SPECIFICATIONS SHEET.docx
DOCX document 14 KB Posted
- Attached to
- BOBBIN PROBE Federal contract opportunity
- Solicitation number
- SPMYM2-23-Q-1743
About this file
This document specifies technical requirements for eddy current inspection probes to be used on condenser tubing. The Defense Logistics Agency Land and Maritime is soliciting proposals under solicitation number SPMYM2-23-Q-1743 for the manufacturing of various eddy current inspection probes including flexible U-bend bobbin probes, ball joint flex U-bend bobbin probes, straight section bobbin probes, CXB4 and CXB6 array bobbin probes, and XP12 array and bobbin probes. Probe specifications include diameter, coil winding type, center frequency, length, and intended use for inspecting tube IDs ranging from 0.480 to 0.620 inches. All probes must be manufactured by Zetec and incorporate a 36 pin Amphenol connector for compatibility with existing Zetec MIZ-200 Eddy Current Acquisition Systems. Probes will be subject to manufacturing quality checks to ensure proper operation prior to delivery.
The document provides detailed technical requirements for 27 different eddy current inspection probe part numbers to be manufactured for the Defense Logistics Agency Land and Maritime's condenser tubing inspection needs. Specifications cover probe type, dimensions, frequencies, material compositions and intended applications. Manufacturers will need to meet these standards and interface requirements to be eligible for the solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOLICITATION SPMYM2-23-Q-1743.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Eddy Current Inspection Probes Salient JML 31646930 – 31646939 and 31656930 - 31656934
The probes listed below have to be manufactured by Zetec (OEM) and will be utilized to perform eddy current bobbin and array inspection on condenser tubing. Manufacturer shall ensure a manufacturing quality check is performed on each probe to ensure proper operation. All probes will have a 36 pin Amphenol connector and the capability to be detected and identified by the existing Zetec MIZ-200 Eddy Current Acquisition Systems.
1 each P/N ULC-041 – Flexible U-bend Bobbin Probe, Diameter: 0.560”, used to inspect tube ID of 0.620”, LF Coil Winding, Poly Type 3/8T, Length: 80ft
1 each P/N BJF-031 – Ball Joint Flex U-bend Bobbin Probe, Diameter: 0.520”, LF Coil Winding, Center Frequency: 45KHz, Poly Type 5/16T, Length: 50 ft, bead length will be 21.9”
2 each P/N CBS-149 – Straight Section Bobbin Probe, Chamfered Barnacle Scraper, Diameter: 0.490”, MR Coil Winding, Center Frequency: 371 KHz, Poly Type 5/16H, Length: 50 ft
1 each P/N CBS-147 – Straight Section Bobbin Probe, Chamfered Barnacle Scraper, Diameter: 0.480”, MR Coil Winding, Center Frequency: 397 KHz, Poly Type 5/16H, Length: 50 ft
1 each P/N MBS-003 – Straight Section Bobbin Probe, Mag Biased Barnacle Scraper, Diameter: 0.480”, MR Coil Winding, Poly Type 5/16T, Length: 50 ft
2 each P/N BJF-013 – Ball Joint Flex U-bend Bobbin Probe, Diameter: 0.420”, MR Coil Winding, Poly Type 5/16T, Length: 50 ft, 28” bead length
2 each P/N CXB4-024 – Straight Section CXB4 Array Bobbin Probe, Titanium Sleeve and Centering Feet, Diameter: 0.490in, used to inspect tube ID of 0.527”, Coil: 2x14 Array/Mid Frequency Bobbin; Poly Type 3/8T, Length: 50ft
1 each P/N CXB4-032 – Straight Section CXB4 Array Bobbin Probe, w/Titanium Sleeve and Centering Feet, Diameter: 0.480in, used to inspect tube ID of 0.527”, Coil: 2x14 Array/Mid Frequency Bobbin; Poly Type 3/8T, Length: 50ft
2 each P/N CXB4-012 – Straight Section CXB4 Array Bobbin Probe, w/Titanium Sleeve and Centering Feet, Diameter: 0.570in, used to inspect tube ID of 0.620”, Coil: 2x16 Array/Low Frequency Bobbin, Poly Type 3/8T, Length: 50ft
2 each P/N CXB6-006 – Straight Section CXB6 Mag Biased Array and Mag Biased Bobbin Probe, w/Titanium Sleeve and Centering Feet, Diameter: 0.570in, used to inspect tube ID of 0.620”, Coil: 2x16 Array/Low Frequency Bobbin, Poly Type 3/8T; Length: 50ft
2 each P/N CXB6-007 – Straight Section CXB6 Mag Biased Array and Mag Biased Bobbin Probe, w/Titanium Sleeve and Centering Feet, Diameter: 0.560in, used to inspect tube ID of 0.620”, Coil: 2x16 Array/Low Frequency Bobbin, Poly Type 3/8T, Length: 50ft
1 each P/N CXB6-002 – Straight Section CXB6 Mag Biased Array and Mag Biased Bobbin Probe, w/Titanium Sleeve and Centering Feet, Diameter: 0.490in, used to inspect tube ID of 0.527”, Coil: 2x14 Array/Mid Frequency Bobbin, 397KHz Center Frequency, Poly Type 3/8T, Length: 50ft
1 each P/N CXB6-008 – Straight Section CXB6 Mag Biased Array and Mag Biased Bobbin Probe, w/Titanium Sleeve and Centering Feet, Diameter: 0.480in, used to inspect tube ID of 0.527”, Coil: 2x14 Array/Mid Frequency Bobbin, Poly Type 3/8T, Length: 50ft
1 each P/N XP12-010 – Flexible XP12 Array and Bobbin Probe, no sleeve over differential bobbin and no nose section, Diameter: 0.490 in, used to inspect tube ID of 0.527”, Coil: 2x14 Array/Mid Frequency Bobbin, Poly Type 3/8T, Length: 50ft
2 each P/N XP12-011 – Flexible XP12 Array and Bobbin Probe, no sleeve over differential bobbin and no nose section, Diameter: 0.570 in, used to inspect tube ID of 0.620”, Coil: 2x16 Array/Low Frequency Bobbin, Poly Type 3/8T, Length: 50ft
File details come from the government source that posted it. Updated .