concrete Light Pole Bases. See below diagram for specifications | QTY: 413 |
2.2. 15' Metal Light Poles. QTY: 413
2.2.1 Light poles shall be approximately 4.5 meters / 15 feet long with approximate 100mm outside diameter, 90mm inside diameter (10mm wall thickness). Light poles shall be made out of aluminum or galvanized steel. Light poles shall have a cap secured on one end capable of preventing rainfall/dust from entering pole.
2.3. Solar LED Lights.
| QTY: 413 | |
| 2.3.1 Per manufacturers specifications, Solar LED light units shall be at least 30W nominal power and shall produce at least 6,000 Lumens. Run time at full power shall be no less than 10 hours. Solar panel shall be no less than 18V 52W. Unit shall be an all in one design with battery, light, and solar panel. Unit shall have auto on/off programmable features. Unit shall be IP65 certified or similar. Solar light LED units shall come equipped with mounting bracket compatible with manufacturers’ recommendations to affix the unit to the metal pole requested as part of this solicitation. |
3.0. DELIVERY REQUIREMENTS:
3.1. All items must be delivered to our CONS office. The address is:
724 EABS CONS
PSC 65 BOX 1005
APO, AE 09909
6.0. STANDARD WARRANTY: The contractor shall provide any Original Equipment Manufacturer (OEM) standard commercial warranty applicable to the products being purchased at no additional cost to the Government.
6.1. Prior to project acceptance, the contractor shall provide the customer with all manufacturer warranties as needed for any component incorporated into this project such as equipment manuals, literature, CDs and DVDs and other documentation on all equipment.
6.2. Prior to project acceptance, the contractor shall provide written procedures, points of contact within company, and required information for all warranty services prior to project acceptance. This information shall include written confirmation of the warranty period, phone numbers and contact information/procedures for technical support, troubleshooting assistance, and replacement of faulty equipment.
7.0. GENERAL INFORMATION: Items must be brand new. Refurbished items are not authorized.
image1.emf
File details come from the government source that posted it. Updated .