Specifications.doc

STATEMENT OF WORK

TITLE: 5G Scanners LAB REQUESTING PURCHASE: Communications Technology Laboratory, Public Safety Communications Research Division

I. BACKGROUND INFORMATION

Public Safety Communications Research (PSCR) has built a 700-MHz Public Safety Broadband Demonstration Network to provide manufacturers and first responders a location for early deployment of their systems in a multi-vendor, neutral, host environment. This network is currently being upgraded to fifth generation (5G) New Radio (NR) capabilities.

II. SCOPE

Upgrade one (1) PCTEL MXflex scanning receiver currently being used by PSCR with software to support 5G NR standards.

Procure one (1) PCTEL HBflex scanner capable of measuring millimeter wave (mmW) signals up to 40 GHz. Purchasing a mmW capable scanner of the same manufacturer as the MXflex will enable PSCR to share software between the two units.

III. SPECIFICATIONS

1. The Contractor shall upgrade one (1) existing, NIST owned, scanning receiver in accordance with the following:

1.1. Model: PCTEL MXflex; Part Number 07904SNR; Serial Number: 71912004.

1.2. Current Configuration

1.3. The Contractor shall upgrade the scanning receiver with the following software options. Existing options will be retained. The upgrade will be performed at NIST with PCTEL assistance as needed.

1.4. Software support as follows shall be provided for five (5) years.

1.4.1. OPS149-F SeeHawk Collect Annual Maintenance Software Support for Transferable License.

1.4.2. OPS168-F SeeHawk Collect with Reports Annual Maintenance Software Support for Transferable License.

1.5. One half day of Scanner Receiver Training on SeeHawk Collect shall be provided for four (4) people (option OPT007-WEB/H). Training may be supplied remotely or in-person at NIST site as feasible.

1.6. Full calibration traceable to NIST standards (option OPS145) shall be provided on 03/19/2022 and 03/19/2024.

2. The Contractor shall provide one (1) HBflex mmW Scanning Receiver with the following options:

Includes:

OP309 - Power Cable, Car lighter ( 9') OP204 - USB data Cable OP034H - GPS Antenna OP451 - 450-6000 MHz Multi-Band Mag Mount Antenna ( 12') (Qty 2) OP313 - Kit, Omni Antenna for mmWave (4.5-40 GHz), includes Antenna, Magnetic Mount and 1m pigtail cable (Qty 2)

OP301-1: 1 meter mmWave-band cable (Qty 2)

OP304-BP - HBflex Backpack package (includes backpack and telescopic antenna mounts)

OP417- HBflex Battery Pack

OP691 Indoor Antenna, 600 MHz - 6 GHz (Qty 2)

2.1. Extended warranty period-of-performance shall be five (5) years from date of purchase.

2.2. Full calibration certificate traceable to PSCR standards (option OPS164) shall be provided at time of delivery. PSCR shall send the device to the manufacturer two years ARO and 4 years ARO for calibration. The cost for calibration shall be included in the initial purchase.

IV. PLACE OF PERFORMANCE

Equipment shall be shipped at the Contractor’s expense to NIST/PSCR. Equipment to be calibrated will be shipped, at the expense of NIST/PSCR, to the Contractor’s facility.

V. PERFORMANCE REQUIREMENT SUMMARY

The Contractor shall provide certification of calibration, along with results of all required tests/measurement data.

VI. DELIVERY

Upgrades and software/hardware deliveries to be completed NLT 90 days ARO. The Contractor shall deliver the hardware to:

MS 671

325 Broadway

Boulder, CO 80305

VII. WARRANTY/SOFTWARE SUPPORT

The Contractor shall provide an extended warranty and software support to include protection against instrument failure and accredited calibrations for the instruments for five (5) years from the date of acceptance.

VIII. STANDARDS FOR ACCEPTANCE OF DELIVERABLES

The Technical Point of Contact (TPOC) will verify the delivery is as expected prior to acceptance and final payment.