SPECIFICATIONS.docx
DOCX document 16 KB Posted
- Attached to
- COVERALL Federal contract opportunity
- Solicitation number
- SPMYM2-23-Q-2084
About this file
This document contains specifications for four contract line item numbers (CLINs) for flame-resistant coveralls. The specifications detail requirements for style, color, material blend, weight, weave, finishes, fasteners, collars, pockets, foot stirrups, size dimensions, workmanship, special instructions, and markings. Coveralls must be one-piece outfits in medium green, made of 65% polyester and 35% cotton weighing 5.5 to 8 ounces. All seams must be double stitched and finished. Fasteners are required for various closures. Sizes range from medium to triple extra-large. Coveralls must be preshrunk and labeled with the manufacturer's name. The related federal contract opportunity is solicitation number SPMYM2-23-Q-2084 for coveralls through the Defense Logistics Agency Land and Maritime agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOLICITATION SPMYM2-23-Q-2084.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NIIN: LLS048930 DOC: 32147931 – CLIN 0001
SPECIFICATION FOR FME COVERALLS
1. Style: 1 piece outfit
2. Color: Medium green.
3. Material Blend: 65% Polyester and 35% Cotton.
4. Material Weight: 5.5 to 8 ounce preshrunk cotton.
5. Material Weave: Commercial practice similar to two up, one down, right or left twill.
6. Finish: All seams shall be double seams and completely finished.
7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:
a. The front of the coveralls.
b. Sealing the pant cuffs
c. Sealing the sleeve cuffs
d. Sealing the top of the pocket
8. Collar: A full collar.
9. Pocket: A Front pocket on left chest, standard size.
NOTE: No other pockets or through holes.
10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.
11. Size Dimensions: All dimensions and tolerances are expressed in inches.
Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE Chest (a) 46 50 54 60 64 +/- 1 Leg Inseam (b) 30 30 32 32 36 +/- ½ Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2 NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.
(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.
(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.
(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.
12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.
13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.
14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.
15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet. A certificate of compliance shall be submitted for the following requirement with each shipment:
i. Item (13) Special Instructions
NIIN: LLS048919 DOC: 32147928 – CLIN 0002
NSN:
1. Style: 1 piece outfit
2. Color: Medium green.
3. Material Blend: 65% Polyester and 35% Cotton.
4. Material Weight: 5.5 to 8 ounce preshrunk cotton.
5. Material Weave: Commercial practice similar to two up, one down, right or left twill.
6. Finish: All seams shall be double seams and completely finished.
7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:
a. The front of the coveralls.
b. Sealing the pant cuffs
c. Sealing the sleeve cuffs
d. Sealing the top of the pocket
8. Collar: A full collar.
9. Pocket: A Front pocket on left chest, standard size.
NOTE: No other pockets or through holes
10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.
11. Size Dimensions: All dimensions and tolerances are expressed in inches.
Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE Chest (a) 46 50 54 60 64 +/- 1 Leg Inseam (b) 30 30 32 32 36 +/- ½ Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2
NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.
(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.
(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.
(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.
12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.
13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.
14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.
15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet. A certificate of compliance shall be submitted for the following requirement with each shipment:
NIIN: LLS048920 DOC: 32147929 – CLIN 0003
NSN:
1. Style: 1 piece outfit
2. Color: Medium green.
3. Material Blend: 65% Polyester and 35% Cotton.
4. Material Weight: 5.5 to 8 ounce preshrunk cotton.
5. Material Weave: Commercial practice similar to two up, one down, right or left twill.
6. Finish: All seams shall be double seams and completely finished.
7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:
a. The front of the coveralls.
b. Sealing the pant cuffs
c. Sealing the sleeve cuffs
d. Sealing the top of the pocket
8. Collar: A full collar.
9. Pocket: A Front pocket on left chest, standard size.
NOTE: No other pockets or through holes
10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.
11. Size Dimensions: All dimensions and tolerances are expressed in inches.
Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE Chest (a) 46 50 54 60 64 +/- 1 Leg Inseam (b) 30 30 32 32 36 +/- ½ Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2
NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.
(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.
(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.
(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.
12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.
13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.
14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.
15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet. A certificate of compliance shall be submitted for the following requirement with each shipment:
NIIN: LLS050137 DOC: 32147933 – CLIN 0004
NSN: DOC:
1. Style: 1 piece outfit
2. Color: Medium green
3. Material Blend: 65% Polyester and 35% Cotton.
4. Material Weight: 5.5 to 8 ounce preshrunk cotton.
5. Material Weave: Commercial practice similar to two up, one down, right or left twill.
6. Finish: All seams shall be double seams and completely finished.
7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:
a. The front of the coveralls.
B. Sealing the pant cuffs
c. Sealing the sleeve cuffs
d. Sealing the top of the pocket
8. Collar: A full collar, 4-1/2 inches plus or minus ½ inch wide.
9. Pocket: A Front pocket on left chest, standard size.
NOTE: No other pockets or through holes
10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.
11. Size Dimensions: All dimensions and tolerances are expressed in inches.
Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE Chest (a) 46 50 54 60 64 +/- 1 Leg Inseam (b) 30 30 32 32 36 +/- ½ Sleeve Inseam © 20 20 20 20 24 +/- 1/2 NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.
(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.
(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.
© Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.
12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.
13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.
14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.
15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet. A certificate of compliance shall be submitted for the following requirement with each shipment:
File details come from the government source that posted it. Updated .