Specifications.docx

DOCX document 14 KB Posted

Attached to
MULTISPECTRAL CAMERA SYSTEM Federal contract opportunity
Solicitation number
140G0123Q0221
Issued by
Department of the Interior US Geological Survey Office of Acquisitions and Grants

About this file

This document outlines specifications for a multispectral camera system solicitation. The solicitation seeks a camera system with a 12 megapixel color camera, 12 megapixel near infrared camera, and 640x512 pixel long wave infrared camera. The system must also include a GPS/IMU unit meeting specified accuracy standards, on-board image processing and georeferencing capabilities, and auto-exposure and acquisition features. Additional requirements include storage, power supply, operating environment tolerances, and form factor restrictions. Software, cables, and a one terabyte SSD for data storage must be provided. The delivery date is set for two weeks after award or September 1, 2023, whichever is sooner, to the U.S. Geological Survey in Golden, Colorado.

View the file

Other files for this federal contract opportunity

Other files attached to MULTISPECTRAL CAMERA SYSTEM, newest first.
File Type Posted
Sol_140G0123Q0221.pdf PDF
A08_508Check.docx DOCX document
A08_FISMA_Form.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Specifications --

A. Multispectral camera system specifications:

•1 color (RGB) camera core with minimum resolution of 12 MP
•1 near-infrared camera core with a minimum resolution of 12 MP
•1 long wave infrared camera with a minimum resolution of 640 x 512 pixels
•Multiple lens options

B. GPS/IMU with equal to or better than the following specifications:

•Dynamic Heading Accuracy – 0.2°
•Gyro In-Run Bias Stability – 5-7°/hour
•Position, Velocity and Attitude Data – 400 Hz
•IMU Data – max 800 Hz
•Dynamic Pitch/Roll Accuracy (INS) – 0.03°
•Accel In-Run Bias Stability – < 0.04 mg
•Horizontal / Vertical Position Accuracy – 1.0 m / 1.5 m

C. Photogrammetry Capabilities:

•On-board image processing
•Real-time georeferencing
•GeoTiff creation
•On-board digital elevation model capability
•Multi-camera band alignment
•Simultaneous image exposure within 100 microseconds

D. Automated Image Acquisition Capabilities:

•Auto-exposure designed for aerial capture ensures consistent exposures
•Auto-trigger options include set frame rate, percent overlap, or external trigger
•Auto-target by area of interest using built-in GNSS
•Captures metadata and precise GNSS timestamp with each frame

E. General Specifications:

•Input power – 24 DC
•Can run off a 5S or 6S LiPo/LiFe battery
•Imagery Offload – Gigabit ethernet, WiFi,
•Internal Storage – SSD, 1 TB
•Image formats – RAW, GeoTIFF, JPEG
•Frame rate – 4 Frames per second or better
•Trigger Timing – Fixed interval, % overlap, external
•Timestamp accuracy – < 100 µs
•Global electronic shutter

F. Physical and Environmental Specifications:

•Height < 12 cm, Width < 12 cm, Depth < 10 cm without lenses
•Weight < 700 g without lenses
•Operating environment -30° - 70° C
•Fully sealed weatherproof housing

5.0 DELIVERABLES

•Compute and control modules
•SSD: 1TB
•GPS/IMU: Integrated
•1 x 12MP Color Camera Core
•1 x 12MP NIR Camera Core
•1 x LWIR sensor 640x512 pixels
•Camera Power/Aux Cable
•Camera Ethernet Cable
•Camera software (internal; flight planning; post processing)* See Section 7. FISMA IT-Security Guidelines
•All software or hardware purchased must be free of malicious code such as viruses, Trojan horse programs, worms, spyware, etc. Validation of this must be written into the contract.

Delivery Date: Two weeks after award or September 1, 2023, whichever date is sooner

Delivery Address: U.S. Geological Survey, 4620 Technology Drive, Suite 400, Golden, CO 80403

File details come from the government source that posted it. Updated .